pio_local.ini_example

; example custom platformio ini file for EMS-ESP

[common]
; custom build flags to use in my_build_flags
;  -DEMSESP_UART_DEBUG ; debugging UART
;  -DEMSESP_DEBUG ; enables DEBUG to the log. Will generate a lot of extra traffic on Console and Syslog
;  -DEMSESP_DEFAULT_BOARD_PROFILE=\"NODEMCU\" ; hard code the default board name
;  -DEMSESP_DEBUG_SENSOR ; additional debug for the sensors
;  -DCORE_DEBUG_LEVEL=5 ; verbose core level debugging 5=verbose, 4=debug, 3=info
;  -DEMSESP_TEST ; enable the tests. EN language only
;  -DEMSESP_DE_ONLY ; only DE translated entity names
;  -DEMSESP_EN_ONLY ; only EN translated entity names
; my_build_flags = -DEMSESP_TEST
; my_build_flags = -DEMSESP_DEBUG -DEMSESP_TEST

[platformio]
; default_envs = esp32_4M
; default_envs = esp32_16M
; default_envs = lolin_s3
; default_envs = standalone
; default_envs = debug
; default_envs = custom

[env:esp32_4M]
; if using OTA enter your details below
;  upload_protocol = espota
;  upload_flags =
;    --port=8266
;    --auth=ems-esp-neo
;  upload_port = ems-esp.local
; for USB, here are some examples:
; upload_port = /dev/ttyUSB*
; upload_port = COM5
extra_scripts =
;   pre:scripts/build_interface.py ; comment out if you don't want to re-build the WebUI each time
  scripts/rename_fw.py

[env:esp32_16M]

[env:custom]
; use for baisc ESP boards with 4MB flash
; make sure -D TASMOTA_SDK is also enabled
platform = https://github.com/tasmota/platform-espressif32/releases/download/2024.01.00/platform-espressif32.zip
; use for S3 boards:
; platform = espressif32
framework = arduino
board = esp32dev
board_build.filesystem = littlefs
board_build.f_cpu = 240000000L
board_upload.flash_size = 4MB
board_build.partitions = esp32_partition_4M.csv
board_upload.use_1200bps_touch = false
board_upload.wait_for_upload_port = true
upload_port = /dev/ttyUSB0
extra_scripts = 
	; pre:scripts/build_interface.py
	scripts/rename_fw.py
build_unflags = ${common.unbuild_flags}
build_flags = 
	${common.core_build_flags}
	${factory_settings.build_flags}
	${common.my_build_flags}
	-D ONEWIRE_CRC16=0
	-D NO_GLOBAL_ARDUINOOTA
	-D ARDUINOJSON_ENABLE_STD_STRING=1
	-D ARDUINOJSON_USE_DOUBLE=0
	; -D ARDUINOTRACE_ENABLE=1
	-D TASMOTA_SDK
	; -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_WARN
	-D EMSESP_TEST
	-D EMSESP_DEBUG
 	-D CONFIG_ETH_ENABLED
	-D CONFIG_ASYNC_TCP_STACK_SIZE=8192
	'-DEMSESP_DEFAULT_BOARD_PROFILE="Test"'

[env:lolin_s3]
upload_port = /dev/ttyUSB0
extra_scripts =
;   pre:scripts/build_interface.py ; comment out if you don't want to re-build the WebUI each time
  scripts/rename_fw.py

; pio run -e debug
; or from Visual Studio Code do PIO -> Project Tasks -> debug -> General -> Upload and Monitor
; options for debugging are: EMSESP_DEBUG EMSESP_UART_DEBUG EMSESP_DEBUG_SENSOR
[env:debug]
board = esp32dev
framework = arduino
platform = espressif32
board_build.partitions = esp32_partition_debug.csv
board_upload.flash_size = 4MB
board_build.filesystem = littlefs
upload_protocol = esptool
build_type = debug
monitor_raw = no
monitor_filters = esp32_exception_decoder
debug_tool = esp-prog
debug_init_break = tbreak setup
build_flags = ${factory_settings.build_flags} -DEMSESP_EN_ONLY -DCORE_DEBUG_LEVEL=5 -DONEWIRE_CRC16=0 -DNO_GLOBAL_ARDUINOOTA -DARDUINOJSON_ENABLE_STD_STRING=1 -DESP32=1 -DARDUINO_ARCH_ESP32=1
upload_port = /dev/ttyUSB0
extra_scripts =
  scripts/rename_fw.py
  post:scripts/app-tls-size.py