Skip to content

CARLsim is an efficient, easy-to-use, GPU-accelerated software framework for simulating large-scale spiking neural network (SNN) models with a high degree of biological detail.

License

Notifications You must be signed in to change notification settings

UCI-CARL/CARLsim5

Repository files navigation

CARLsim 5

Build Status Coverage Status Docs Google group

CARLsim is an efficient, easy-to-use, GPU-accelerated library for simulating large-scale spiking neural network (SNN) models with a high degree of biological detail. CARLsim allows execution of networks of Izhikevich spiking neurons with realistic synaptic dynamics on both generic x86 CPUs and standard off-the-shelf GPUs. The simulator provides a PyNN-like programming interface in C/C++, which allows for details and parameters to be specified at the synapse, neuron, and network level.

If you use CARLsim or PyCARL in your research, please cite our papers CARLsim and PyCARL.

Chou*, T.-S., Kashyap*, H.J., Xing, J., Listopad, S., Rounds, E.L., Beyeler, M., Dutt, N., and Krichmar, J.L. (2018). "CARLsim 4: An Open Source Library for Large Scale, Biologically Detailed Spiking Neural Network Simulation using Heterogeneous Clusters." In Proceedings of IEEE International Joint Conference on Neural Networks (IJCNN), pp. 1158-1165.

Balaji, A., Adiraju, P., Kashyap, H. J., Das, A., Krichmar, J. L., Dutt, N. D., & Catthoor, F. (2020). PyCARL: A PyNN Interface for Hardware-Software Co-Simulation of Spiking Neural Network. arXiv preprint arXiv:2003.09696. (To appear in IJCNN 2020)

News

We released PyCARL which is an interface of CARLsim to the pyNN framework! Please check here for more details.

Installation

Detailed instructions for installing the latest stable release of CARLsim on Mac OS X / Linux can be found in our User Guide.

Linux/MacOS

For Beginner

  1. Download CARLsim 5 zip file by clicking on the Clone or download box in the top-right corner.

  2. Unzip the source code.

  3. Go into CARLsim5 folder

    $ cd CARLsim5
    
  4. Make and install

    $ make
    $ make install
    
  5. Verify installation

    $ cd ~
    $ ls
    

    You will see CARL folder

  6. Go back to CARLsim5 folder and start your own project! The "Hello World" project is a goot starting point for this. Make sure it runs:

    $ cd CARLsim5
    $ cd projects/hello_world
    $ make
    $ ./hello_world
    

For Advanced User and Developer

  1. Fork CARLsim 5 by clicking on the Fork box in the top-right corner.

  2. Clone the repo, where YourUsername is your actual GitHub user name:

    $ git clone --recursive https://github.com/UCI-CARL/CARLsim5.git
    $ cd CARLsim5
    

    Note the --recursive option: It will make sure Google Test gets installed.

  3. Choose between stable release and latest development version:

  4. Choose the installation directory: By default, the CARLsim library lives in ~/CARL/lib, and CARLsim include files live in ~/CARL/include. You can overwrite these by exporting an evironment variable called CARLSIM5_INSTALL_DIR:

    $ export CARLSIM5_INSTALL_DIR=/path/to/your/preferred/dir
    

    or

    $ export CARLSIM5_INSTALL_DIR=/usr/local
    

    if you want to install CARLsim library for all users.

    Also set the following evironment variable:

    $ export CUDA_PATH=/path/to/CUDA
    

    By default CUDA is installed to /usr/local/cuda in Linux systems.

  5. Make and install:

    $ make -j4
    $ sudo -E make install
    

    Note the -E flag, which will cause sudo to remember the CARLSIM5_INSTALL_DIR.

  6. In order to make sure the installation was successful, you can run the regression suite:

    $ make test
    $ ./carlsim/test/carlsim_tests
    
  7. Start your own project! The "Hello World" project is a goot starting point for this. Make sure it runs:

    $ cd projects/hello_world
    $ make
    $ ./hello_world
    

    You can easily create your own project based on this template using the init.sh script:

    $ cd projects
    $ ./init.sh project_name
    

    where project_name is the name of your new project. The script will copy all files from hello_world/ to project_name/, make all required file changes to compile the new project, and add all new files to git.

Using nvidia docker

  1. Using CARLsim5 on an Nvidia-docker image follows the instructions above. Only important thing to keep in mind is to copy the $CUDA_PATH/samples directory to the docker, which does not come with the nvidia docker image. CARLsim5 uses "helper_functions.h" from the library.

Using CMake

  1. Obtatin CARLsim5's source code.

  2. Create a build directory (you can make it anywhere)

    $ mkdir .build
    
  3. Proceed into build directory and do configuration:

    $ cd .build
    $ cmake \
        -DCMAKE_BUILD_TYPE=Release \
        -DCMAKE_INSTALL_PREFIX=/usr/local/carlsim \
        -DCARLSIM_NO_CUDA=OFF \
        <path-to-carlsim>
    

    As you can see cmake accepts several options -D<name>=<value>: they define cmake variables. CMAKE_BUILD_TYPE=Release means that we are going to build release version of the library. If you need debug version then pass Debug. CMAKE_INSTALL_PREFIX specifies a directory which we are going to install the library into. CARLSIM_NO_CUDA switches on/off support of CUDA inside the library. <path-to-carlsim> must be replaced with the path to the CARLsim5's source directory.

  4. Build:

    make -j <jobs-num>
    

    Set <jobs-num> to the number of logical processors your computer has plus one, this will employ parallel building.

  5. Install:

    make install
    

Prerequisites

CARLsim 5 comes with the following requirements:

  • (optional) CMake 3.0 or higher in case you want to build it using CMake.
  • (optional) CUDA Toolkit 6.0 or higher. For platform-specific CUDA installation instructions, please navigate to the NVIDIA CUDA Zone. This is only required if you want to run CARLsim in GPU_MODE. Make sure to install the CUDA samples, too, as CARLsim relies on the file helper_cuda.h.
  • (optional) A GPU with compute capability 2.0 or higher. To find the compute capability of your device please refer to the CUDA article on Wikipedia. This is only required if you want to run CARLsim in GPU_MODE.
  • (optional) MATLAB R2014a or higher. This is only required if you want to use the Offline Analysis Toolbox (OAT).

As of CARLsim 3.1 it is no longer necessary to have the CUDA framework installed. However, CARLsim development will continue to focus on the GPU implementation.

The latest release was tested on the following platforms:

  • Ubuntu 16.04
  • Mac OS X 10.11 (El Capitan)

About

CARLsim is an efficient, easy-to-use, GPU-accelerated software framework for simulating large-scale spiking neural network (SNN) models with a high degree of biological detail.

Resources

License

Stars

Watchers

Forks

Packages

No packages published