Device Specific Configurations
ChimeraOS's design philosophy is to cast a wide net when it comes to compatibility of hardware. The ability to install on as many configurations as possible sometimes presents the opportunity for conflicts with necessary quirks or workarounds for specific devices. As such, these are not normally enabled by default but if well understood they can be included in the image in a disabled state. This page attempts to document these quirks and how to enable them for a given device.
While we do our best to thoroughly test each device quirk that is listed here, a multitude of variables can change the efficacy and/or safety of any particular tweak. ChimeraOS and the ChimeraOS Development Team provide no guarantee that the following tweaks, quirks, workarounds, fixes, and information contained herein will not cause malfunctions or damage to the installed equipment or users. Any use of this information constitutes agreement by the user that it shall be considered at ones own risk and no liability shall be incurred on any member of the ChimeraOS Development Team or the ChimeraOS Organization. If any adverse affects are noted, please report the issue so the circumstances can be understood and the information updated and/or removed.
Issue: The display EDID is incomplete leading to certain refresh rates not working properly.
Solution: Firmware Overrides can be enabled that resolve the screen refresh rates.
Issue: Speakers are out of phase, causing distorted audio. This is due to a hardware defect from the factory
Identification: Watch this video. If the in/out of phase sections seem backwards, apply this fix.
Solutions:
1.) (v42+) Enable the systemd unit that inverts the phase of one speaker.
1.1) systemctl --user enable --now aya-air-audio
1.2) In the audio settings, select the new AYANEO device.
2.) AYANEO are offering a hardware kit with updated speakers. This will require disassembly of the unit. Contact service@ayaneo.com for information on a replacement.
Issue: The display EDID is incomplete leading to certain refresh rates not working properly.
Solution: Firmware Overrides can be enabled that resolve the screen refresh rates.
Press the orange button and volume up button at the OneXPlayer logo at boot.
Hold down volume down as the device powers on. You will need a USB keyboard to page through settings.