Skip to content

dxlAPRS extension for uploading radiosonde telemetry to SondeHub

License

Notifications You must be signed in to change notification settings

Eshco93/dxlAPRS-SHUE

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

dxlAPRS SondeHub Uploader Extension

This extension for the dxlAPRS software toolchain allows uploading of radiosonde telemetry data to SondeHub.

Introduction

When operating an amateur radiosonde receiver station, there are a bunch of different software solutions to choose from. Examples would be radiosonde_auto_rx by Mark Jessop (VK5QI), dxlAPRS by Christian Rabler (OE5DXL) or rdz_ttgo_sonde by Hansi Reiser (DL9RDZ). There are certainly also a few other solutions and each of them has their own advantages and disadvantages.

Telemetry data gathered by amateur radiosonde receiver stations is often uploaded to online databases. Live radiosonde tracking websites are built, based on these databases. A few examples are radiosondy.info by Michał Lewiński (SQ6KXY), SondeHub by Project Horus and wettersonde.net by Jean-Michael Grobel (DO2JMG).

However, as you might expect, not every software allows telemetry data upload to every database. For example, dxlAPRS (as the name suggests) is APRS-based and therefore only allows uploading to APRS databases, like radiosondy.info and wettersonde.net. SondeHub, which is not based on APRS, is therefore not supported by dxlAPRS.

This is where this extension of dxlAPRS comes in to play. It takes the telemetry data provided by dxlAPRS and uploads it to the SondeHub database.

Theory of Operation

At its core, dxlAPRS is a so-called toolchain, i.e. a collection of independent tools that are chained together. The tools communicate with each other mostly using UDP. The following diagram shows the structure of an exemplary dxlAPRS-based radiosonde receiver station.

On the hardware side, this fairly simple radiosonde receiver station consists of a Raspberry Pi and an RTL-SDR stick. rtl_tcp, which is not part of dxlAPRS but part of rtl-sdr, provides an SDR server. sdrtst taps into this SDR server and creates receivers which send the received signals to an audio pipe. sondeudp then decodes those signals and sends the raw data to sondemod. sondemod packs the data into APRS packages and sends them to various instances of udpgate4. udpgate4 is an APRS gateway that will forward the packages to APRS databases like radiosondy.info and wettersonde.net. If you want to know more about this, I recommend visiting the website of Attila Kocis (DL1NUX). He has great tutorials on dxlAPRS.

The following diagram shows how the dxlAPRS SondeHub Uploader Extension (dxlAPRS-SHUE) is integrated into dxlAPRS.

dxlAPRS-SHUE uses the data that is sent out by sondemod via UDP. However, sondemod provides two different UDP streams that dxlAPRS-SHUE can use. On the one hand, dxlAPRS-SHUE can use the APRS packages that sondemod already sends out to various instances of udpgate4 (See above). On the other hand, dxlAPRS-SHUE can use the UDP JSON output that sondemod provides (recommended). Both options are equally easy to implement and only require a small adjustment of the configuration of sondemod (See section 5.).

The internal structure of dxlAPRS-SHUE is fairly simple, which can be seen in the next diagram.

The packages received from sondemod via UDP are stored in a queue. The stored packages are then processed once at a time, which involves parsing the data, checking for possible errors and reformatting the telemetry data to the SondeHub Telemetry Format. The reformatted telemetry data is again stored in a queue, waiting for upload to the SondeHub database. The upload takes place at fixed time intervals (See section 7.). When an upload is performed, all the telemetry data currently in the queue is uploaded at once. Another completely independent process handles the upload of the station information, which also takes place at fixed time intervals (See section 7.). Receiving, processing, telemetry uploading and station information uploading are all performed by concurrently running threads.

Setup

This section will guide you through the setup of dxlAPRS-SHUE.

1. Prerequisites

This guide assumes that you already have your dxlAPRS radiosonde receiver station up and running. If that's not yet the case, I recommend following this tutorial by Attila Kocis (DL1NUX).

2. Installing Python

dxlAPRS-SHUE is based on Python. For this reason it is necessary to have a reasonably current version of Python 3 installed. If you are using a Raspberry Pi with Raspberry Pi OS, you might already have Python 3 installed. If you're using a different system, you may have to install Python 3 yourself.

3. Python dependencies

Some of the packages that are used by dxlAPRS-SHUE are not part of the Python Standard Library. The crc package is needed for performing a CRC on incoming APRS packages. The requests package is needed for uploading the telemetry and station information data to the SondeHub database.

The crc package can be installed from PyPI using pip with the following command.

$ python -m pip install crc

The requests package can also be installed from PyPI using pip with the following command.

$ python -m pip install requests

4. Cloning the dxlAPRS-SHUE Repository

Cloning the dxlAPRS-SHUE Repository requires git to be installed. Once again, if you are using a Raspberry Pi with Raspberry Pi OS, you might already have git installed. If you're using a different system, you may have to install git yourself.

For cloning the dxlAPRS-SHUE Repository, use the following command.

$ git clone https://github.com/Eshco93/dxlAPRS-SHUE.git

You can issue this command from any directory of your system. It doesn't really matter where you put dxlAPRS-SHUE. Put it wherever you like.

5. Changing parameters for sondemod

As mentioned in the theory of operation section, dxlAPRS-SHUE can either use the APRS packages that sondemod already sends out to various instances of udpgate4 or it can use the UDP JSON output that sondemod provides. The second option is the recommended one. The reason for this is explained in all details is the additional information section.

In any case, however, the configuration of sondemod must be edited in order to use dxlAPRS-SHUE. This is done by adding another command line argument to sondemod.

Adding the following command line argument will enable the UDP JSON output of sondemod for a specific address and port (note that <ip> and <port> are just placeholders at this point).

-J <ip>:<port>

Please note that the UDP JSON output was just recently added to sondemod. If you are using an older version of sondemod, you might not have that option. In that case you might want to download the current source files and built the most recent version of sondemod yourself.

If you still decided to use the APRS packages instead of the UDP JSON output, adding the following command line argument will forward the APRS packages to another address and port (note that <ip> and <port> are just placeholders at this point).

-r <ip>:<port>

Since you are most likely running dxlAPRS-SHUE on the same system as sondemod, you usually just want to use the localhost (127.0.0.1) as your target address. Obviously you could also run both tools on different systems and use the address of the system that's running dxlAPRS-SHUE instead. The used port can be chosen relatively freely within the range of the registered ports. But the default port used by dxlAPRS-SHUE is 18001 (See section 7.).

When you are using dxlAPRS then you are probably using a startup script in order to launch all the individual tools of the dxlAPRS toolchain. Hence that would be the place to add this new sondemod command line argument. More information about those startup scripts can be found in the tutorial by Attila Kocis (DL1NUX).

This is an example of what a sondemod command in the startup script with enabled UDP JSON output would look like.

# Umwandeln der Sondendaten in AXUDP Format (SONDEMOD)
xfce4-terminal --minimize --title SONDEMOD -e 'bash -c "sondemod -o 18000 -I $SONDECALL -r 127.0.0.1:9001 -b $INTERVALLHIGH:$INTERVALL1:$INTERVALL2:$INTERVALL3 -A $ALT1:$ALT2:$ALT3 -x /tmp/e.txt -J 127.0.0.1:18001 -T 360 -R 240 -d -p 2 -M -L 6=DFM06,7=PS15,A=DFM09,B=DFM17,C=DFM09P,D=DFM17,FF=DFMx -t $DXLPATH/sondecom.txt -v -P $LOCATOR -N $HOEHE -S $DXLPATH/"' &
sleep 1

6. Modifying sondecom.txt (APRS only!)

This step is only necessary when dxlAPRS-SHUE is using the APRS packages provided by sondemod. If you are using the UDP JSON output of sondemod, you can go directly to section 7.

The sondecom.txt file can be found inside your dxlAPRS folder. The file is used by sondemod and defines which telemetry parameters sondemod adds to the comment section of each APRS package. When dxlAPRS-SHUE uses these packages, the comment section should include all telemetry parameters that are useful to dxlAPRS-SHUE. This includes the following telemetry parameters.

  • %F: sdr freq+AFC from sdrtst
  • %n: frame number
  • %s: gps sat count
  • %u: sonde uptime

The order of those telemetry parameters is not relevant to dxlAPRS-SHUE. So the line in sondecom.txt could look like this.

%F%n%s%u

You can also add more telemetry parameters if you like. dxlAPRS-SHUE doesn't use any additional telemetry parameters but they might be useful for other APRS databases that you are sending your APRS packages to. The total number of telemetry parameters is also not relevant to dxlAPRS-SHUE. If you need more information on how to edit the sondecom.txt file, I suggest that you take a look at this page of the DXL-Wiki or again at the tutorial by Attila Kocis (DL1NUX).

7. Running dxlAPRS-SHUE

When running dxlAPRS-SHUE, it must be configured properly. dxlAPRS-SHUE is configured using command line arguments. The following table gives an overview of all the command line arguments used for configuring dxlAPRS-SHUE.

Argument Description Default Range
-i Logging level for the printed log messages

Level 1: Print errors
Level 2: Print warnings
Level 3: Print processing information
Level 4: Print debug messages
Level 5: Print detailed debug messages

Each level also contains the messages of all lower levels
3 1 - 5
-j Logging level for the log messages written to the log file

Level 1: Write errors
Level 2: Write warnings
Level 3: Write processing information
Level 4: Write debug messages
Level 5: Write detailed debug messages

Each level also contains the messages of all lower levels
This argument has no effect if writing the log file is disabled
(See argument -k)
3 1 - 5
-t Runtime of the program in seconds (0 for infinite runtime)
Usually the program runs indefinitely
0 >=0
-a Address for the UDP socket (usually 127.0.0.1) 127.0.0.1 -
-p Port for the UDP socket
(See section 5.)
18001 1024 - 65353
-y Mode of the program (0 = auto-select / 1 = JSON / 2 = APRS)
(See section 5.)
0 0 - 2
-d Path for the files written by the program /dxlAPRS-SHUE/log -
-s Write the raw APRS/UDP JSON packages to a textfile (0 = no / 1 = yes)
All packages in one file with one line for each package
0 0 - 1
-w Write the telemetry data to CSV files (0 = no / 1 = yes)
One CSV file for each radiosonde
Named by it's serial with with t_ as a prefix
0 0 - 1
-z Write the reformatted telemetry data to CSV files (0 = no / 1 = yes)
One CSV file for each radiosonde
Named by it's serial with r_ as a prefix
0 0 - 1
-k Write the log to a log file (0 = no / 1 = yes) 1 0 - 1
-q Size of the queue for storing the received APRS/UDP JSON packages before processing
The size needed depends on how many radiosondes you are concurrently receiving and how fast you are able to process their incoming data
Usually the default of 20 should be well suited for all circumstances
(See theory of operation)
20 1 - 100
-f Size of the queue for storing the reformatted telemetry data before uploading
The size needed depends on how many radiosondes you are concurrently receiving and how often you are uploading the telemetry data
(See theory of operation)
200 1 - 600
-c User callsign for SondeHub
Length: 4 - 15 characters
Allowed characters: a-z, A-Z, 0-9, -, _
The dxlAPRS callsign will be used, if no callsign is provided
- -
-l Position for showing your radiosonde receiver station on the SondeHub Map
Format: lat,lon,alt
With lat and lon in decimal degrees and alt in meters
This argument is required
- -
-v Antenna name for showing in your radiosonde receiver station information on the SondeHub Map
Length: 4 - 25 characters
If your antenna description contains spaces, you need to put it in quotation marks
"1/4 wave monopole" -
-u Contact E-Mail address
Only visible for the admins of SondeHub
Will be used to contact you in case there is an obvious issue with your radiosonde receiver station
This argument is required
- -
-g Update rate for your radiosonde receiver station information on the SondeHub Map in hours
(See theory of operation)
6 1 - 24
-r Telemetry data update rate in seconds
(See theory of operation)
30 1 - 600
-o Upload timeout for telemetry data and radiosonde receiver station information in seconds 20 1 - 60
-e Max. number of upload retries for telemetry data and radiosonde receiver station information 5 0 - 60
-b List of all radiosondes enabled for upload
Separated by commas
By default upload for all radiosondes is enabled
RS41,RS92,DFM,
iMET,M10,M20,
MRZ,MEISEI
-

Here is an example of what your command for launching dxlAPRS-SHUE could look like.

python dxlAPRS-SHUE.py -i 3 -j 3 -t 0 -a 127.0.0.1 -p 18001 -y 0 -d /home/pi/dxlAPRS-SHUE/log -s 0 -w 0 -z 0 -k 1 -q 20 -f 200 -c S0MECALL -l 48.06339,11.52943,5 -v "1/4 wave monopole" -u someones@mail.com -g 6 -r 30 -o 20 -e 5 -b RS41,RS92,DFM,iMET,M10,M20,MRZ,MEISEI

Though, you don't have to configure every single parameter of dxlAPRS-SHUE. If you want to leave certain parameters at their default values, you don't have to specify them explicitly. The default value is loaded for each parameter that is not explicitly specified. The only parameters that are mandatory are -l and -u (See table above).

The default values are also loaded for incorrectly specified parameters. You will be informed about this by a warning message that is shown right after launching dxlAPRS-SHUE. A warning could look like this.

Warning: The configuration parameter "runtime" that you provided is invalid. Therefore the default was loaded (127.0.0.1)

If dxlAPRS-SHUE is launched with the command line argument -h, a help message will be printed that also explains all the available command line arguments.

python dxlAPRS-SHUE.py -h

8. Adding dxlAPRS-SHUE to your startup script

You might want to add dxlAPRS-SHUE to the startup script already mentioned in section 5. in order to launch it together with all the other dxlAPRS tools. Add the following line to the bottom of your startup script in order to launch dxlAPRS-SHUE right after lanuching all the other dxlAPRS tools (note that <command> is just a placeholder for the command as described in section 7.)

# dxlAPRS SondeHub Uploader Extension
xfce4-terminal --minimize --title dxlAPRS-SHUE -e '<command>' &

This is what the entire line for the startup script, including the command described in section 7., would look like.

# dxlAPRS SondeHub Uploader Extension
xfce4-terminal --minimize --title dxlAPRS-SHUE -e 'python dxlAPRS-SHUE.py -i 3 -j 3 -t 0 -a 127.0.0.1 -p 18001 -y 0 -d /home/pi/dxlAPRS-SHUE/log -s 0 -w 0 -z 0 -k 1 -q 20 -f 200 -c S0MECALL -l 48.06339,11.52943,5 -v "1/4 wave monopole" -u someones@mail.com -g 6 -r 30 -o 20 -e 5 -b RS41,RS92,DFM,iMET,M10,M20,MRZ,MEISEI' &

9. Adding dxlAPRS-SHUE to your stop script

If you added dxlAPRS-SHUE to your startup script as explained in section 8., you'll also want to add it to your stop script in order to stop it together with all the individual tools of the dxlAPRS toolchain. The stop script goes by the name sondestop.sh and can be found inside your dxlAPRS folder.

In order to add dxlAPRS-SHUE to your stop script, just add dxlAPRS-SHUE to the end of the line in the stop script. This is what the stop script will look like after adding dxlAPRS-SHUE.

#!/bin/bash
# Beenden aller dxlAPRS Tools
killall -9 getalmd rtl_tcp sdrtst sondeudp sondemod udpbox udpgate4 dxlAPRS-SHUE

Additional information

JSON vs. APRS

As mentioned in the theory of operation section and in section 5., dxlAPRS-SHUE can either use the APRS packages that sondemod sends out or it can use the UDP JSON output that sondemod provides. The second option is the recommended one. The reason for this lies in a fundamental difference between APRS databases, like radiosondy.info and wettersonde.net, and SondeHub.

For the APRS databases, the telemetry frames are encapsulated in APRS packages directly after receipt and immediately uploaded to the respective databases. Each telemetry frame is encapsulated and uploaded individually. This method is very inefficient and leads to large amounts of data to be uploaded. For this reason, usually not every single received telemetry frame is actually uploaded. Instead, fixed transmission intervals are used, in each of which a single telemetry frame is uploaded. All not uploaded telemetry frames are simply discarded. This is done to keep traffic to the APRS databases at a manageable level. For dxlAPRS, the transmission intervals are defined in the sondeconfig.txt file that can be found inside your dxlAPRS folder. If you need more information on how to edit the sondeconfig.txt file, I suggest that you take a look at the tutorial by Attila Kocis (DL1NUX).

SondeHub, on the other hand, works very different. In the case of SondeHub, the received telemetry frames are not uploaded individually immediately after receipt. Instead, received telemetry frames are first collected and then uploaded to SondeHub at fixed time intervals. Multiple frames are uploaded to SondeHub in a single large package. In addition, the data packages are compressed before upload. This method is very efficient and keeps transmission overhead very low. For this reason, with SondeHub it is possible and desirable that every single received telemetry frame is also uploaded.

This results in a conflict of goals when dxlAPRS-SHUE is set up to work with the APRS packages sent out by sondemod. One the one hand, you should use relatively moderate transmission intervals for the APRS packages in order to keep the traffic to the APRS databases at a managable level. On the other hand, you would like dxlAPRS-SHUE to get every single received telemetry frame, which would require to set the transmission interval to the lowest value possible. Obviously both cannot be achieved at the same time. Therefore, using dxlAPRS-SHUE with APRS packages is always a compromise solution.

An uncompromising solution is to use dxlAPRS-SHUE in conjunction with the UDP JSON output of sondemod. The UDP JSON output is usually not used. It is a purely optional output that can usually be used exclusively for dxlAPRS-SHUE. Also, the transmission intervals defined for the APRS output do not apply to the UDP JSON output. The UDP JSON output always outputs all telemetry frames. Furthermore, there is also telemetry data that is exclusively provided via UDP JSON and not via APRS. One example of this is xdata, which is telemetry provided by an external instrument attached to the radiosonde (e.g. ozone probe).

Supported radiosonde types

Regarding the supported radiosonde types, dxlAPRS-SHUE is obviously limited to all the radiosonde types that are supported by both, dxlAPRS and SondeHub. At the moment this includes the follwing radiosonde types.

  • RS41
  • RS92 (Usually no longer used)
  • IMET
  • DFM
  • M10
  • M20
  • MRZ
  • MEISEI

No temperature from DFM radiosondes

While other software solutions for radiosonde receiver stations (like radiosonde_auto_rx and rdz_ttgo_sonde) seem to at least support temperature reading from DFM radiosondes, dxlAPRS doesn't do that at the moment. Therefore telemetry data upload for DFM radiosondes is currently limited to the position data only.

Not enough frames from DFM radiosondes

SondeHub performs a basic z-test on the telemetry data that is being uploaded. Due to a quirk of the DFM radiosondes, SondeHub needs at least 10 frames of a DFM radiosonde in every uploaded telemetry package in order to perform this z-test. To ensure that, the telemetry data update rate (See section 7.) should be 20 or higher.

No meaningful RSSI values

In addition to all the other telemetry data, sondemod also provides RSSI values. And the upload of RSSI values is also supported by SondeHub. But since the values that sondemod provides are usually coming from an uncalibrated RTL-SDR stick, they do not represent anything that is even remotely close to reality. Therefore, the upload of RSSI values is currently not supported.