How to control warm water ciculation pump? #1766
Replies: 3 comments 1 reply
-
let's get the wwCircMode working first on your setup. We'll need the system info (https://emsesp.github.io/docs/Support/) and also the log (https://emsesp.github.io/docs/Troubleshooting/#changing-a-value-on-an-ems-device-doesnt-work) |
Beta Was this translation helpful? Give feedback.
-
I have an update for everyone who is struggling with the same problem. But i was able to manage the control with the switch |
Beta Was this translation helpful? Give feedback.
-
wwCirc (WW Zirkulation aktiv) should enable/disable the pump on a boiler. We need to adjust the code for your heatpump if you could share the logs. I'm glad it works with wwCircPump (WW Zirkulationspumpe vorhanden) and wwCircMode (Zirkulationspumpen-Modus) so thanks for sharing that information. Do note in the next version (3.7.0) the 'WW' has been replaced with 'DHW' |
Beta Was this translation helpful? Give feedback.
-
Hey guys,
since a couple of month we use a Buderus WLW196i and EMS-ESP Gateway (EMS-ESP Version 3.6.4) works like a charme. I can control pv surplus to activate thermal buffer, change the target temperature and everything. But there is one thing, that i cant control and that is the circulation pump.
WW Zirkulationspumpe vorhanden
is activeIf i want to change
WW Zirkulation aktiv
the value sets back to the setting before and nothing happen.If i change
WW Zirkulationspumpen-Modus
tooff
it sets to the next minimum1x 3 Min
.Is there anything i have to change to control the circulation pump by my own?
I would like to disable ciculation during the night or i nobody is at home
Thanks in advanced
Luca
Beta Was this translation helpful? Give feedback.
All reactions