MILENAGE

MILENAGE algorithm implemented in the Go Programming Language.

Quickstart

Initialize Milenage first with K, OP, RAND, SQN, and AMF.

mil := milenage.New(
	// K
	[]byte{0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff},
	// OP
	[]byte{0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff},
	// RAND
	[]byte{0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff},
	0x000000000001, // SQN
	0x8000,         // AMF
)

Or, with OPc.

mil := milenage.NewWithOPc(
	// K
	[]byte{0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff},
	// OPc
	[]byte{0x62, 0xe7, 0x5b, 0x8d, 0x6f, 0xa5, 0xbf, 0x46, 0xec, 0x87, 0xa9, 0x27, 0x6f, 0x9d, 0xf5, 0x4d},
	// RAND
	[]byte{0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff},
	0x000000000001, // SQN
	0x8000,         // AMF
)

Get MAC-A and MAC-S. This also fills each field.

macA, err := mil.F1()
if err != nil {
	// ...
}

macS, err := mil.F1Star()
if err != nil {
	// ...
}

Get RES, CK, IK, AK. This also fills each field.

res, ck, ik, ak, err := mil.F2345()
if err != nil {
	// ...
}

Get RES* for 5G with ComputeRESStar() by giving MCC and MNC.

resStar, err := mil.ComputeRESStar("001", "01")
if err != nil {
	// ...
}

Get OPc from K and OP. This is not the method on *Milenage. An example program can be found here.

opc, err := milenage.ComputeOPc(
	[]byte{0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff},
	[]byte{0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff},
)
if err != nil {
	// ...
}

Get AUTN and AUTS which are used in authentication procedure. Be sure that the required calculation has done before calling these methods.

autn, err := mil.GenerateAUTN()
if err != nil {
	// ...
}

// Note that this re-calcurates MAC-S and AKS with AMF=0x0000
// as described in 6.3.3, TS 33.102.
auts, err := mil.GenerateAUTS()
if err != nil {
	// ...
}

Fill all fields(except 5G RES*) at once using ComputeAll(). Be sure that this uses the bare AMF value in *Milenage and the MAC-S value might be a unwanted one. Call each function with the right parameters to get the right values.

if err := mil.ComputeAll(); err != nil {
	// ...
}

Notes

This implementation may not pass all of the test cases defined in TS 35.207 because it contains a case whose payload to compute is not aligned to byte, which I believe won't happen in the real-world implementation as of 2022.

Author

Yoshiyuki Kurauchi (Website / Twitter)

License

MIT