-
Notifications
You must be signed in to change notification settings - Fork 390
Contrail Qos Extension for Neutron
This blueprint gives details about the list of QoS features that the Contrail Neutron API will support in the Contrail 4.0 release.
Contrail vRouter data path supports different QoS features such as marking, mapping to forwarding class, from 3.x release. Bandwidth limiting and policing are not supported features yet. Details of what the data path supports can be found at https://github.com/Juniper/contrail-controller/wiki/QoS
However,the configuration of these QoS features through Horizon or the Neutron CLI was not supported since the Contrail Neutron extensions API did not implement the Neutron QoS extensions. More details on what is supported in the Neutron CLI can be found here in this blueprint. https://review.openstack.org/#/c/88599/14/specs/liberty/qos-api-extension.rst
This blueprint scheduled for Contrail 4.0 gives the details of how the Contrail Neutron Extensions will add support to the existing Neutron QoS features.
The Neutron QoS Model operates on the idea of policies and rules. Policies can be associated to a Port or a network (QosPolicy -> Port/Network). The QosPolicy can be linked to a base QosRule. New rules could be introduced by adding new submodels to QoSRule. A QoSPolicy can be associated to a VM (Interface/Port) or a complete network.
The following Neutron QoS objects are supported in the Newton release of Openstack.
QosPolicy - id, name, description, shared, tenant_id
QoSRule - id, qos_policy_id, type, direction, tenant_id
QoSBandwidthLimitRule - qos_rule_id, max_kbps, max_burst_kbps (this is derived from the QoSRule object) Details here - http://specs.openstack.org/openstack/neutron-specs/specs/liberty/qos-api-extension.html
QoSDSCPMarkingRule - Qos_Policy_id, dscp_mark (This is derived from the QosRule object) details here - https://specs.openstack.org/openstack/neutron-specs/specs/newton/ml2-qos-with-dscp.html
QosMinimumBandwidthRule - id, qos_policy_id, min_kpbs, direction`. (ToDo: To check whether egress bandwidth is supported) Details here - https://specs.openstack.org/openstack/neutron-specs/specs/newton/ml2-qos-minimum-egress-bw-support.html
The following maps how the above mentioned entities are associated with each other.
+-----------------+ +--------------------------+ +----------+
+ Port/Network + ->+-> + QOS Policy + ----> + QosRule +
+-----------------+ +--------------------------+ + ---------+
QoSBandwidthLimitRule
QoSDSCPMarkingRule
QosMinimumBandwidthRule (ToDo: Check support)
As part of the solution, the Contrail Neutron API should obtain the above mentioned Neutron entities as JSON and convert that into relevant Contrail API calls with relevant parameters that the Contrail API server understands.
In Contrail, the above Neutron model could be mapped by the following two constructs:
- Queueing on the fabric interface, which involves queues, scheduling of queues and drop policy AND
- Forwarding class, which involves marking and identifying which queue to use and thus controls how packets are sent to fabric.
Tenants have the ability to define which forwarding class their traffic can use. So, in QOS config, they can decide which packets can use what forwarding class.
QOS config object has a mapping table from incoming DSCP or .1p to forwarding class mapping. Additionally QOS config can be applied to a virtual-network, interface or network-policy.
+--------------------------+ +---------------------+ +----------+
+ QOS config object + ----> + Forwarding class + ----> + Queue +
+--------------------------+ +---------------------+ + ---------+
* If interface sends a IP packet to another VM in remote compute node, then this DSCP value in IP header value would be used to look up in cos-config table, and the tunnel header would be marked with DSCP, 802.1p and MPLS EXP bit as specified by forwarding-class.
* If VM sends a layer 2 non IP packet with 802.1p value, then corresponding 802.1p value would be used to look into qos-config table and corresponding forwarding-class DSCP, 802.1p and MPLS EXP value would be written to tunnel header.
* If VM sends an IP packet to VM in same compute node, then DSCP value in IP header would be matched in qos-config and corresponding forwarding class would be used to overwrite IP header with new DSCP value and 802.1p value.
The following Neutron CLIs are introduced (valid from Newton)
neutron qos-policy-list
neutron qos-policy-create <policy-name> [--description policy-description]
[--shared True]
neutron qos-policy-update <policy-name-or-id> [--description ....]
[--name ...]
neutron qos-policy-show <policy-name-or-id>
neutron qos-policy-delete <policy-name-or-id>
neutron qos-dscp-marking-rule-create <policy-id> –dscp_mark <value>
neutron qos-dscp-marking-rule-show <mark-rule-id> <policy-id>
neutron qos-dscp-marking-rule-list <policy-id>
neutron qos-dscp-marking-rule-update <mark-rule-id> <policy-id> –dscp_mark <value>
neutron qos-dscp-marking-rule-delete <mark-rule-id> <policy-id>
neutron port-create NET-NAME-OR-ID --qos-policy <policy-name-or-id> ...
neutron net-create NAME --qos-policy <policy-name-or-id> ....
neutron port-update <port-id> --qos-policy <policy-name-or-id>
neutron net-update <net-name-or-id> --qos-policy <policy-name-or-id>
neutron port-update <port-id> --no-qos-policy
a. When a Neutron QosPolicy is created, a corresponding call to create Contrail QosConfig object along with a default Contrail QoSForwardingClass and the QosConfig object and the QosForwardingClass is linked.
b. When a Neutron QosRule is created, a corresponding call to create Contrail QosQueue object is created and linked with the Contrail QosForwardingClass that was created in the previous step.
c. When a Neutron attach policy to a port/network is configured, then we will attach the Contrail QosConfig object to the corresponding VMI or VN.
First, create a QoS policy and its bandwidth limit rule:
neutron qos-policy-create bw-limiter
Created a new policy:
+-------------+--------------------------------------+
| Field | Value |
+-------------+--------------------------------------+
| description | |
| id | 0ee1c673-5671-40ca-b55f-4cd4bbd999c7 |
| name | bw-limiter |
| rules | |
| shared | False |
| tenant_id | 85b859134de2428d94f6ee910dc545d8 |
+-------------+--------------------------------------+
$ neutron qos-bandwidth-limit-rule-create bw-limiter --max-kbps 3000 \
--max-burst-kbps 300
Created a new bandwidth_limit_rule:
+----------------+--------------------------------------+
| Field | Value |
+----------------+--------------------------------------+
| id | 92ceb52f-170f-49d0-9528-976e2fee2d6f |
| max_burst_kbps | 300 |
| max_kbps | 3000 |
+----------------+--------------------------------------+
Second, associate the created policy with an existing neutron port. In order to do this, user extracts the port id to be associated to the already created policy. In the next example, we will assign the bw-limiter policy to the VM.
$ neutron port-update 88101e57-76fa-4d12-b0e0-4fc7634b874a --qos-policy bw-limiter
Updated port: 88101e57-76fa-4d12-b0e0-4fc7634b874a
Ranjeet Ramalingam rranjeet@juniper.net
Contrail QoS documentation needs to be modified to add the above mentioned ways to configure QoS. Currently, new nova flavours with the relevant libvirt parameters are used to provision QoS parameters.
[1] Contrail QoS Wiki - https://github.com/Juniper/contrail-controller/wiki/QoS
[2] Neutron QoS API Models and Extension - https://specs.openstack.org/openstack/neutron-specs/specs/liberty/qos-api-extension.html
[3] Supported Openstack QoS Config - http://docs.openstack.org/mitaka/networking-guide/config-qos.html
[4] - Neutron QoS DSCP Mapping - https://specs.openstack.org/openstack/neutron-specs/specs/newton/ml2-qos-with-dscp.html