Skip to content

Latest commit

 

History

History
1082 lines (614 loc) · 26.7 KB

CHANGELOG.md

File metadata and controls

1082 lines (614 loc) · 26.7 KB

2.37.0

  • Speed up tile-join overzooming and make it use less memory, by not including empty child tiles in the enumeration

2.36.0

  • Make tile-join distrust the source tilesets' metadata maxzoom and minzoom
  • Add a special case in --detect-longitude-wraparound not to wrap around jumps of exactly 360°

2.35.0

  • Fix a bug in --detect-longitude-wraparound when there are multiple rings

2.34.1

  • Further improvements to tile-join speed

2.34.0

  • Improve speed of overzooming in tile-join

2.33.0

  • Further reduce memory usage of --no-simplification-of-shared-nodes by calculating the list of shared nodes globally using temporary files rather than in memory for each individual tile
  • Make --no-simplification-of-shared-nodes behave for LineStrings as it does for Polygons, preventing simplification only at crossings, convergences, and divergences, not at every point along collinear segments

2.32.1

  • Reduce memory usage of --no-simplification-of-shared-nodes for polygons

2.32.0

  • Extend --no-simplification-of-shared-nodes to also simplify shared polygon borders consistently

2.31.0

  • Fix tile-join crash when trying to join empty tilesets
  • Add --no-tiny-polygon-reduction-at-maximum-zoom option

2.30.1

  • Fix spurious reports of tiny polygons and 0-length LineStrings in "strategies"

2.30.0

  • Add --extend-zooms-if-still-dropping-maximum option
  • Add --overzoom option to tile-join

2.29.0

  • Add tippecanoe-overzoom tool

2.28.1

  • Allow --set-attribute to override an existing attribute value

2.28.0

  • Add --preserve-point-density-threshold option to reduce blank areas of the map at low zooms
  • Fix tile-join bug where use of --read-from would also accidentally enable --quiet

2.27.0

  • Do more of line simplification in integer coordinates, to make behavior consistent across platforms
  • Reduce excessive logging during pmtiles conversion
  • Add --set-attribute option
  • Accept JSON form of --accumulate-attribute

2.26.1

  • Avoid crashing if there is a polygon ring with only one point

2.26.0

  • Fix bugs in --no-simplification-of-shared-nodes
  • Updated dockerfile (jtmiclat)
  • Set build options to use C++-17 (james2432)
  • Use std::fpclassify instead of plain fpclassify (james)
  • Fix pmtiles warnings (bdon)

2.25.0

  • Add --include/-y option to tile-join

2.24.0

  • Add --cluster-maxzoom option to limit zoom levels that receive clustering
  • Add point_count_abbreviated attribute to clustered features, for consistency with supercluster
  • Makefile changes to support FreeBSD
  • Add -r option to tile-join to provide a file containing a list of input files
  • Add antimeridian_adjusted_bounds field to tileset metadata

2.23.0

  • Remove the concept of "separate metadata." Features now always directly reference their keys and values rather than going through a second level of indirection.
  • Limit the size of the string pool to 1/5 the size of memory, to prevent thrashing during feature ingestion.
  • Avoid using writeable memory maps. Instead, explicitly copy data in and out of memory.
  • Compress streams of features in the temporary files, to reduce disk usage and I/O latency

2.22.0

  • Speed up feature dropping by removing unnecessary search for other small features

2.21.0

  • Improve label placement to avoid placing labels in polygon holes

2.20.0

  • Round coordinates instead of truncating them, for better precision when overzooming

2.19.0

  • Don't guess an excessively large maxzoom when there is only one feature
  • Set the base zoom for -Bg as part of the --smallest-maximum-zoom-guess logic

2.18.0

  • Fix crash when using tile-join to join an empty pmtiles tileset

2.17.0

  • Add pmtiles output format

2.16.0

  • During tiling, limit the size of the statistics that are kept for -as-needed calculations, because they can get quite large for sources with hundreds of millions of features.

2.15.2

  • Change tile hash function to fnv1a
  • Report JSON object context on the same line as the error message

2.15.1

  • Correct mbtiles inserts to use text instead of blob
  • Add an internal data structure to represent tileset metadata

2.15.0

  • Generate label points in a more straightforward checkerboard, and fewer of them at high zoom levels.

2.14.0

  • Don't preflight each zoom level if one of the as-needed options is specified. Instead, go ahead and write out the tiles, and then clear out the zoom level for another try if necessary.

2.13.1

  • Simplify geometry earlier when the in-memory representation of a tile gets large, to reduce peak memory usage

2.13.0

  • Add --limit-tile-feature-count and --limit-tile-feature-count-at-maximum-zoom
  • Coalesce small features only onto other small features with --coalesce-smallest-as-needed, never to large features
  • Clean coalesced-as-needed features before simplifying them, to improve simplification quality

2.12.0

  • Add --drop-denser option to drop points in dense clusters in preference to those in sparse areas.

2.11.0

  • Change sqlite3 schema to deduplicate identical tiles
  • Limit guessed maxzoom to avoid spending too many tiles on polygon fill

2.10.0

  • Upgrade flatbuffers version

2.9.1

  • Do label generation after simplification, not before.

2.9.0

  • Add an option to generate label points in place of polygons
  • Add --order-smallest-first and --order-largest-first options
  • When tiny polygons are being aggregated into dust, keep the attributes of the largest.

2.8.1

  • Improve precision of polygon ring area calculations

2.8.0

  • Add the option to use a different simplification level at maxzoom

2.7.0

  • Add the option to use the Visvalingam simplification algorithm

2.6.4

  • Update tests that should have been updated in 2.6.2

2.6.3

  • Fix crash in tile-join caused by wrong-way comparison

2.6.2

  • Stop adding features to a tile if it can't possibly work, to limit memory use
  • Add --integer and --fraction options to tippecanoe-decode
  • Carry strategies field from tileset metadata through tile-join

2.6.1

  • Upgrade protozero to version 1.7.1

2.6.0

  • Add another drop rate guessing options, from the same metrics -zg uses
  • Reduce maxzooms being guessed a little:
    • Use 1.5 standard deviations, not 2, as the minimum distinguishable
    • Give overlapping polygons and linestrings more distinct indices

2.5.0

  • Add an option to add extra detail at maxzoom that does not factor into guessing
  • Restore the intended behavior that tiny polygons don't get further simplified
  • Add an option to use single-precision floating point in tiles
  • Improve polygon simplification by choosing a better start/end point
  • Sort attribute values in tiles to make them compress a little better
  • Fix dropping of "largest" points when there are duplicate points
  • Add an option to prevent guessing a basezoom higher than the maxzoom
  • Add --order-by and --order-descending options

2.4.1

  • Accept tilestats limiting options in tile-join, not just tippecanoe

2.4.0

  • Change maxzoom guessing to take into account the standard deviation of the distances between features, so data with tight clusters will choose a higher maxzoom

2.3.2

  • Add --smallest-maximum-zoom-guess to guess maxzoom starting at some minimum

2.3.1

  • Track the desired tile size (the maximum size if no features were dropped) in each zoom level too.

2.3.0

  • Drop and coalesce points too as part of smallest-as-needed dropping and coalescing
  • Keep statistics in the tileset metadata of what tile size reduction strategies were used at each zoom level

2.2.0

  • Reduce memory consumption when parsing large JSON objects
  • Don't exit with an error if free disk space can't be determined

2.1.0

  • Add barebones support for FlatGeobuf input files

2.0.0

1.36.0

  • Update Wagyu to version 0.5.0

1.35.0

  • Fix calculation of mean when accumulating attributes in clusters

1.34.6

  • Fix crash when there are null entries in the metadata table

1.34.5

  • Fix line numbers in GeoJSON feature parsing error messages

1.34.4

  • Be careful to avoid undefined behavior from shifting negative numbers

1.34.3

  • Add an option to keep intersection nodes from being simplified away

1.34.2

  • Be more consistent about when longitudes beyond 180 are allowed. Now if the entire feature is beyond 180, it will still appear.

1.34.1

  • Don't run shell filters if the current zoom is below the minzoom
  • Fix -Z and -z for tile directories in tile-join and tippecanoe-decode
  • Return a successful error status for --help and --version

1.34.0

  • Record the command line options in the tileset metadata

1.33.0

  • MultiLineStrings were previously ignored in Geobuf input

1.32.12

  • Accept .mvt as well as .pbf in directories of tiles
  • Allow tippecanoe-decode and tile-join of directories with no metadata

1.32.11

  • Don't let attribute exclusion apply to the attribute that has been specified to become the feature ID

1.32.10

  • Fix a bug that disallowed a per-feature minzoom of 0

1.32.9

  • Limit tile detail to 30 and buffer size to 127 to prevent coordinate delta overflow in vector tiles.

1.32.8

  • Better error message if the output tileset already exists

1.32.7

  • Point features may now be coalesced into MultiPoint features with --coalesce.
  • Add --hilbert option to put features in Hilbert Curve sequence

1.32.6

  • Make it an error, not a warning, to have missing coordinates for a point

1.32.5

  • Use less memory on lines and polygons that are too small for the tile
  • Fix coordinate rounding problem that was causing --grid-low-zooms grids to be lost at low zooms if the original polygons were not aligned to tile boundaries

1.32.4

  • Ignore leading zeroes when converting string attributes to feature IDs

1.32.3

  • Add an option to convert stringified number feature IDs to numbers
  • Add an option to use a specified feature attribute as the feature ID

1.32.2

  • Warn in tile-join if tilesets being joined have inconsistent maxzooms

1.32.1

  • Fix null pointer crash when reading filter output that does not tag features with their extent
  • Add --clip-bounding-box option to clip input geometry

1.32.0

  • Fix a bug that allowed coalescing of features with mismatched attributes if they had been passed through a shell prefilter

1.31.7

  • Create the output tile directory even if there are no valid features

1.31.6

  • Issue an error message in tile-join if minzoom is greater than maxzoom

1.31.5

  • Add options to change the tilestats limits

1.31.4

  • Keep tile-join from generating a tileset name longer than 255 characters

1.31.3

  • Fix the missing filename in JSON parsing warning messages

1.31.2

  • Don't accept anything inside another JSON object's properties as a feature or geometry of its own.

1.31.1

  • Add --exclude-all to tile-join

1.31.0

  • Upgrade Wagyu to version 0.4.3

1.30.6

  • Take cluster distance into account when guessing a maxzoom

1.30.4

  • Features within the z0 tile buffer of the antimeridian (not only those that cross it) are duplicated on both sides.

1.30.3

  • Add an option to automatically assign ids to features

1.30.2

  • Don't guess a higher maxzoom than is allowed for manual selection

1.30.1

  • Ensure that per-feature minzoom and maxzoom are integers
  • Report compression errors in tippecanoe-decode
  • Add the ability to specify the file format with -L{"format":"…"}
  • Add an option to treat empty CSV columns as nulls, not empty strings

1.30.0

  • Add a filter extension to allow filtering individual attributes

1.29.3

  • Include a generator field in tileset metadata with the Tippecanoe version

1.29.2

  • Be careful to remove null attributes from prefilter/postfilter output

1.29.1

  • Add --use-source-polygon-winding and --reverse-source-polygon-winding

1.29.0

  • Add the option to specify layer file, name, and description as JSON
  • Add the option to specify the description for attributes in the tileset metadata
  • In CSV input, a trailing comma now counts as a trailing empty field
  • In tippecanoe-json-tool, an empty CSV field is now an empty string, not null (for consistency with tile-join)

1.28.1

  • Explicitly check for infinite and not-a-number input coordinates

1.28.0

  • Directly support gzipped GeoJSON as input files

1.27.16

  • Fix thread safety issues related to the out-of-disk-space checker

1.27.15

  • --extend-zooms-if-still-dropping now also extends zooms if features are dropped by --force-feature-limit

1.27.14

  • Use an exit status of 100 if some zoom levels were successfully written but not all zoom levels could be tiled.

1.27.13

  • Allow filtering features by zoom level in conditional expressions
  • Lines in CSV input with empty geometry columns will be ignored

1.27.12

  • Check integrity of sqlite3 file before decoding or tile-joining

1.27.11

  • Always include tile and layer in tippecanoe-decode, fixing corrupt JSON.
  • Clean up writing of JSON in general.

1.27.10

  • Add --progress-interval setting to reduce progress indicator frequency

1.27.9

  • Make clusters look better by averaging locations of clustered points

1.27.8

  • Add --accumulate-attribute to keep attributes of dropped, coalesced, or clustered features
  • Make sure numeric command line arguments are actually numbers
  • Don't coalesce features whose non-string-pool attributes don't match

1.27.7

  • Add an option to produce only a single tile
  • Retain non-ASCII characters in layernames generated from filenames
  • Remember to close input files after reading them
  • Add --coalesce-fraction-as-needed and --coalesce-densest-as-needed
  • Report distances in both feet and meters

1.27.6

  • Fix opportunities for integer overflow and out-of-bounds references

1.27.5

  • Add --cluster-densest-as-needed to cluster features
  • Add --maximum-tile-features to set the maximum number of features in a tile

1.27.4

  • Support CSV point input
  • Don't coalesce features that have different IDs but are otherwise identical
  • Remove the 700-point limit on coalesced features, since polygon merging is no longer a performance problem

1.27.3

  • Clean up duplicated code for reading tiles from a directory

1.27.2

  • Tippecanoe-decode can decode directories of tiles, not just mbtiles
  • The --allow-existing option works on directories of tiles
  • Trim .geojson, not just .json, when making layer names from filenames

1.27.1

  • Fix a potential null pointer when parsing GeoJSON with bare geometries
  • Fix a bug that could cause the wrong features to be coalesced when input was parsed in parallel

1.27.0

  • Add tippecanoe-json-tool for sorting and joining GeoJSON files
  • Fix problem where --detect-shared-borders could simplify polygons away
  • Attach --coalesce-smallest-as-needed leftovers to the last feature, not the first
  • Fix overflow when iterating through 0-length lists backwards

1.26.7

  • Add an option to quiet the progress indicator but not warnings
  • Enable more compiler warnings and fix related problems

1.26.6

  • Be more careful about checking for overflow when parsing numbers

1.26.5

  • Support UTF-16 surrogate pairs in JSON strings
  • Support arbitrarily long lines in CSV files.
  • Treat CSV fields as numbers only if they follow JSON number syntax

1.26.4

  • Array bounds bug fix in binary to decimal conversion library

1.26.3

  • Guard against impossible coordinates when decoding tilesets

1.26.2

  • Make sure to encode tile-joined integers as ints, not doubles

1.26.1

  • Add tile-join option to rename layers

1.26.0

Fix error when parsing attributes with empty-string keys

1.25.0

  • Add --coalesce-smallest-as-needed strategy for reducing tile sizes
  • Add --stats option to tipppecanoe-decode

1.24.1

  • Limit the size and depth of the string pool for better performance

1.24.0

  • Add feature filters using the Mapbox GL Style Specification filter syntax

1.23.0

  • Add input support for Geobuf file format

1.22.2

  • Add better diagnostics for NaN or Infinity in input JSON

1.22.1

  • Fix tilestats generation when long string attribute values are elided
  • Add option not to produce tilestats
  • Add tile-join options to select zoom levels to copy

1.22.0

  • Add options to filter each tile's contents through a shell pipeline

1.21.0

  • Generate layer, feature, and attribute statistics as part of tileset metadata

1.20.1

  • Close mbtiles file properly when there are no valid features in the input

1.20.0

  • Add long options to tippecanoe-decode and tile-join. Add --quiet to tile-join.

1.19.3

  • Upgrade protozero to version 1.5.2

1.19.2

  • Ignore UTF-8 byte order mark if present

1.19.1

  • Add an option to increase maxzoom if features are still being dropped

1.19.0

  • Tile-join can merge and create directories, not only mbtiles
  • Maxzoom guessing (-zg) takes into account resolution within each feature

1.18.2

  • Fix crash with very long (>128K) attribute values

1.18.1

  • Only warn once about invalid polygons in tippecanoe-decode

1.18.0

  • Fix compression of tiles in tile-join
  • Calculate the tileset bounding box in tile-join from the tile boundaries

1.17.7

  • Enforce polygon winding and closure rules in tippecanoe-decode

1.17.6

  • Add tile-join options to set name, attribution, description

1.17.5

  • Preserve the tileset names from the source mbtiles in tile-join

1.17.4

  • Fix RFC 8142 support: Don't try to split all memory mapped files

1.17.3

  • Support RFC 8142 GeoJSON text sequences

1.17.2

  • Organize usage output the same way as in the README

1.17.1

  • Add -T option to coerce the types of feature attributes

1.17.0

  • Add -zg option to guess an appropriate maxzoom

1.16.17

  • Clean up JSON parsing at the end of each FeatureCollection to avoid running out of memory

1.16.16

  • Add tile-join options to include or exclude specific layers

1.16.15

  • Add --output-to-directory and --no-tile-compression options

1.16.14

  • Add --description option for mbtiles metadata
  • Clean up some utility functions

1.16.13

  • Add --detect-longitude-wraparound option

1.16.12

  • Stop processing higher zooms when a feature reaches its explicit maxzoom tag

1.16.11

  • Remove polygon splitting, since polygon cleaning is now fast enough

1.16.10

  • Add a tippecanoe-decode option to specify layer names

1.16.9

  • Clean up layer name handling to fix layer merging crash

1.16.8

  • Fix some code that could sometimes try to divide by zero
  • Add check for $TIPPECANOE_MAX_THREADS environmental variable

1.16.7

  • Fix area of placeholders for degenerate multipolygons

1.16.6

  • Upgrade Wagyu to 0.3.0; downgrade C++ requirement to C++ 11

1.16.5

  • Add -z and -Z options to tippecanoe-decode

1.16.4

  • Use Wagyu's quick_lr_clip() instead of a separate implementation

1.16.3

  • Upgrade Wagyu to bfbf2893

1.16.2

  • Associate attributes with the right layer when explicitly tagged

1.16.1

  • Choose a deeper starting tile than 0/0/0 if there is one that contains all the features

1.16.0

  • Switch from Clipper to Wagyu for polygon topology correction

1.15.4

  • Dot-dropping with -r/-B doesn't apply if there is a per-feature minzoom tag

1.15.3

  • Round coordinates in low-zoom grid math instead of truncating

1.15.2

  • Add --grid-low-zooms option to snap low-zoom features to the tile grid

1.15.1

  • Stop --drop-smallest-as-needed from always dropping all points

1.15.0

  • New strategies for making tiles smaller, with uniform behavior across the whole zoom level: --increase-gamma-as-needed, --drop-densest-as-needed, --drop-fraction-as-needed, --drop-smallest-as-needed.
  • Option to specify the maximum tile size in bytes
  • Option to turn off tiny polygon reduction
  • Better error checking in JSON parsing

1.14.4

  • Make -B/-r feature-dropping consistent between tiles and zoom levels

1.14.3

  • Add --detect-shared-borders option for better polygon simplification

1.14.2

  • Enforce that string feature attributes must be encoded as UTF-8

1.14.1

  • Whitespace after commas in tile-join .csv input is no longer significant

1.14.0

  • Tile-join is multithreaded and can merge multiple vector mbtiles files together

1.13.0

  • Add the ability to specify layer names within the GeoJSON input

1.12.11

  • Don't try to revive a placeholder for a degenerate polygon that had negative area

1.12.10

  • Pass feature IDs through in tile-join

1.12.9

  • Clean up parsing and serialization. Provide some context with parsing errors.

1.12.8

  • Fix the spelling of the --preserve-input-order option

1.12.7

  • Support the "id" field of GeoJSON objects and vector tile features

1.12.6

  • Fix error reports when reading from an empty file with parallel input

1.12.5

  • Add an option to vary the level of line and polygon simplification
  • Be careful not to produce an empty tile if there was a feature with empty geometry.

1.12.4

  • Be even more careful not to produce features with empty geometry

1.12.3

  • Fix double-counted progress in the progress indicator

1.12.2

  • Add ability to specify a projection to tippecanoe-decode

1.12.1

  • Fix incorrect tile layer version numbers in tile-join output

1.12.0

  • Fix a tile-join bug that would retain fields that were supposed to be excluded

1.11.9

  • Add minimal support for alternate input projections (EPSG:3857).

1.11.8

  • Add an option to calculate the density of features as a feature attribute

1.11.7

  • Keep metadata together with geometry for features that don't span many tiles, to avoid extra memory load from indexing into a separate metadata file

1.11.6

  • Reduce the size of critical data structures to reduce dynamic memory use

1.11.5

  • Let zoom level 0 have just as much extent and buffer as any other zoom
  • Fix tippecanoe-decode bug that would sometimes show outer rings as inner

1.11.4

  • Don't let polygons with nonzero area disappear during cleaning

1.11.3

  • Internal code cleanup

1.11.2

  • Update Clipper to fix potential crash

1.11.1

  • Make better use of C++ standard libraries

1.11.0

  • Convert C source files to C++

1.10.0

  • Upgrade Clipper to fix potential crashes and improve polygon topology

1.9.16

  • Switch to protozero as the library for reading and writing protocol buffers

1.9.15

  • Add option not to clip features

1.9.14

  • Clean up polygons after coalescing, if necessary

1.9.13

  • Don't trust the OS so much about how many files can be open

1.9.12

  • Limit the size of the parallel parsing streaming input buffer
  • Add an option to set the tileset's attribution

1.9.11

  • Fix a line simplification crash when a segment degenerates to a single point

1.9.10

  • Warn if temporary disk space starts to run low

1.9.9

  • Add --drop-polygons to drop a fraction of polygons by zoom level
  • Only complain once about failing to clean polygons

1.9.8

  • Use an on-disk radix sort for the index to control virtual memory thrashing when the geometry and index are too large to fit in memory

1.9.7

  • Fix build problem (wrong spelling of long long max/min constants)

1.9.6

  • Add an option to give specific layer names to specific input files

1.9.5

  • Remove temporary files that were accidentally left behind
  • Be more careful about checking memory allocations and array bounds
  • Add GNU-style long options

1.9.4

  • Tippecanoe-decode can decode .pbf files that aren't in an .mbtiles container

1.9.3

  • Don't get stuck in a loop trying to split up very small, very complicated polygons

1.9.2

  • Increase maximum tile size for tippecanoe-decode

1.9.1

  • Incorporate Mapnik's Clipper upgrades for consistent results between Mac and Linux

1.9.0

  • Claim vector tile version 2 in mbtiles
  • Split too-complex polygons into multiple features

1.8.1

  • Bug fixes to maxzoom, and more tests

1.8.0

  • There are tests that can be run with "make test".

1.7.2

  • Feature properties that are arrays or hashes get stringified rather than being left out with a warning.

1.7.1

  • Make clipping behavior with no buffer consistent with Mapnik. Features that are exactly on a tile boundary appear in both tiles.

1.7.0

  • Parallel processing of input with -P works with streamed input too
  • Error handling if unsupported options given to -p or -a

1.6.4

  • Fix crashing bug when layers are being merged with -l

1.6.3

  • Add an option to do line simplification only at zooms below maxzoom

1.6.2

  • Make sure line simplification matches on opposite sides of a tile boundary

1.6.1

  • Use multiple threads for line simplification and polygon cleaning

1.6.0

  • Add option of parallelized input when reading from a line-delimited file

1.5.1

  • Fix internal error when number of CPUs is not a power of 2
  • Add missing #include

1.5.0

  • Base zoom for dot-dropping can be specified independently of maxzoom for tiling.
  • Tippecanoe can calculate a base zoom and drop rate for you.

1.4.3

  • Encode numeric attributes as integers instead of floating point if possible

1.4.2

  • Bug fix for problem that would occasionally produce empty point geometries
  • More bug fixes for polygon generation

1.4.1

  • Features that cross the antimeridian are split into two parts instead of being partially lost off the edge

1.4.0

  • More polygon correctness
  • Query the system for the number of available CPUs instead of guessing
  • Merge input files into one layer if a layer name is specified
  • Document and install tippecanoe-enumerate and tippecanoe-decode

1.3.0

  • Tile generation is multithreaded to take advantage of multiple CPUs
  • More compact data representation reduces memory usage and improves speed
  • Polygon clipping uses Clipper and makes sure interior and exterior rings are distinguished by winding order
  • Individual GeoJSON features can specify their own minzoom and maxzoom
  • New tile-join utility can add new properties from a CSV file to an existing tileset
  • Feature coalescing, line-reversing, and reordering by attribute are now options, not defaults
  • Output of decode utility is now in GeoJSON format
  • Tile generation with a minzoom spends less time on unused lower zoom levels
  • Bare geometries without a Feature wrapper are accepted
  • Default tile resolution is 4096 units at all zooms since renderers assume it

1.2.0

  • Switched to top-down rendering, yielding performance improvements
  • Add a dot-density gamma feature to thin out especially dense clusters
  • Add support for multiple layers, making it possible to include more than one GeoJSON featurecollection in a map. #29
  • Added flags that let you optionally avoid simplifying lines, restricting maximum tile sizes, and coalescing features #30
  • Added check that minimum zoom level is less than maximum zoom level
  • Added -v flag to check tippecanoe's version