Skip to content

A NMEA 0183 converter for Raymarine's wireless instruments ... and much more !

License

Notifications You must be signed in to change notification settings

Rodemfr/MicronetToNMEA

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

MicronetToNMEA

Description

MicronetToNMEA is a Teensy/Arduino project aiming at converting data from Raymarine's wireless network called "Micronet" to a standard NMEA0183 stream, easily useable by your laptop or tablet software. Additionnaly, it can also transmit NMEA navigation data from your Tablet/PC to your Micronet network.

The project requires the following hardware :

  • A boat with Raymarine Wireless/Tacktick system. (The boat is not strictly required)
  • A Teensy 3.5, 3.6, 4.0 or 4.1 board.
  • A CC1101 based board. Any board should be fine as long as you can connect its SPI bus to the MCU. Take care to order a board with an antenna for 868 or 915MHz operations, not 433MHz.

Teensy 4.0 is the preferred board because it is the one used by the author to test and fix issues when they are found. Other boards are reported to also work fine anyway.

Optionally, you can add :

  • A NMEA GPS/GNSS, connected through UART to add your position, time, date, SOG and COG to Micronet displays. The most frequently used one is UBlox M8N which can be directly configured by MicronetToNMEA.
  • A LSM303DLH(C), connected through I2C to add magnetic heading to Micronet displays

The type of construction described here is fun and interesting to play with, but anyone with a little bit of experience at sea knows that it will not last long in the wet, salty and brutal environment of a sailing boat. MicronetToNMEA will abandon you just when you really need it. No garantee can of course be given that this software will do what it has been designed for. If you want a robust, reliable and extensively tested Micronet device, you should better go to your nearest Raymarine/Tacktick reseller.

Author & Contributors

  • Ronan Demoment - Rodemfr - Main author
  • Dietmar Warning - dwarning - LSM303 Compass, bugfixes & testing.
  • j-lang - UBLOX M8N Initialization code & testing.

License

MicronetToNMEA is licensed under GPLv3. See LICENSE.txt file for more details.

Compilation

The source code compiles with Arduino IDE extended by Teensyduino software package. You just have to configure the right Teensy board and to import the required libraries (TeensyTimerTool). If you plan to develop/extend MicronetToNMEA, you probably should use Visual Studio Code associated to PlatformIO plugin. It is way beyond Arduino IDE in term of productivity but is harder to set up.

Check the User Manual for more details.

Acknowledgments

Setting up HW

Supposing you use a Teensy 3.5 board, the SW is configured by default to be connected via SPI bus to a CC1101 IC with the following scheme :

CC1101     Teensy
SI     <-- Pin 11 (MOSI0)
SO     --> Pin 12 (MISO0)
SCK    <-- Pin 14 (SCK0)
CS     <-- Pin 10 (CS0)
GD0    --> Pin 24
GND    <-> GND
3.3V   <-- 3.3V

MicronetToNMEA can also collect sentences from an NMEA GPS/GNSS connected to UART 1 of the board :

GNSS     Teensy
TXD  --> Pin 0  (RX1)
RXD  <-- Pin 1  (TX1)
GND  <-> GND
3.3V <-- 3.3V

Nothing is to be done on the SW side wether a GNSS is connected or not. If the GNSS is connected, it must be configured to output a NMEA stream at 9600 baud. I use a Ublox NEO-M8N. Neo-M8N can be configured to output a NMEA stream at this baudrate by using U-Center software from U-Blox or by enabling a dedicated option in BoardConfig.h which will enable automatic configuration.

MicronetToNMEA can use a LSM303DLH(C) to provide magnetic heading on both Micronet and NMEA streams :

LSM303DLH(C)    Teensy
SCL         <-- Pin 37  (SCL1)
SDA         <-> Pin 38  (SDA1)
GND         <-> GND
3.3V        <-- 3.3V

Both LSM303DLH and LSM303DLHC can be used. MicronetToNMEA will automatically recognize it and select the appropriate driver.

If you want to use a different MCU board and/or pinout, you have to edit the related definitions at the beginning of BoardConfig.h file. User Manual explains every configuration item.

Quick Start & general guidance

Power up your Teensy board through USB. Use a terminal software like Tera Term to reach the menu on the serial console. Baudrate is meaningless on a USB bridge.

Power up your Micronet network.

The first thing to do is to calibrate the RF frequency to ensure a good range performance of the system : enter menu "Calibrate RF frequency" and follow instructions. At the end of operations, save the calibration when asked.

Now, you need to attach MicronetToNMEA to your Micronet network, for this, you have to scan existing networks (menu "Scan Micronet networks"). It will list all the detected networks in your vincinity (20-30m range max), in decreasing order of reception power. Yours is very likely at the top. Write down the identifier of your network and attach MicronetToNMEA to it with menu "Attach converter to a network".

You are now ready to convert your Micronet data to NMEA0183 with menu "Start NMEA conversion".

That's it !

Some tips :

  • Once you have attached MicronetToNMEA to a Micronet network, it will automatically enter in NMEA conversion mode at each power-up. You don't need a connect a console anymore unless you want to attach to another network.
  • When in conversion mode, if you want to come back to the configuration menu in the console, just press "ESC" key
  • MicronetToNMEA listens to calibration values transiting on the network and will apply them to the converted values (wind speed factor, temperature offset, etc.). So if you change your sensor calibration from your Micronet display, MicronetToNMEA will memorize the new value if it is in range. /!\ Be careful that these calibration values are only intercepted in NMEA conversion mode
  • Calibration values, as well as attached network ID are all saved in EEPROM so that you don't need to enter them again in the system at each power-up.
  • There is a menu "Scan surrounding Micronet traffic" allowing to scan all micronet traffic around you. This is useful to understand how devices are speaking to each other.
  • There is also a menu "Test RF quality", useful to evaluate where to put MicronetoNMEA in your boat to maximize signal strength

User manual

If you want more details on how to set-up and configure MicronetToNMEA, there is now a User Manual in the doc directory.