spreadsheets.qmd

# Spreadsheets {#sec-import-spreadsheets}

```{r}
#| echo: false

source("_common.R")
```

## Introduction

In @sec-data-import you learned about importing data from plain text files like `.csv` and `.tsv`.
Now it's time to learn how to get data out of a spreadsheet, either an Excel spreadsheet or a Google Sheet.
This will build on much of what you've learned in @sec-data-import, but we will also discuss additional considerations and complexities when working with data from spreadsheets.

If you or your collaborators are using spreadsheets for organizing data, we strongly recommend reading the paper "Data Organization in Spreadsheets" by Karl Broman and Kara Woo: <https://doi.org/10.1080/00031305.2017.1375989>.
The best practices presented in this paper will save you much headache when you import data from a spreadsheet into R to analyze and visualize.

## Excel

Microsoft Excel is a widely used spreadsheet software program where data are organized in worksheets inside of spreadsheet files.

### Prerequisites

In this section, you'll learn how to load data from Excel spreadsheets in R with the **readxl** package.
This package is non-core tidyverse, so you need to load it explicitly, but it is installed automatically when you install the tidyverse package.
Later, we'll also use the writexl package, which allows us to create Excel spreadsheets.

```{r}
#| message: false

library(readxl)
library(tidyverse)
library(writexl)
```

### Getting started

Most of readxl's functions allow you to load Excel spreadsheets into R:

-   `read_xls()` reads Excel files with `xls` format.
-   `read_xlsx()` read Excel files with `xlsx` format.
-   `read_excel()` can read files with both `xls` and `xlsx` format. It guesses the file type based on the input.

These functions all have similar syntax just like other functions we have previously introduced for reading other types of files, e.g., `read_csv()`, `read_table()`, etc.
For the rest of the chapter we will focus on using `read_excel()`.

### Reading Excel spreadsheets {#sec-reading-spreadsheets-excel}

@fig-students-excel shows what the spreadsheet we're going to read into R looks like in Excel. This spreadsheet can be downloaded an Excel file from <https://docs.google.com/spreadsheets/d/1V1nPp1tzOuutXFLb3G9Eyxi3qxeEhnOXUzL5_BcCQ0w/>.

```{r}
#| label: fig-students-excel
#| echo: false
#| fig-width: 5
#| fig-cap: |
#|   Spreadsheet called students.xlsx in Excel.
#| fig-alt: |
#|   A look at the students spreadsheet in Excel. The spreadsheet contains 
#|   information on 6 students, their ID, full name, favourite food, meal plan, 
#|   and age.

knitr::include_graphics("screenshots/import-spreadsheets-students.png")
```

The first argument to `read_excel()` is the path to the file to read.

```{r}
students <- read_excel("data/students.xlsx")
```

`read_excel()` will read the file in as a tibble.

```{r}
students
```

We have six students in the data and five variables on each student.
However there are a few things we might want to address in this dataset:

1.  The column names are all over the place.
    You can provide column names that follow a consistent format; we recommend `snake_case` using the `col_names` argument.

    ```{r}
    #| include: false

    options(
      dplyr.print_min = 7,
      dplyr.print_max = 7
    )
    ```

    ```{r}
    read_excel(
      "data/students.xlsx",
      col_names = c("student_id", "full_name", "favourite_food", "meal_plan", "age")
    )
    ```

    ```{r}
    #| include: false

    options(
      dplyr.print_min = 6,
      dplyr.print_max = 6
    )
    ```

    Unfortunately, this didn't quite do the trick.
    We now have the variable names we want, but what was previously the header row now shows up as the first observation in the data.
    You can explicitly skip that row using the `skip` argument.

    ```{r}
    read_excel(
      "data/students.xlsx",
      col_names = c("student_id", "full_name", "favourite_food", "meal_plan", "age"),
      skip = 1
    )
    ```

2.  In the `favourite_food` column, one of the observations is `N/A`, which stands for "not available" but it's currently not recognized as an `NA` (note the contrast between this `N/A` and the age of the fourth student in the list).
    You can specify which character strings should be recognized as `NA`s with the `na` argument.
    By default, only `""` (empty string, or, in the case of reading from a spreadsheet, an empty cell or a cell with the formula `=NA()`) is recognized as an `NA`.

    ```{r}
    read_excel(
      "data/students.xlsx",
      col_names = c("student_id", "full_name", "favourite_food", "meal_plan", "age"),
      skip = 1,
      na = c("", "N/A")
    )
    ```

3.  One other remaining issue is that `age` is read in as a character variable, but it really should be numeric.
    Just like with `read_csv()` and friends for reading data from flat files, you can supply a `col_types` argument to `read_excel()` and specify the column types for the variables you read in.
    The syntax is a bit different, though.
    Your options are `"skip"`, `"guess"`, `"logical"`, `"numeric"`, `"date"`, `"text"` or `"list"`.

    ```{r}
    read_excel(
      "data/students.xlsx",
      col_names = c("student_id", "full_name", "favourite_food", "meal_plan", "age"),
      skip = 1,
      na = c("", "N/A"),
      col_types = c("numeric", "text", "text", "text", "numeric")
    )
    ```

    However, this didn't quite produce the desired result either.
    By specifying that `age` should be numeric, we have turned the one cell with the non-numeric entry (which had the value `five`) into an `NA`.
    In this case, we should read age in as `"text"` and then make the change once the data is loaded in R.

    ```{r}
    students <- read_excel(
      "data/students.xlsx",
      col_names = c("student_id", "full_name", "favourite_food", "meal_plan", "age"),
      skip = 1,
      na = c("", "N/A"),
      col_types = c("numeric", "text", "text", "text", "text")
    )

    students <- students |>
      mutate(
        age = if_else(age == "five", "5", age),
        age = parse_number(age)
      )

    students
    ```

It took us multiple steps and trial-and-error to load the data in exactly the format we want, and this is not unexpected.
Data science is an iterative process, and the process of iteration can be even more tedious when reading data in from spreadsheets compared to other plain text, rectangular data files because humans tend to input data into spreadsheets and use them not just for data storage but also for sharing and communication.

There is no way to know exactly what the data will look like until you load it and take a look at it.
Well, there is one way, actually.
You can open the file in Excel and take a peek.
If you're going to do so, we recommend making a copy of the Excel file to open and browse interactively while leaving the original data file untouched and reading into R from the untouched file.
This will ensure you don't accidentally overwrite anything in the spreadsheet while inspecting it.
You should also not be afraid of doing what we did here: load the data, take a peek, make adjustments to your code, load it again, and repeat until you're happy with the result.

### Reading worksheets

An important feature that distinguishes spreadsheets from flat files is the notion of multiple sheets, called worksheets.
@fig-penguins-islands shows an Excel spreadsheet with multiple worksheets.
The data come from the **palmerpenguins** package, and you can download this spreadsheet as an Excel file from <https://docs.google.com/spreadsheets/d/1aFu8lnD_g0yjF5O-K6SFgSEWiHPpgvFCF0NY9D6LXnY/>.
Each worksheet contains information on penguins from a different island where data were collected.

```{r}
#| label: fig-penguins-islands
#| echo: false
#| fig-cap: |
#|   Spreadsheet called penguins.xlsx in Excel containing three worksheets.
#| fig-alt: |
#|   A look at the penguins spreadsheet in Excel. The spreadsheet contains has 
#|   three worksheets: Torgersen Island, Biscoe Island, and Dream Island.

knitr::include_graphics("screenshots/import-spreadsheets-penguins-islands.png")
```

You can read a single worksheet from a spreadsheet with the `sheet` argument in `read_excel()`.
The default, which we've been relying on up until now, is the first sheet.

```{r}
read_excel("data/penguins.xlsx", sheet = "Torgersen Island")
```

Some variables that appear to contain numerical data are read in as characters due to the character string `"NA"` not being recognized as a true `NA`.

```{r}
penguins_torgersen <- read_excel("data/penguins.xlsx", sheet = "Torgersen Island", na = "NA")

penguins_torgersen
```

Alternatively, you can use `excel_sheets()` to get information on all worksheets in an Excel spreadsheet, and then read the one(s) you're interested in.

```{r}
excel_sheets("data/penguins.xlsx")
```

Once you know the names of the worksheets, you can read them in individually with `read_excel()`.

```{r}
penguins_biscoe <- read_excel("data/penguins.xlsx", sheet = "Biscoe Island", na = "NA")
penguins_dream  <- read_excel("data/penguins.xlsx", sheet = "Dream Island", na = "NA")
```

In this case the full penguins dataset is spread across three worksheets in the spreadsheet.
Each worksheet has the same number of columns but different numbers of rows.

```{r}
dim(penguins_torgersen)
dim(penguins_biscoe)
dim(penguins_dream)
```

We can put them together with `bind_rows()`.

```{r}
penguins <- bind_rows(penguins_torgersen, penguins_biscoe, penguins_dream)
penguins
```

In @sec-iteration we'll talk about ways of doing this sort of task without repetitive code.

### Reading part of a sheet

Since many use Excel spreadsheets for presentation as well as for data storage, it's quite common to find cell entries in a spreadsheet that are not part of the data you want to read into R.
@fig-deaths-excel shows such a spreadsheet: in the middle of the sheet is what looks like a data frame but there is extraneous text in cells above and below the data.

```{r}
#| label: fig-deaths-excel
#| echo: false
#| fig-cap: |
#|   Spreadsheet called deaths.xlsx in Excel.
#| fig-alt: |
#|   A look at the deaths spreadsheet in Excel. The spreadsheet has four rows 
#|   on top that contain non-data information; the text 'For the same of 
#|   consistency in the data layout, which is really a beautiful thing, I will 
#|   keep making notes up here.' is spread across cells in these top four rows. 
#|   Then, there is a data frame that includes information on deaths of 10 
#|   famous people, including their names, professions, ages, whether they have 
#|   kids or not, date of birth and death. At the bottom, there are four more 
#|   rows of non-data information; the text 'This has been really fun, but 
#|   we're signing off now!' is spread across cells in these bottom four rows.

knitr::include_graphics("screenshots/import-spreadsheets-deaths.png")
```

This spreadsheet is one of the example spreadsheets provided in the readxl package.
You can use the `readxl_example()` function to locate the spreadsheet on your system in the directory where the package is installed.
This function returns the path to the spreadsheet, which you can use in `read_excel()` as usual.

```{r}
deaths_path <- readxl_example("deaths.xlsx")
deaths <- read_excel(deaths_path)
deaths
```

The top three rows and the bottom four rows are not part of the data frame.
It's possible to eliminate these extraneous rows using the `skip` and `n_max` arguments, but we recommend using cell ranges.
In Excel, the top left cell is `A1`.
As you move across columns to the right, the cell label moves down the alphabet, i.e.
`B1`, `C1`, etc.
And as you move down a column, the number in the cell label increases, i.e.
`A2`, `A3`, etc.

Here the data we want to read in starts in cell `A5` and ends in cell `F15`.
In spreadsheet notation, this is `A5:F15`, which we supply to the `range` argument:

```{r}
read_excel(deaths_path, range = "A5:F15")
```

### Data types

In CSV files, all values are strings.
This is not particularly true to the data, but it is simple: everything is a string.

The underlying data in Excel spreadsheets is more complex.
A cell can be one of four things:

-   A boolean, like `TRUE`, `FALSE`, or `NA`.

-   A number, like "10" or "10.5".

-   A datetime, which can also include time like "11/1/21" or "11/1/21 3:00 PM".

-   A text string, like "ten".

When working with spreadsheet data, it's important to keep in mind that the underlying data can be very different than what you see in the cell.
For example, Excel has no notion of an integer.
All numbers are stored as floating points, but you can choose to display the data with a customizable number of decimal points.
Similarly, dates are actually stored as numbers, specifically the number of seconds since January 1, 1970.
You can customize how you display the date by applying formatting in Excel.
Confusingly, it's also possible to have something that looks like a number but is actually a string (e.g., type `'10` into a cell in Excel).

These differences between how the underlying data are stored vs. how they're displayed can cause surprises when the data are loaded into R.
By default readxl will guess the data type in a given column.
A recommended workflow is to let readxl guess the column types, confirm that you're happy with the guessed column types, and if not, go back and re-import specifying `col_types` as shown in @sec-reading-spreadsheets-excel.

Another challenge is when you have a column in your Excel spreadsheet that has a mix of these types, e.g., some cells are numeric, others text, others dates.
When importing the data into R readxl has to make some decisions.
In these cases you can set the type for this column to `"list"`, which will load the column as a list of length 1 vectors, where the type of each element of the vector is guessed.

::: callout-note
Sometimes data is stored in more exotic ways, like the color of the cell background, or whether or not the text is bold.
In such cases, you might find the [tidyxl package](https://nacnudus.github.io/tidyxl/) useful.
See <https://nacnudus.github.io/spreadsheet-munging-strategies/> for more on strategies for working with non-tabular data from Excel.
:::

### Writing to Excel {#sec-writing-to-excel}

Let's create a small data frame that we can then write out.
Note that `item` is a factor and `quantity` is an integer.

```{r}
bake_sale <- tibble(
  item     = factor(c("brownie", "cupcake", "cookie")),
  quantity = c(10, 5, 8)
)

bake_sale
```

You can write data back to disk as an Excel file using the `write_xlsx()` from the [writexl package](https://docs.ropensci.org/writexl/):

```{r}
#| eval: false

write_xlsx(bake_sale, path = "data/bake-sale.xlsx")
```

@fig-bake-sale-excel shows what the data looks like in Excel.
Note that column names are included and bolded.
These can be turned off by setting `col_names` and `format_headers` arguments to `FALSE`.

```{r}
#| label: fig-bake-sale-excel
#| echo: false
#| fig-width: 5
#| fig-cap: |
#|   Spreadsheet called bake_sale.xlsx in Excel.
#| fig-alt: |
#|   Bake sale data frame created earlier in Excel.

knitr::include_graphics("screenshots/import-spreadsheets-bake-sale.png")
```

Just like reading from a CSV, information on data type is lost when we read the data back in.
This makes Excel files unreliable for caching interim results as well.
For alternatives, see @sec-writing-to-a-file.

```{r}
read_excel("data/bake-sale.xlsx")
```

### Formatted output

The writexl package is a light-weight solution for writing a simple Excel spreadsheet, but if you're interested in additional features like writing to sheets within a spreadsheet and styling, you will want to use the [openxlsx package](https://ycphs.github.io/openxlsx).
We won't go into the details of using this package here, but we recommend reading <https://ycphs.github.io/openxlsx/articles/Formatting.html> for an extensive discussion on further formatting functionality for data written from R to Excel with openxlsx.

Note that this package is not part of the tidyverse so the functions and workflows may feel unfamiliar.
For example, function names are camelCase, multiple functions can't be composed in pipelines, and arguments are in a different order than they tend to be in the tidyverse.
However, this is ok.
As your R learning and usage expands outside of this book you will encounter lots of different styles used in various R packages that you might use to accomplish specific goals in R.
A good way of familiarizing yourself with the coding style used in a new package is to run the examples provided in function documentation to get a feel for the syntax and the output formats as well as reading any vignettes that might come with the package.

### Exercises

1.  In an Excel file, create the following dataset and save it as `survey.xlsx`.
    Alternatively, you can download it as an Excel file from [here](https://docs.google.com/spreadsheets/d/1yc5gL-a2OOBr8M7B3IsDNX5uR17vBHOyWZq6xSTG2G8).

    ```{r}
    #| echo: false
    #| fig-width: 4
    #| fig-alt: |
    #|   A spreadsheet with 3 columns (group, subgroup, and id) and 12 rows. 
    #|   The group column has two values: 1 (spanning 7 merged rows) and 2 
    #|   (spanning 5 merged rows). The subgroup column has four values: A 
    #|   (spanning 3 merged rows), B (spanning 4 merged rows), A (spanning 2 
    #|   merged rows), and B (spanning 3 merged rows). The id column has twelve 
    #|   values, numbers 1 through 12.

    knitr::include_graphics("screenshots/import-spreadsheets-survey.png")
    ```

    Then, read it into R, with `survey_id` as a character variable and `n_pets` as a numerical variable.

    ```{r}
    #| echo: false

    read_excel("data/survey.xlsx", na = c("", "N/A"), col_types = c("text", "text")) |>
      mutate(
        n_pets = case_when(
          n_pets == "none" ~ "0",
          n_pets == "two"  ~ "2",
          TRUE             ~ n_pets
        ),
        n_pets = as.numeric(n_pets)
      )
    ```

2.  In another Excel file, create the following dataset and save it as `roster.xlsx`.
    Alternatively, you can download it as an Excel file from [here](https://docs.google.com/spreadsheets/d/1LgZ0Bkg9d_NK8uTdP2uHXm07kAlwx8-Ictf8NocebIE).

    ```{r}
    #| echo: false
    #| fig-width: 4
    #| fig-alt: |
    #|   A spreadsheet with 3 columns (group, subgroup, and id) and 12 rows. The 
    #|   group column has two values: 1 (spanning 7 merged rows) and 2 (spanning 
    #|   5 merged rows). The subgroup column has four values: A (spanning 3 merged 
    #|   rows), B (spanning 4 merged rows), A (spanning 2 merged rows), and B 
    #|   (spanning 3 merged rows). The id column has twelve values, numbers 1 
    #|   through 12.

    knitr::include_graphics("screenshots/import-spreadsheets-roster.png")
    ```

    Then, read it into R.
    The resulting data frame should be called `roster` and should look like the following.

    ```{r}
    #| echo: false
    #| message: false

    read_excel("data/roster.xlsx") |>
      fill(group, subgroup) |>
      print(n = 12)
    ```

3.  In a new Excel file, create the following dataset and save it as `sales.xlsx`.
    Alternatively, you can download it as an Excel file from [here](https://docs.google.com/spreadsheets/d/1oCqdXUNO8JR3Pca8fHfiz_WXWxMuZAp3YiYFaKze5V0).

    ```{r}
    #| echo: false
    #| fig-alt: |
    #|   A spreadsheet with 2 columns and 13 rows. The first two rows have text 
    #|   containing information about the sheet. Row 1 says "This file contains
    #|   information on sales". Row 2 says "Data are organized by brand name, and 
    #|   for each brand, we have the ID number for the item sold, and how many are 
    #|   sold.". Then there are two empty rows, and then 9 rows of data.

    knitr::include_graphics("screenshots/import-spreadsheets-sales.png")
    ```

    a\.
    Read `sales.xlsx` in and save as `sales`.
    The data frame should look like the following, with `id` and `n` as column names and with 9 rows.

    ```{r}
    #| echo: false
    #| message: false

    read_excel("data/sales.xlsx", skip = 3, col_names = c("id", "n")) |>
      print(n = 9)
    ```

    b\.
    Modify `sales` further to get it into the following tidy format with three columns (`brand`, `id`, and `n`) and 7 rows of data.
    Note that `id` and `n` are numeric, `brand` is a character variable.

    ```{r}
    #| echo: false
    #| message: false

    read_excel("data/sales.xlsx", skip = 3, col_names = c("id", "n")) |>
      mutate(brand = if_else(str_detect(id, "Brand"), id, NA)) |>
      fill(brand) |>
      filter(n != "n") |>
      relocate(brand) |>
      mutate(
        id = as.numeric(id),
        n = as.numeric(n)
      ) |>
      print(n = 7)
    ```

4.  Recreate the `bake_sale` data frame, write it out to an Excel file using the `write.xlsx()` function from the openxlsx package.

5.  In @sec-data-import you learned about the `janitor::clean_names()` function to turn column names into snake case.
    Read the `students.xlsx` file that we introduced earlier in this section and use this function to "clean" the column names.

6.  What happens if you try to read in a file with `.xlsx` extension with `read_xls()`?

## Google Sheets

Google Sheets is another widely used spreadsheet program.
It's free and web-based.
Just like with Excel, in Google Sheets data are organized in worksheets (also called sheets) inside of spreadsheet files.

### Prerequisites

This section will also focus on spreadsheets, but this time you'll be loading data from a Google Sheet with the **googlesheets4** package.
This package is non-core tidyverse as well, you need to load it explicitly.

```{r}
library(googlesheets4)
library(tidyverse)
```

A quick note about the name of the package: googlesheets4 uses v4 of the [Sheets API v4](https://developers.google.com/sheets/api/) to provide an R interface to Google Sheets, hence the name.

### Getting started

The main function of the googlesheets4 package is `read_sheet()`, which reads a Google Sheet from a URL or a file id.
This function also goes by the name `range_read()`.

You can also create a brand new sheet with `gs4_create()` or write to an existing sheet with `sheet_write()` and friends.

In this section we'll work with the same datasets as the ones in the Excel section to highlight similarities and differences between workflows for reading data from Excel and Google Sheets.
readxl and googlesheets4 packages are both designed to mimic the functionality of the readr package, which provides the `read_csv()` function you've seen in @sec-data-import.
Therefore, many of the tasks can be accomplished with simply swapping out `read_excel()` for `read_sheet()`.
However you'll also see that Excel and Google Sheets don't behave in exactly the same way, therefore other tasks may require further updates to the function calls.

### Reading Google Sheets

@fig-students-googlesheets shows what the spreadsheet we're going to read into R looks like in Google Sheets.
This is the same dataset as in @fig-students-excel, except it's stored in a Google Sheet instead of Excel.

```{r}
#| label: fig-students-googlesheets
#| echo: false
#| fig-cap: |
#|   Google Sheet called students in a browser window.
#| fig-alt: |
#|   A look at the students spreadsheet in Google Sheets. The spreadsheet contains 
#|   information on 6 students, their ID, full name, favourite food, meal plan, 
#|   and age.

knitr::include_graphics("screenshots/import-googlesheets-students.png")
```

The first argument to `read_sheet()` is the URL of the file to read, and it returns a tibble:\
<https://docs.google.com/spreadsheets/d/1V1nPp1tzOuutXFLb3G9Eyxi3qxeEhnOXUzL5_BcCQ0w>.
These URLs are not pleasant to work with, so you'll often want to identify a sheet by its ID.

```{r}
gs4_deauth()
```

```{r}
students_sheet_id <- "1V1nPp1tzOuutXFLb3G9Eyxi3qxeEhnOXUzL5_BcCQ0w"
students <- read_sheet(students_sheet_id)
students
```

Just like we did with `read_excel()`, we can supply column names, NA strings, and column types to `read_sheet()`.

```{r}
students <- read_sheet(
  students_sheet_id,
  col_names = c("student_id", "full_name", "favourite_food", "meal_plan", "age"),
  skip = 1,
  na = c("", "N/A"),
  col_types = "dcccc"
)

students
```

Note that we defined column types a bit differently here, using short codes.
For example, "dcccc" stands for "double, character, character, character, character".

It's also possible to read individual sheets from Google Sheets as well.
Let's read the "Torgersen Island" sheet from the [penguins Google Sheet](https://pos.it/r4ds-penguins):

```{r}
penguins_sheet_id <- "1aFu8lnD_g0yjF5O-K6SFgSEWiHPpgvFCF0NY9D6LXnY"
read_sheet(penguins_sheet_id, sheet = "Torgersen Island")
```

You can obtain a list of all sheets within a Google Sheet with `sheet_names()`:

```{r}
sheet_names(penguins_sheet_id)
```

Finally, just like with `read_excel()`, we can read in a portion of a Google Sheet by defining a `range` in `read_sheet()`.
Note that we're also using the `gs4_example()` function below to locate an example Google Sheet that comes with the googlesheets4 package.

```{r}
deaths_url <- gs4_example("deaths")
deaths <- read_sheet(deaths_url, range = "A5:F15")
deaths
```

### Writing to Google Sheets

You can write from R to Google Sheets with `write_sheet()`.
The first argument is the data frame to write, and the second argument is the name (or other identifier) of the Google Sheet to write to:

```{r}
#| eval: false

write_sheet(bake_sale, ss = "bake-sale")
```

If you'd like to write your data to a specific (work)sheet inside a Google Sheet, you can specify that with the `sheet` argument as well.

```{r}
#| eval: false

write_sheet(bake_sale, ss = "bake-sale", sheet = "Sales")
```

### Authentication

While you can read from a public Google Sheet without authenticating with your Google account and with `gs4_deauth()`, reading a private sheet or writing to a sheet requires authentication so that googlesheets4 can view and manage *your* Google Sheets.

When you attempt to read in a sheet that requires authentication, googlesheets4 will direct you to a web browser with a prompt to sign in to your Google account and grant permission to operate on your behalf with Google Sheets.
However, if you want to specify a specific Google account, authentication scope, etc. you can do so with `gs4_auth()`, e.g., `gs4_auth(email = "mine@example.com")`, which will force the use of a token associated with a specific email.
For further authentication details, we recommend reading the documentation googlesheets4 auth vignette: <https://googlesheets4.tidyverse.org/articles/auth.html>.

### Exercises

1.  Read the `students` dataset from earlier in the chapter from Excel and also from Google Sheets, with no additional arguments supplied to the `read_excel()` and `read_sheet()` functions.
    Are the resulting data frames in R exactly the same?
    If not, how are they different?

2.  Read the Google Sheet titled survey from <https://pos.it/r4ds-survey>, with `survey_id` as a character variable and `n_pets` as a numerical variable.

3.  Read the Google Sheet titled roster from <https://pos.it/r4ds-roster>.
    The resulting data frame should be called `roster` and should look like the following.

    ```{r}
    #| echo: false
    #| message: false

    read_sheet("https://docs.google.com/spreadsheets/d/1LgZ0Bkg9d_NK8uTdP2uHXm07kAlwx8-Ictf8NocebIE/") |>
      fill(group, subgroup) |>
      print(n = 12)
    ```

## Summary

Microsoft Excel and Google Sheets are two of the most popular spreadsheet systems.
Being able to interact with data stored in Excel and Google Sheets files directly from R is a superpower!
In this chapter you learned how to read data into R from spreadsheets from Excel with `read_excel()` from the readxl package and from Google Sheets with `read_sheet()` from the googlesheets4 package.
These functions work very similarly to each other and have similar arguments for specifying column names, NA strings, rows to skip on top of the file you're reading in, etc.
Additionally, both functions make it possible to read a single sheet from a spreadsheet as well.

On the other hand, writing to an Excel file requires a different package and function (`writexl::write_xlsx()`) while you can write to a Google Sheet with the googlesheets4 package, with `write_sheet()`.

In the next chapter, you'll learn about a different data source and how to read data from that source into R: databases.