Skip to content

Collection of Max patches for use in: J1M5 Sensors & Senses & J2M6 ExD

Notifications You must be signed in to change notification settings

CMD-Breda-Avans/MAX-MSP_to_Arduino

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

27 Commits
 
 
 
 
 
 
 
 

Repository files navigation

MAX-MSP-to-Arduino

Collection of Max patches for use in module Sensors & Senses

Basic info version 2024 (baudrate is set to 115200) If you have connection problems while using multiple IO try changing arduino code IO) Sensor readout is set to 50ms

On the topside of the module you have data inlets to write to Arduino On the bottom there data outlets. Here we read from the arduino (use the ON buttons to enable individual ports)

!!!!!!!!!!!!!!!!FIRST: Upload the ArduinoSketchforMaxModule.ino sketch to your arduino IT WILL NOT WORK WITH OTHER ARDUINO CODE!!!!!!!!!

  1. Press the 'SYSTEM ON / OFF' in module. If no connection is established the menu on the right will say "no arduino connected". A good connection will show you the serial port your arduino is connected to.
  2. Enable analog and / or digtal READOUT and then individual pins (keep this OFF if you are only writing to arduino)
  3. You can switch the function of data inlets 3, 5, 6, 9 & 10 on the topside of the module to be digital, analog or servo mode (default = digital. (Note: you can connect multiple servo motors but HAVE TO USE A EXTERNAL POWERSOURCE

About

Collection of Max patches for use in: J1M5 Sensors & Senses & J2M6 ExD

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published