zlib 1.3

CMakeLists.txt

@@ -3,7 +3,7 @@ set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON)
 
 project(zlib C)
 
-set(VERSION "1.2.13.1")
+set(VERSION "1.3")
 
 set(INSTALL_BIN_DIR "${CMAKE_INSTALL_PREFIX}/bin" CACHE PATH "Installation directory for executables")
 set(INSTALL_LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib" CACHE PATH "Installation directory for libraries")

ChangeLog

@@ -1,8 +1,23 @@
 
                 ChangeLog file for zlib
 
-Changes in 1.2.13.1 (xx Oct 2022)
-- 
+Changes in 1.3 (18 Aug 2023)
+- Remove K&R function definitions and zlib2ansi
+- Fix bug in deflateBound() for level 0 and memLevel 9
+- Fix bug when gzungetc() is used immediately after gzopen()
+- Fix bug when using gzflush() with a very small buffer
+- Fix crash when gzsetparams() attempted for transparent write
+- Fix test/example.c to work with FORCE_STORED
+- Rewrite of zran in examples (see zran.c version history)
+- Fix minizip to allow it to open an empty zip file
+- Fix reading disk number start on zip64 files in minizip
+- Fix logic error in minizip argument processing
+- Add minizip testing to Makefile
+- Read multiple bytes instead of byte-by-byte in minizip unzip.c
+- Add memory sanitizer to configure (--memory)
+- Various portability improvements
+- Various documentation improvements
+- Various spelling and typo corrections
 
 Changes in 1.2.13 (13 Oct 2022)
 - Fix configure issue that discarded provided CC definition
@@ -1448,7 +1463,7 @@ Changes in 0.99 (27 Jan 96)
 - fix typo in Make_vms.com (f$trnlnm -> f$getsyi)
 - in fcalloc, normalize pointer if size > 65520 bytes
 - don't use special fcalloc for 32 bit Borland C++
-- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
+- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc.
 - use Z_BINARY instead of BINARY
 - document that gzclose after gzdopen will close the file
 - allow "a" as mode in gzopen

Makefile.in

@@ -28,7 +28,7 @@ CPP=$(CC) -E
 
 STATICLIB=libz.a
 SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.13.1
+SHAREDLIBV=libz.so.1.3
 SHAREDLIBM=libz.so.1
 LIBS=$(STATICLIB) $(SHAREDLIBV)
 

README

@@ -1,6 +1,6 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.13.1 is a general purpose data compression library.  All the code is
+zlib 1.3 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
@@ -31,7 +31,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
 issue of Dr.  Dobb's Journal; a copy of the article is available at
 https://marknelson.us/posts/1997/01/01/zlib-engine.html .
 
-The changes made in version 1.2.13.1 are documented in the file ChangeLog.
+The changes made in version 1.3 are documented in the file ChangeLog.
 
 Unsupported third party contributions are provided in directory contrib/ .
 
@@ -83,7 +83,7 @@ Acknowledgments:
 
 Copyright notice:
 
- (C) 1995-2022 Jean-loup Gailly and Mark Adler
+ (C) 1995-2023 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages

configure

@@ -44,8 +44,6 @@ STATICLIB=libz.a
 
 # extract zlib version numbers from zlib.h
 VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < ${SRCDIR}zlib.h`
-VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < ${SRCDIR}zlib.h`
-VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < ${SRCDIR}zlib.h`
 VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < ${SRCDIR}zlib.h`
 
 # establish commands for library building
@@ -265,7 +263,7 @@ if test "$gcc" -eq 1 && ($cc -c $test.c) >> configure.log 2>&1; then
         SHAREDLIB=libz$shared_ext
         SHAREDLIBV=libz.$VER$shared_ext
         SHAREDLIBM=libz.$VER1$shared_ext
-        LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"}
+        LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER"}
         if "${CROSS_PREFIX}libtool" -V 2>&1 | grep Apple > /dev/null; then
             AR="${CROSS_PREFIX}libtool"
         elif libtool -V 2>&1 | grep Apple > /dev/null; then

contrib/delphi/ZLib.pas

@@ -152,7 +152,7 @@ procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
   const OutBuf: Pointer; BufSize: Integer);
 
 const
-  zlib_version = '1.2.13.1';
+  zlib_version = '1.3.0';
 
 type
   EZlibError = class(Exception);

contrib/dotzlib/DotZLib/UnitTests.cs

@@ -156,7 +156,7 @@ public class InfoTests
         public void Info_Version()
         {
             Info info = new Info();
-            Assert.AreEqual("1.2.13.1", Info.Version);
+            Assert.AreEqual("1.3.0", Info.Version);
             Assert.AreEqual(32, info.SizeOfUInt);
             Assert.AreEqual(32, info.SizeOfULong);
             Assert.AreEqual(32, info.SizeOfPointer);

contrib/infback9/inftree9.c

@@ -1,5 +1,5 @@
 /* inftree9.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2022 Mark Adler
+ * Copyright (C) 1995-2023 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate9_copyright[] =
-   " inflate9 1.2.13.1 Copyright 1995-2022 Mark Adler ";
+   " inflate9 1.3 Copyright 1995-2023 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -59,7 +59,7 @@ int inflate_table9(codetype type, unsigned short FAR *lens, unsigned codes,
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
         130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
-        133, 133, 133, 133, 144, 77, 76};
+        133, 133, 133, 133, 144, 198, 203};
     static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
         65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,

contrib/minizip/configure.ac

@@ -1,7 +1,7 @@
 #                                               -*- Autoconf -*-
 # Process this file with autoconf to produce a configure script.
 
-AC_INIT([minizip], [1.2.13.1], [bugzilla.redhat.com])
+AC_INIT([minizip], [1.3.0], [bugzilla.redhat.com])
 AC_CONFIG_SRCDIR([minizip.c])
 AM_INIT_AUTOMAKE([foreign])
 LT_INIT

contrib/pascal/zlibpas.pas

@@ -10,7 +10,7 @@
 interface
 
 const
-  ZLIB_VERSION = '1.2.13.1';
+  ZLIB_VERSION = '1.3.0';
   ZLIB_VERNUM  = $12a0;
 
 type

contrib/vstudio/readme.txt

@@ -1,4 +1,4 @@
-Building instructions for the DLL versions of Zlib 1.2.13.1
+Building instructions for the DLL versions of Zlib 1.3.0
 ========================================================
 
 This directory contains projects that build zlib and minizip using

contrib/vstudio/vc10/zlib.rc

@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1, 2, 13, 1
-  PRODUCTVERSION 1, 2, 13, 1
+  FILEVERSION	 1, 3, 0, 0
+  PRODUCTVERSION 1, 3, 0, 0
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,12 +17,12 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.13.1\0"
+      VALUE "FileVersion",	"1.3.0\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlibwapi.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"
       VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
-      VALUE "LegalCopyright", "(C) 1995-2022 Jean-loup Gailly & Mark Adler\0"
+      VALUE "LegalCopyright", "(C) 1995-2023 Jean-loup Gailly & Mark Adler\0"
     END
   END
   BLOCK "VarFileInfo"

contrib/vstudio/vc10/zlibvc.def

@@ -1,7 +1,7 @@
 LIBRARY
 ; zlib data compression and ZIP file I/O library
 
-VERSION		1.2
+VERSION		1.3
 
 EXPORTS
         adler32                                  @1

contrib/vstudio/vc11/zlib.rc

@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1, 2, 13, 1
-  PRODUCTVERSION 1, 2, 13, 1
+  FILEVERSION	 1, 3, 0, 0
+  PRODUCTVERSION 1, 3, 0, 0
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,12 +17,12 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.13.1\0"
+      VALUE "FileVersion",	"1.3.0\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlibwapi.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"
       VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
-      VALUE "LegalCopyright", "(C) 1995-2022 Jean-loup Gailly & Mark Adler\0"
+      VALUE "LegalCopyright", "(C) 1995-2023 Jean-loup Gailly & Mark Adler\0"
     END
   END
   BLOCK "VarFileInfo"

contrib/vstudio/vc11/zlibvc.def

@@ -1,7 +1,7 @@
 LIBRARY
 ; zlib data compression and ZIP file I/O library
 
-VERSION		1.2
+VERSION		1.3
 
 EXPORTS
         adler32                                  @1

contrib/vstudio/vc12/zlib.rc

@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1, 2, 13, 1
-  PRODUCTVERSION 1, 2, 13, 1
+  FILEVERSION	 1, 3, 0, 0
+  PRODUCTVERSION 1, 3, 0, 0
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,12 +17,12 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.13.1\0"
+      VALUE "FileVersion",	"1.3.0\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlibwapi.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"
       VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
-      VALUE "LegalCopyright", "(C) 1995-2022 Jean-loup Gailly & Mark Adler\0"
+      VALUE "LegalCopyright", "(C) 1995-2023 Jean-loup Gailly & Mark Adler\0"
     END
   END
   BLOCK "VarFileInfo"

contrib/vstudio/vc12/zlibvc.def

@@ -1,7 +1,7 @@
 LIBRARY
 ; zlib data compression and ZIP file I/O library
 
-VERSION		1.2
+VERSION		1.3
 
 EXPORTS
         adler32                                  @1

contrib/vstudio/vc14/zlib.rc

@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1, 2, 13, 1
-  PRODUCTVERSION 1, 2, 13, 1
+  FILEVERSION	 1, 3, 0, 0
+  PRODUCTVERSION 1, 3, 0, 0
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,12 +17,12 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.13.1\0"
+      VALUE "FileVersion",	"1.3.0\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlibwapi.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"
       VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
-      VALUE "LegalCopyright", "(C) 1995-2022 Jean-loup Gailly & Mark Adler\0"
+      VALUE "LegalCopyright", "(C) 1995-2023 Jean-loup Gailly & Mark Adler\0"
     END
   END
   BLOCK "VarFileInfo"

contrib/vstudio/vc14/zlibvc.def

@@ -1,7 +1,7 @@
 LIBRARY
 ; zlib data compression and ZIP file I/O library
 
-VERSION		1.2
+VERSION		1.3
 
 EXPORTS
         adler32                                  @1

contrib/vstudio/vc9/zlib.rc

@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1, 2, 13, 1
-  PRODUCTVERSION 1, 2, 13, 1
+  FILEVERSION	 1, 3, 0, 0
+  PRODUCTVERSION 1, 3, 0, 0
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,12 +17,12 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.13.1\0"
+      VALUE "FileVersion",	"1.3.0\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlibwapi.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"
       VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
-      VALUE "LegalCopyright", "(C) 1995-2022 Jean-loup Gailly & Mark Adler\0"
+      VALUE "LegalCopyright", "(C) 1995-2023 Jean-loup Gailly & Mark Adler\0"
     END
   END
   BLOCK "VarFileInfo"

contrib/vstudio/vc9/zlibvc.def

@@ -1,7 +1,7 @@
 LIBRARY
 ; zlib data compression and ZIP file I/O library
 
-VERSION		1.2
+VERSION		1.3
 
 EXPORTS
         adler32                                  @1

deflate.c

@@ -1,5 +1,5 @@
 /* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2022 Jean-loup Gailly and Mark Adler
+ * Copyright (C) 1995-2023 Jean-loup Gailly and Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -52,7 +52,7 @@
 #include "deflate.h"
 
 const char deflate_copyright[] =
-   " deflate 1.2.13.1 Copyright 1995-2022 Jean-loup Gailly and Mark Adler ";
+   " deflate 1.3 Copyright 1995-2023 Jean-loup Gailly and Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot

inftrees.c

@@ -1,5 +1,5 @@
 /* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2022 Mark Adler
+ * Copyright (C) 1995-2023 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate_copyright[] =
-   " inflate 1.2.13.1 Copyright 1995-2022 Mark Adler ";
+   " inflate 1.3 Copyright 1995-2023 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -57,7 +57,7 @@ int ZLIB_INTERNAL inflate_table(codetype type, unsigned short FAR *lens,
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 77, 76};
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 198, 203};
     static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,

os400/README400

@@ -1,4 +1,4 @@
-        ZLIB version 1.2.13.1 for OS/400 installation instructions
+        ZLIB version 1.3.0 for OS/400 installation instructions
 
 1) Download and unpack the zlib tarball to some IFS directory.
    (i.e.: /path/to/the/zlib/ifs/source/directory)