Initool lets you manipulate the contents of INI files from the command line. Rather than modify an INI file in place, it prints the modified contents of the file to standard output.
initool [-i|--ignore-case] [-p|--pass-through] <command> [<arg> ...]
The following commands are available:
get <filename> [<section> [<key> [-v|--value-only]]]— retrieve data.exists <filename> <section> [<key>]— check if a section or a property exists.set <filename> <section> <key> <value>— set a property's value.delete <filename> <section> [<key>]— delete a section or a property.help— print the help message.version— print the version number.
Commands can be abbreviated to their first letter: g, e, s, d, h, v.
The global options -i/--ignore-case and -p/--pass-through must precede the command name.
When given a valid command, initool first reads the INI file filename in its entirety.
If the filename is -, initool reads standard input. For the commands get, delete, and set, it then prints to standard output the file's contents with the desired change.
For exists, it reports whether the section or the property exists through its exit status.
An INI file consists of properties (key=value lines) and sections (designated with a [section name] header line).
A property can be at the "top level" of the file (before any section headers) or in a section (after a section header).
To do something with a property, you must give initool the correct section name.
Section names and keys are case-sensitive by default.
The global option -i or --ignore-case makes commands not distinguish between lower-case and upper-case ASCII letters "A" through "Z" in section names and keys.
Do not include the square brackets in the section argument.
# Right.
initool get tests/test.ini foo
# Wrong.
initool get tests/test.ini [foo]Top-level properties (properties not in any section) are accessed by using an empty string as the section name.
The exists command with just an empty string as the argument tells you whether or not there are any top-level properties.
The section name and key can be * or _ (a "wildcard") to match anything.
Only _ works on Windows.
(Windows executables built with MoSML unavoidably expand * to a list of files.)
For example, set file.ini _ foo bar will set the key foo to the value bar in every existing section.
It will set the key foo at the top level if the file already has top-level properties.
To match a one-character section name or key that is * or _, use \* and \_ respectively.
An initial backslash is removed from the section-name and key argument.
The order in which properties appear in the INI file is preserved. A new property is added after the last property in its section.
Initool preserves INI file comments (lines where the first character that is not whitespace is either ; or #) in the output when it prints a whole file or a section.
It also preserves empty lines.
Let's replace the value of the top-level property cache in the file settings.ini from a
POSIX-compatible shell.
You can do this on FreeBSD, Linux, and macOS.
initool set settings.ini '' cache 1024 > settings.ini.new \
&& mv settings.ini.new settings.iniYou can pipeline invocations of initool to make multiple changes.
Enable pipefail in your shell
(compatibility information)
to handle errors correctly.
set -o pipefail
initool delete settings.ini test \
| initool set - '' cache 1024 > settings.ini.new \
&& mv settings.ini.new settings.iniNow let's replace the value of the top-level property cache in the file settings.ini on Windows from the Command Prompt (cmd.exe):
initool set settings.ini "" cache 1024 > settings.ini.new
if %errorlevel% equ 0 move /y settings.ini.new settings.iniYou can use pipelines in the Windows Command Prompt.
Note that the Command Prompt has no feature like pipefail.
The %errorlevel% will be that of the last command in the pipeline, which in the example below cannot fail, so an %errorlevel% check would be pointless.
This is a reason to avoid pipelines in batch files.
initool delete settings.ini test | initool set - "" cache 1024 > settings.ini.new
move /y settings.ini.new settings.iniTo retrieve only the value of a property rather than the whole property (the section, key, and value), use the flag -v or --value-only:
$ initool get tests/test.ini foo name1
[foo]
name1=foo1
$ initool get tests/test.ini foo name1 --value-only
foo1Initool defines whitespace as any mix of space and tab characters. Leading and trailing whitespace around the section name, the key, and the value is removed from the output.
As a result, the following input files are all equivalent to each other for initool and produce the same output. The output is identical to the first input.
[PHP]
short_open_tag=Off[PHP]
short_open_tag = Off [PHP]
short_open_tag = OffBecause of this, you can reformat initool-compatible INI files with the command initool get file.ini.
How nonexistent sections and properties are handled depends on the command.
get- Result: initool produces no output when the section or key does not exist.
- Exit status: 0 if the file, section, or property exists, 1 if it doesn't.
exists- Result: No output.
- Exit status: 0 if the section or property exists, 1 if it doesn't.
set- Result: The section and the property are created as needed.
- Exit status: 0.
delete- Result: Nothing is removed from the input in the output.
- Exit status: 0 if the section or property was deleted, 1 if it wasn't.
When initool encounters a line it cannot parse,
it normally exits with an error.
This prevents problems caused by working on a malformed or non-INI file:
getting bogus data out of the file and corrupting the file by applying changes.
The global option -p or --pass-through disables the error and instead makes initool read and write lines verbatim when it fails to parse them.
Like comments, verbatim lines are treated as parts of their respective sections.
Use pass-through mode at your own risk.
You will not be alerted about syntax errors.
It may lead to surprising results.
For example, if a section header contains a typo like [foo[,
the properties in that section will be treated as belonging to the previous section.
When compiled according to the instructions below, initool will assume line endings to be LF on POSIX and either LF or CR+LF on Windows. To operate on Windows files from POSIX, convert the files' line endings to LF and then back. You can do this with sed(1).
Initool is case-sensitive by default.
This means that it considers [BOOT] and [boot] different sections and foo=5 and FOO=5 properties with different keys.
The option -i/--ignore-case changes this behavior.
It makes initool treat ASCII letters "A" through "Z" and "a" through "z" as equal
when looking for sections and keys.
The case of section names and keys is preserved in the output regardless of the -i/--ignore-case option.
If a file has multiple sections with identical names or identical keys in the same section, initool preserves them. Commands act on all of them at the same time.
Initool is encoding-naive and assumes one character is one byte. It correctly processes UTF-8-encoded files when given UTF-8 command-line arguments. It exits with an encoding error if it detects the UTF-16 or UTF-32 BOM. Trying to open a UTF-16 or UTF-32 file without the BOM results in an "invalid line" error because initool is unable to parse it.
On Windows, initool will receive the command-line arguments in the encoding for your system's language for non-Unicode programs (e.g., Windows-1252), which limits what you can do with UTF-8-encoded files.
Prebuilt binaries for Linux (x86-64), macOS (ARM64 and x86-64), and Windows (x86) are attached to releases. CI also builds a set of test binaries for every Git push.
Linux and macOS binary distributions include a copy of the GNU Multiple Precision Arithmetic Library used under the GNU LGPL version 3.
BSD, Linux, and macOS binaries are not marked as executable because of a
limitation of @actions/upload-artifact.
Extract the archive and run the command
chmod +x initoolOn macOS, you may need to run the following command once you have extracted the archive:
xattr -d com.apple.quarantine initoolYou can install sysutils/initool from the FreeBSD ports tree and MacPorts.
Initool can be installed with Chocolatey:
choco install initoolInstall MLton.
It is available as the package mlton in Fedora, FreeBSD, Homebrew, MacPorts, Ubuntu 24.04, and
other repositories.
On Debian 12 and Ubuntu 22.04, you will have to build MLton from source.
Clone the repository and run make then sudo make install in it.
Initool will be installed in /usr/local/bin.
Run sudo make uninstall to remove it.
You can build and run initool using Docker.
To build a Docker image for initool,
clone the repository,
cd to its directory,
then run the build command:
docker build -t initool:latest .Wait for the build to finish. Once it succeeds, you can run initool from the Docker image you have built.
The following Docker command runs initool and gives it access to the current directory:
docker run --rm --user "$(id -u):$(id -g)" --volume "$PWD:/mnt/" --workdir /mnt/ initool:latest helpPass in arguments to initool after initool:latest.
You may notice a delay when starting initool in a Docker container.
If you plan to use initool repeatedly, you have the option to copy the binary to your Linux system. This command copies the binary to the current directory:
docker run --entrypoint /bin/sh --rm --user "$(id -u):$(id -g)" --volume "$PWD:/mnt/" --workdir /mnt/ initool:latest -c 'cp /app/initool/initool /mnt/'To build initool yourself, first install MoSML. The Windows installer is not available on the official site due to an antivirus false positive. I have mirrored the installer in an attachment to a GitHub comment.
Clone the repository and run build.cmd from its directory.
To test on Windows, download busybox-w32 as busybox.exe to the repository directory, then run test.cmd.
MIT.