.muttrc

##########
# Setting #
###########

set mbox_type="Maildir"
# set mbox="~/.mail/work"
set folder="~/Mail"
set mask="!^\\.[^.]"
set spoolfile="/var/spool/mail/justinlilly"

set xterm_set_titles="yes"
#set xterm_title="Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?"
set xterm_title="Mutt%?b?*? %f"

set check_new="yes"

# set folder=imap://jlilly@mail.mse3.exchange.ms/
# This option tells mutt to use an IMAP server
# the format is: imap://[user@]server[:port]/path/to/mailbox

#set mail_check=90
# Mutt only scanes for mail in mailboxes every mail_check seconds.
# This can cause lag when fetching from IMAP (ie remote).

#set timeout=15
# This sets the maximum number of times mutt will check for mail in
# my IMAP mailbox. Default is 600 (10min) which is a bit too long.

#set edit_headers
# This option allows you to edit the header of your outgoing messages
# along with the body of your message.

set editor="vim -c 'set tw=68'"
# Thanx to Sven Guckes

set hostname=justinlilly.com
# Specifies the hostname to use after the ``@'' in local e-mail
# addresses. This overrides the compile time definition obtained from
# /etc/resolv.conf.

set use_domain=yes
# When set, Mutt will qualify all local addresses (ones without the
# @host portion) with the value of ````$hostname''''. If unset, no
# addresses will be qualified.

set beep=no
# When this variable is set, mutt will beep when an error occurs.

set duplicate_threads=yes
# This variable controls whether mutt, when sorting by threads, threads
# messages with the same message-id together. If it is set, it will
# indicate that it thinks they are duplicates of each other with an
# equals sign in the thread diagram.

# set edit_headers=yes
# This option allows you to edit the header of your outgoing messages
# along with the body of your message.

set abort_unmodified=no
# If set to yes, composition will automatically abort after editing the
# message body if no changes are made to the file (this check only happens
# after the first edit of the file). When set to no, composition will never be aborted.

set abort_nosubject=ask-yes
# If set to yes, when composing messages and no subject is given at the subject prompt,
# composition will be aborted. If set to no, composing messages with no subject given at
# the subject prompt will never be aborted.

set attribution='On %{%a, %d %b %Y}, %n wrote:\n'

set auto_tag=yes
# When set, functions in the index menu which affect a message will be applied
# to all tagged messages (if there are any). When unset, you must first use the
# tag-prefix function (default: ";") to make the next function apply to all tagged messages.

set collapse_unread=yes

set uncollapse_jump=yes
# When set, Mutt will jump to the next unread message, if any,
# when the current thread is uncollapsed.

set copy=yes
# This variable controls whether or not copies of your outgoing messages will be
# saved for later references. Also see `` $record'', `` $save_name'', `` $force_name'' and `` fcc-hook'

set followup_to=yes
# Controls whether or not the Mail-Followup-To header field is generated when sending mail.
# When set, Mutt will generate this field when you are replying to a known mailing list,
# specified with the ``subscribe'' or `` lists'' commands

set history=30
# This variable controls the size (in number of strings remembered) of the string history buffer.
# The buffer is cleared each time the variable is set.

set reverse_realname=yes
#set realname="Justin Lilly"
# This variable specifies what "real" or "personal" name should be used
# when sending messages.
# By default, this is the GCOS field from /etc/passwd. Note that this
# variable will not be used when the user has set a real name in the
# ``$from'' variable.

set reverse_name=yes
#set from=justinlilly@gmail.com
# When set, this variable contains a default from address. It can be
# overridden using my_hdr (including from send-hooks) and
# ````$reverse_name''''.
# Defaults to the EMAIL environment variable's content.


alternates "(justinlilly@google\.com)|(justinlilly@gmail\.com)"


set use_from=yes
# This is the default, but could be unset by Debian's global muttrc

# set envelope_from
# When set, mutt will try to derive the message's envelope sender from
# the "From:" header. Note that this information is passed to sendmail
# command using the "-f" command line switch, so don't set this option
# if you are using that switch in ``$sendmail'' yourself, or if the
# sendmail on your machine doesn't support that command line switch.

set include=ask-yes
# Controls whether or not a copy of the message(s) you are replying to is included in your reply.

set move=no
# Controls whether you will be asked to confirm moving read messages from your spool mailbox
# to your `` $mbox'' mailbox, or as a result of a `` mbox-hook'' command.

set pager_context=4
# This variable controls the number of lines of context that are given when displaying
# the next or previous page in the internal pager. By default, Mutt will display the
# line after the last one on the screen at the top of the next page (0 lines of context)

set pager_index_lines=10
# Determines the number of lines of a mini-index which is shown when in
# the pager. The current message, unless near the top or bottom of the
# folder, will be roughly one third of the way down this mini-index,
# giving the reader the context of a few messages before and after the
# message. This is useful, for example, to determine how many messages
# remain to be read in the current thread. One of the lines is reserved
# for the status bar from the index, so a pager_index_lines of 6 will
# only show 5 lines of the actual index. A value of 0 results in no
# index being shown. If the number of messages in the current folder is
# less than pager_index_lines, then the index will only use as many
# lines as it needs.

set pager_stop=yes
# When set, the internal-pager will not move to the next message when
# you are at the end of a message and invoke the next-page function.

set postpone=ask-yes
# Controls whether or not messages are saved in the
# '$postponed' mailbox when you elect not to send immediately

set postponed="+drafts"
#set postponed=~/Mail/postponed
# folder for postponed messages

set signature=~/Mail/signature
# Specifies the filename of your signature, which is appended to all outgoing messages.
# If the filename ends with a pipe (``|''), it is assumed that filename is a shell
# command and input should be read from its stdout.

set record="+sent"
# set record=~/Mail/mailsent
# This specifies the file into which your outgoing messages should be appended.
# (This is meant as the primary method for saving a copy of your messages, but
# another way to do this is using the `` my_hdr'' command to create a Bcc: field
# with your email address in it.)The value of $record is overridden by the
# `` $force_name'' and `` $save_name'' variables, and the `` fcc-hook'' command.

set copy=yes
# This variable controls whether or not copies of your outgoing messages will be saved for later references.
# Also see `` $record'', `` $save_name'', `` $force_name'' and `` fcc-hook''.

set mark_old=no
# Controls whether or not Mutt makes the distinction between new messages and old unread messages.
# By default, Mutt will mark new messages as old if you exit a mailbox without reading them.
# The next time you start Mutt, the messages will show up with an "O" next to them in the index menu,
# indicating that they are old.
# In order to make Mutt treat all unread messages as new only, you can unset this variable.

set reply_to=ask-yes
# If set, Mutt will ask you if you want to use the address listed in the
# Reply-To: header field when replying to a message. If you answer no,
# it will use the address in the From: header field instead. This
# option is useful for reading a mailing list that sets the Reply-To:
# header field to the list address and you want to send a private
# message to the author of a message.

set send_charset=us-ascii:iso-8859-1:iso-8859-15:utf-8
# A list of character sets for outgoing messages. Mutt will use the
# first character set into which the text can be converted exactly. If
# your ````$charset'''' is not iso-8859-1 and recipients may not
# understand UTF-8, it is advisable to include in the list an
# appropriate widely used standard character set (such as iso-8859-2,
# koi8-r or iso-2022-jp) either instead of or after "iso-8859-1".

#set sendmail="/usr/sbin/sendmail -oem -oi -f justinlilly@justinlilly.com"
#set sendmail="/usr/sbin/sendmail -oem -oi"
set sendmail="/usr/bin/msmtp"
# The -t header does some stuff that allows BCC's to work.
# http://sysmonblog.co.uk/2009/04/mutt-exim4-debian-unbuntu-and-bcc-fail-fix-included.html


# Specifies the program and arguments used to deliver mail sent by Mutt.
# Mutt expects that the specified program interprets additional
# arguments as recipient addresses.
# The same function can be found in:
# 6.3.43. envelope_from
#
# Type: boolean
# Default: no
#
# When set, mutt will try to derive the message's envelope sender from
# the "From:" header. Note that this information is passed to sendmail
# command using the "-f" command line switch, so don't set this option
# if you are using that switch in ``$sendmail'' yourself, or if the
# sendmail on your machine doesn't support that command line switch.

# Ignoring (weeding) unwanted message headers
# Usage: [un]ignore pattern [ pattern ... ]
# Messages often have many header fields added by automatic processing
# systems, or which may not seem useful to display on the screen. This
# command allows you to specify header fields which you don't normally
# want to see.
# You do not need to specify the full header field name. For example,
# ``ignore content-'' will ignore all header fields that begin with the
# pattern ``content-''.
# To remove a previously added token from the list, use the ``unignore''
# command. Note that if you do ``ignore x-'' it is not possible to
# ``unignore x-mailer,'' for example. The ``unignore'' command does not
# make Mutt display headers with the given pattern.
# ``unignore *'' will remove all tokens from the ignore list.
# From Sven's draconian header weeding

ignore *
unignore from date subject to cc
unignore organization organisation x-mailer: x-newsreader: x-mailing-list:
unignore posted-to:
unignore Message-Id
unignore Content-Type

##########
# Macros #
##########

macro index X "| spamassassin -r" "report message to Vipul's Razor"
folder-hook caughtspam push 'D.\n'
folder-hook unsubscribe push 'D.\n'
folder-hook duplicates push 'D.\n'
# If you get spammed, it is helpful to everyone else if you re-run
# spamassassin with the "-r" option to report the message in question as
# "verified spam". This will add it to Vipul's Razor
# (http://razor.sourceforge.net/), a collaborative spam filtering
# network, if you've installed the Razor modules.
# spamassassin -r < spam-message
# If you use mutt as your mail reader, this macro will bind the X key to
# report a spam message.
# macro index X "| spamassassin -r"
# This is, of course, optional -- but you'll get lots of good-netizen
# karma. ;)

macro index c "<change-folder>?<toggle-mailboxes>" "open a different folder"
macro pager c "<change-folder>?<toggle-mailboxes>" "open a different folder"

macro index C "<copy-message>?<toggle-mailboxes>" "copy a message to a mailbox"
macro index M "<save-message>?<toggle-mailboxes>" "move a message to a mailbox"

macro compose A "<attach-message>?<toggle-mailboxes>" "attach message(s) to this message"
# Helper macros to enable moving between maildir folders

set ispell = /usr/lib/mutt/mailspell
# Wrapper to call ispell on mail messages, ignoring quoted portions
# and signatures.
# By Brendan O'Dea , public domain.
# Usage: set ispell = /usr/lib/mutt/mailspell

# Ispell german and english dictionary
# macro compose I 'set ispell="/usr/bin/ispell -x -d deutsch"set ispell="/usr/bin/ispell"'

# Searching by Date
# Mutt supports two types of dates, absolute and relative.
############
# Absolute #
############
# Dates must be in DD/MM/YY format (month and year are
# optional, defaulting to the current month and year). An example of a
# valid range of dates is: Limit to messages matching: ~d 20/1/95-31/10
# If you omit the minimum (first) date, and just specify ``-DD/MM/YY'',
# all messages before the given date will be selected. If you omit the
# maximum (second) date, and specify ``DD/MM/YY-'', all messages after
# the given date will be selected. If you specify a single date with no
# dash (``-''), only messages sent on the given date will be selected.
# Error Margins. You can add error margins to absolute dates. An error
# margin is a sign (+ or -), followed by a digit, followed by one of the
# following units:
# y years
# m months
# w weeks
# d days
# As a special case, you can replace the sign by a ``*'' character,
# which is equivalent to giving identical plus and minus error margins.
# Example: To select any messages two weeks around January 15, 2001,
# you'd use the following pattern: Limit to messages matching: ~d 15/1/2001*2w
###########
#Relative #
###########
# This type of date is relative to the current date, and may
# be specified as:
# >offset (messages older than offset units)
#
# =offset (messages exactly offset units old)
# offset is specified as a positive number with one of the following
# units:
# y years
# m months
# w weeks
# d days
# Example: to select messages less than 1 month old, you would use
# Limit to messages matching: ~d <1m
#macro index q " ~d>100d"
#folder-hook mailsent 'macro index q " ~d>10d"'
#folder-hook vim 'macro index q " ~d>20d"'
#folder-hook mutt 'macro index q " ~d>300d"'
#folder-hook debian 'macro index q " ~d>300d"'
#folder-hook donnerwetter 'macro index q " ~d>3d"'
#folder-hook tagesschau 'macro index q " ~d>5d"'

##############################################
# How to enable a macro for a special folder #
##############################################
#folder-hook tin 'macro index q " ~d>1d"'

##########################################
# Start a WWW Browser on URLs (EXTERNAL) #
##########################################
# If a message contains URLs (unified ressource locator = address in the
# WWW space like http://www.mutt.org/), it is efficient to get a menu
# with all the URLs and start a WWW browser on one of them. This
# functionality is provided by the external urlview program which can be
# retrieved at ftp://ftp.guug.de/pub/mutt/contrib/ and the configuration
# commands:
macro index \cb |urlview\n
macro pager \cb |urlview\n

#########################################
# Saving attachments to folder download #
#########################################

# macro attach s /home/mutt/download/
# macro attach s /mnt/vfat/john/muttattachments/


##############
# Send Hooks #
##############
send-hook      .                              'set realname="Justin Lilly"'
#send-hook      "~f ^jlilly@justinlilly\\.com$"    'set realname="Justin Lilly"'

###########
# Binding #
###########

#bind pager previous-page
bind pager - previous-line
bind pager \eOm previous-line
bind pager + next-line
bind pager \eOk next-line
bind pager \eOM next-line
bind pager \e[1~ top
bind pager \e[4~ bottom

#bind index previous-entry
bind index - previous-entry
bind index \eOm previous-entry
bind index + next-entry
bind index \eOk next-entry
bind index \eOM display-message
bind index \e[H first-entry
bind index \e[F last-entry
bind index \e[1~ first-entry
bind index \e[4~ last-entry
#bind alias select-entry
bind alias x exit
bind attach x exit
bind browser x exit

#########
# Color #
#########

source ~/.muttrc-colors

########################
# Sorting of the mails #
########################

set sort=threads # sorting the mails in threads
set sort_aux=date # sorting the threads
# (date-received, date-sent, from, mailbox-order, size, subject, threads, to, score)
# (and everything with a prefixed "reverse-")
# (sort_aux can be prefixed with "last-" to use last element in thread instead of first one)

##############################
# Sortierung im File-Browser #
##############################

set sort_browser=alpha
# Specifies how to sort entries in the file browser. By default, the
# entries are sorted alphabetically. Valid values:
# alpha (alphabetically)
# date
# size
# unsorted
# You may optionally use the reverse- prefix to specify reverse sorting
# order (example: set sort_browser=reverse-date).

################
# Index format #
################

# Type: string
# Default: "%4C %Z %{%b %d} %-15.15L (%4l) %s"
# This variable allows you to customize the message index display to your personal taste.
# %a address of the author
# %b filename of the original message folder (think mailBox)
# %B the list to which the letter was sent, or else the folder name (%b).
# %c number of characters (bytes) in the message
# %C current message number
# %d date and time of the message in the format specified by ``date_format''
# converted to sender's time zone
# %D date and time of the message in the format specified by ``date_format''
# converted to the local time zone
# %e current message number in thread
# %E number of messages in current thread
# %f entire From: line (address + real name)
# %F author name, or recipient name if the message is from you
# %i message-id of the current message
# %l number of lines in the message
# %L list-from function
# %m total number of message in the mailbox
# %M number of hidden messages if the thread is collapsed.
# %N message score
# %n author's real name (or address if missing)
# %O (_O_riginal save folder) Where mutt would formerly have stashed the message:
# list name or recipient name if no list
# %s subject of the message
# %S status of the message (N/D/d/!/r/*)
# %t `to:' field (recipients)
# %T the appropriate character from the $to_chars string
# %u user (login) name of the author
# %v first name of the author, or the recipient if the message is from you
# %y `x-label:' field, if present
# %Y `x-label' field, if present, and (1) not at part of a thread tree, (2) at the top of a thread,
# or (3) `x-label' is different from preceding message's `x-label'.
# %Z message status flags
# %{fmt} the date and time of the message is converted to sender's time zone,
# and ``fmt'' is expanded by the library function ``strftime''; a leading bang disables locales
# %[fmt] the date and time of the message is converted to the local time zone,
# and ``fmt'' is expanded by the library function ``strftime''; a leading bang disables locales
#%(fmt) the local date and time when the message was received.
# ``fmt'' is expanded by the library function ``strftime''; a leading bang disables locales
#% the current local time. ``fmt'' is expanded by the library function ``strftime'';
# a leading bang disables locales.
#%>X right justify the rest of the string and pad with character "X"
#%|X pad to the end of the line with character "X"

###########
#Examples #
###########

#set index_format="%C %Z %-15.15t %-40.40s %e %D "
#set index_format="%4C %Z %{%b %d} %-15.15L (%4l) %s %e %?M?(#%03M)&(%4l)? %L"
#set index_format="%4C %Z %-21.21F (%3l) %s"
#set index_format="%4C %Z %{%b %D} %-15.15L (%4l) %e %E %s"
set folder_format="%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"
set index_format="%4C %-11.11D %S %-21.21n (%3l) %s"

################
# Mailinglists #
################

# lists adds a mailing list to the list of known mailing lists.
# subscribe adds a mailing list to the list of subscribed mailing lists
# and to the list of known lists.
# unlists removes a mailing list from _both_ lists.
# unsubscribe removes a mailing list from the list of subscribed

lists suse-imap-e@suse.com suse-linux-e@suse.com mutt-announce@mutt.org
lists mutt-users@mutt.org mysql@lists.mysql linux-laptop@mobilix.org
lists wine-users@winehq.com njpunklist@yahoogroups.com nwpunk@u.washington.edu
lists vim-announce@vim.org vim@vim.org wm-user@windowmaker.org
lists comp-news@dl.ac.uk procmail@Lists procmail-users@procmail.org
lists debian-user@lists.debian.org debian-news@lists.debian.org debian-laptop@lists.debian.org
lists debian-announce@lists.debian comp.mail.sendmail@lists.cm.nu
lists fetchmail-friends@lists.ccil.org procmail@informatik.rwth-aachen.de
lists news@en.tldp.org discuss@en.tldp.org announce@linuxdoc.org
lists inn-workers@isc.org tin-users@tin.org taylor-uucp@gnu.ai.mit.edu
lists leafnode-list@wpxx02.toxi.uni-wuerzburg.de alsa-user@lists.sourceforge.net
lists debian-security@lists.debian.org debian-curiosa@lists.debian.org
lists debian-testing@lists.debian.org spamassassin-talk@lists.sourceforge.net
lists sed-users@yahoogroups.com

subscribe news-announce@mutt.org mutt-users@mutt.org
subscribe suse-imap-e@suse.com suse-linux-e@suse.com
subscribe mysql@lists.mysql plasticbomb@listi.jpberlin.de

subscribe linux-laptop@mobilix.org
subscribe wine-users@winehq.com wine-announce@winehq.com
subscribe njpunklist@yahoogroups.com
subscribe nwpunk@u.washington.edu plasticbomb@listi.jpberlin.de

subscribe vim-announce@vim.org vim@vim.org wm-user@windowmaker.org wm-announce@windowmaker.org
subscribe comp-news@dl.ac.uk procmail@Lists procmail-users@procmail.org
subscribe debian-user@lists.debian.org debian-news@lists.debian.org debian-laptop@lists.debian.org
subscribe debian-announce@lists.debian.org comp.mail.sendmail@lists.cm.nu
subscribe fetchmail-friends@lists.ccil.org procmail@informatik.rwth-aachen.de
subscribe news@en.tldp.org discuss@en.tldp.org announce@linuxdoc.org

subscribe inn-workers@isc.org tin-users@tin.org taylor-uucp@gnu.ai.mit.edu
subscribe leafnode-list@wpxx02.toxi.uni-wuerzburg.de alsa-user@lists.sourceforge.net
subscribe debian-security@lists.debian.org debian-curiosa@lists.debian.org
subscribe debian-testing@lists.debian.org spamassassin-talk@lists.sourceforge.net
subscribe sed-users@yahoogroups.com

############
#Mailboxes #
############

# mailboxes [!]filename [ filename
# This command specifies folders which can receive mail and which will be checked for new messages.
# By default, the main menu status bar displays how many of these folders have new messages.
# When changing folders, pressing space will cycle through folders with new mail.
# Pressing TAB in the directory browser will bring up a menu showing the files specified by
# the mailboxes command,and indicate which contain new messages.
# mutt-announceMutt will automatically enter this mode when invoked from the command line with the -y option.

mailboxes =lists/django-devel =lists/django-users =lists/pathfinder =lists/rubynyc =lists/lispnyc
mailboxes =lists/nodejs =unimportant =. =uncategorized
mailboxes =work =work/mercurial =work/buildbot =work/jira

###########
# Aliases #
###########

# (called in ~/.muttrc to load them only once)

set alias_file=~/Mail/aliases
# Type: path. Default: "~/.muttrc". The default file in which to save aliases created
# by the `` create-alias'' function.
# Note: Mutt will not automatically source this file;
# you must explicitly use the `` source'' command for it to be executed.

#source ~/Mail/aliases
# Usage: source filename. This command allows the inclusion of initialization commands
# from other files. For example, I place all of my aliases in ~/.mail_aliases so that
# I can make my ~/.muttrc readable and keep my aliases private.
# If the filename begins with a tilde (``~''), it will be expanded to the path of your home directory.
# If the filename ends with a vertical bar (|), then filename is considered to be an
# executable program from which to read input (eg. source ~bin/myscript|/).

set sort_alias=address
# Type: sort order. Default: alias. Specifies how the entries in the `alias' menu are sorted.
# The following are legal values:
# address (sort alphabetically by email address)
# alias (sort alphabetically by alias name)
# unsorted (leave in order specified in .muttrc)

set alias_format="%4n %2d %t %-12a %r"
# Default: "%4n %t %-10a %r". Specifies the format of the data displayed for the `alias' menu.
# The following printf(3)-style sequences are available:
# %a alias name
# %n index number
# %r address which alias expands to
# %t character which indicates if the alias is tagged for inclusion

#######
# End #
#######