KeyError: '0.0.1' while setting up development environment
#12763
DerTimonius
started this conversation in
Documentation
Replies: 10 comments 19 replies
-
|
@DerTimonius did you do an editable or non-editable install in Step 6? Whichever you did try, can you try the other to see if it makes a difference. If not, can you post a complete |
Beta Was this translation helpful? Give feedback.
1 reply
-
|
I tried both but there was no difference. |
Beta Was this translation helpful? Give feedback.
-
|
Hrm, nothing really jumps out from that. Can you also post the full output of |
Beta Was this translation helpful? Give feedback.
1 reply
-
|
Also the package metadata that gets installed. It will be in the conda env site-packages e.g. on my mac: |
Beta Was this translation helpful? Give feedback.
-
|
Here's the output from And the Metadata:
```
Using pip 22.3.1 from C:\Users\Timon\.conda\envs\bkdev\lib\site-packages\pip (python 3.10)
Obtaining file:///C:/Users/Timon/Coding/OpenSource/bokeh
Running command pip subprocess to install build dependencies
Collecting setuptools>=64
Downloading setuptools-67.0.0-py3-none-any.whl (1.1 MB)
---------------------------------------- 1.1/1.1 MB 5.3 MB/s eta 0:00:00
Collecting setuptools-git-versioning
Using cached setuptools_git_versioning-1.13.1-py3-none-any.whl (10 kB)
Collecting colorama
Using cached colorama-0.4.6-py2.py3-none-any.whl (25 kB)
Collecting toml>=0.10.2
Using cached toml-0.10.2-py2.py3-none-any.whl (16 kB)
Collecting packaging
Using cached packaging-23.0-py3-none-any.whl (42 kB)
Installing collected packages: toml, setuptools, packaging, colorama, setuptools-git-versioning
Successfully installed colorama-0.4.6 packaging-23.0 setuptools-67.0.0 setuptools-git-versioning-1.13.1 toml-0.10.2
Installing build dependencies ... done
Running command Checking if build backend supports build_editable
Checking if build backend supports build_editable ... done
Running command Getting requirements to build editable
C:\Users\Timon\AppData\Local\Temp\pip-build-env-c4wof7kj\overlay\Lib\site-packages\setuptools\config\pyprojecttoml.py:108: _BetaConfiguration: Support for `[tool.setuptools]` in `pyproject.toml` is still *beta*.
warnings.warn(msg, _BetaConfiguration)
running egg_info
writing src\bokeh.egg-info\PKG-INFO
writing dependency_links to src\bokeh.egg-info\dependency_links.txt
writing entry points to src\bokeh.egg-info\entry_points.txt
writing requirements to src\bokeh.egg-info\requires.txt
writing top-level names to src\bokeh.egg-info\top_level.txt
reading manifest file 'src\bokeh.egg-info\SOURCES.txt'
reading manifest template 'MANIFEST.in'
adding license file 'LICENSE.txt'
writing manifest file 'src\bokeh.egg-info\SOURCES.txt'
Getting requirements to build editable ... done
Running command pip subprocess to install backend dependencies
Collecting wheel
Using cached wheel-0.38.4-py3-none-any.whl (36 kB)
Installing collected packages: wheel
Successfully installed wheel-0.38.4
Installing backend dependencies ... done
Running command Preparing editable metadata (pyproject.toml)
C:\Users\Timon\AppData\Local\Temp\pip-build-env-c4wof7kj\overlay\Lib\site-packages\setuptools\config\pyprojecttoml.py:108: _BetaConfiguration: Support for `[tool.setuptools]` in `pyproject.toml` is still *beta*.
warnings.warn(msg, _BetaConfiguration)
running dist_info
creating C:\Users\Timon\AppData\Local\Temp\pip-modern-metadata-6n5zrppi\bokeh.egg-info
writing C:\Users\Timon\AppData\Local\Temp\pip-modern-metadata-6n5zrppi\bokeh.egg-info\PKG-INFO
writing dependency_links to C:\Users\Timon\AppData\Local\Temp\pip-modern-metadata-6n5zrppi\bokeh.egg-info\dependency_links.txt
writing entry points to C:\Users\Timon\AppData\Local\Temp\pip-modern-metadata-6n5zrppi\bokeh.egg-info\entry_points.txt
writing requirements to C:\Users\Timon\AppData\Local\Temp\pip-modern-metadata-6n5zrppi\bokeh.egg-info\requires.txt
writing top-level names to C:\Users\Timon\AppData\Local\Temp\pip-modern-metadata-6n5zrppi\bokeh.egg-info\top_level.txt
writing manifest file 'C:\Users\Timon\AppData\Local\Temp\pip-modern-metadata-6n5zrppi\bokeh.egg-info\SOURCES.txt'
reading manifest file 'C:\Users\Timon\AppData\Local\Temp\pip-modern-metadata-6n5zrppi\bokeh.egg-info\SOURCES.txt'
reading manifest template 'MANIFEST.in'
adding license file 'LICENSE.txt'
writing manifest file 'C:\Users\Timon\AppData\Local\Temp\pip-modern-metadata-6n5zrppi\bokeh.egg-info\SOURCES.txt'
creating 'C:\Users\Timon\AppData\Local\Temp\pip-modern-metadata-6n5zrppi\bokeh-0.0.1.dist-info'
Preparing editable metadata (pyproject.toml) ... done
Requirement already satisfied: PyYAML>=3.10 in c:\users\timon\.conda\envs\bkdev\lib\site-packages (from bokeh==0.0.1) (6.0)
Requirement already satisfied: pandas>=1.2 in c:\users\timon\.conda\envs\bkdev\lib\site-packages (from bokeh==0.0.1) (1.5.3)
Requirement already satisfied: contourpy>=1 in c:\users\timon\.conda\envs\bkdev\lib\site-packages (from bokeh==0.0.1) (1.0.7)
Requirement already satisfied: tornado>=5.1 in c:\users\timon\.conda\envs\bkdev\lib\site-packages (from bokeh==0.0.1) (6.2)
Requirement already satisfied: numpy>=1.16 in c:\users\timon\.conda\envs\bkdev\lib\site-packages (from bokeh==0.0.1) (1.24.1)
Requirement already satisfied: packaging>=16.8 in c:\users\timon\.conda\envs\bkdev\lib\site-packages (from bokeh==0.0.1) (23.0)
Requirement already satisfied: pillow>=7.1.0 in c:\users\timon\.conda\envs\bkdev\lib\site-packages (from bokeh==0.0.1) (9.4.0)
Requirement already satisfied: xyzservices>=2021.09.1 in c:\users\timon\.conda\envs\bkdev\lib\site-packages (from bokeh==0.0.1) (2022.9.0)
Requirement already satisfied: Jinja2>=2.9 in c:\users\timon\.conda\envs\bkdev\lib\site-packages (from bokeh==0.0.1) (3.1.2)
Requirement already satisfied: MarkupSafe>=2.0 in c:\users\timon\.conda\envs\bkdev\lib\site-packages (from Jinja2>=2.9->bokeh==0.0.1) (2.1.2)
Requirement already satisfied: python-dateutil>=2.8.1 in c:\users\timon\.conda\envs\bkdev\lib\site-packages (from pandas>=1.2->bokeh==0.0.1) (2.8.2)
Requirement already satisfied: pytz>=2020.1 in c:\users\timon\.conda\envs\bkdev\lib\site-packages (from pandas>=1.2->bokeh==0.0.1) (2022.7.1)
Requirement already satisfied: six>=1.5 in c:\users\timon\.conda\envs\bkdev\lib\site-packages (from python-dateutil>=2.8.1->pandas>=1.2->bokeh==0.0.1) (1.16.0)
Building wheels for collected packages: bokeh
Running command Building editable for bokeh (pyproject.toml)
C:\Users\Timon\AppData\Local\Temp\pip-build-env-c4wof7kj\overlay\Lib\site-packages\setuptools\config\pyprojecttoml.py:108: _BetaConfiguration: Support for `[tool.setuptools]` in `pyproject.toml` is still *beta*.
warnings.warn(msg, _BetaConfiguration)
running editable_wheel
Building BokehJS... Success! Build output: Build time: 21.2 seconds Build artifact sizes: Installing BokehJS... Success! Used NEWLY BUILT BokehJS from bokehjs/build creating C:\Users\Timon\AppData\Local\Temp\pip-wheel-pbpgcvrw.tmp-p6914hmg\bokeh.egg-info Options like adding 'editable.bokeh-0.0.1.pth' |
Beta Was this translation helpful? Give feedback.
3 replies
-
|
I think the metadata has an accidental re-copy-paste of the pip install :) |
Beta Was this translation helpful? Give feedback.
-
|
Oops, you're right 🙈 pip install bokeh conda install bokeh |
Beta Was this translation helpful? Give feedback.
-
|
This is really strange, the isolated build has all the exact same versions of build dependencies I have on my laptop: Edit: also the same git version AFAICT |
Beta Was this translation helpful? Give feedback.
-
|
Output from |
Beta Was this translation helpful? Give feedback.
1 reply
-
|
(FYI GH markdown is finicky, quote blocks inside |
Beta Was this translation helpful? Give feedback.
-
|
I really think maybe this has to be a windows-specific issue with |
Beta Was this translation helpful? Give feedback.
2 replies
-
|
Thank you for your help! 🙏 |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
@DerTimonius other random thoughts:
|
Beta Was this translation helpful? Give feedback.
10 replies
-
|
That's so weird. Just to be 100% sure we are on the same page, this is what I see: but you see nothing from Also: Thank you very much for all the assistance, I know this back and forth is a bit tedious, but I think maybe we at least have a proximate cause now, which is more than before! |
Beta Was this translation helpful? Give feedback.
-
|
Does |
Beta Was this translation helpful? Give feedback.
-
|
Other things to try if that doesn't work: |
Beta Was this translation helpful? Give feedback.
-
|
I really get nothing: It's weird. And I don't know if that's an issue with the Windows version of No problem, I'm a) glad to be of help and b) want to solve the issue as well. Might not respond much longer today, getting a bit tired 😉 |
Beta Was this translation helpful? Give feedback.
-
Did not work, and I did not set up SSH yet. Will do that tomorrow! Thank you for your help so far ❤️ |
Beta Was this translation helpful? Give feedback.
-
|
I can reproduce this. It is a github workflow issue and is not Windows-specific. If you fork the bokeh repo via the github UI the default behaviour is to "Copy the No tags present. The solution is to continue github workflow to set I suspect, but haven't checked, that if you unchecked the "Copy the Existing maintainers don't experience this problem as we generally push and pull directly to |
Beta Was this translation helpful? Give feedback.
1 reply
-
|
@ianthomas23 Thank you for investigation. If I understand correctly the best way to proceed for me would be to delete the forked repo, fork it again and uncheck the "Copy the branch-3.1 branch only" checkbox, reset the dev environment and hope for the best 🙌 Or use the |
Beta Was this translation helpful? Give feedback.
-
|
@ianthomas23 @bryevdv I was able to fetch the tags now! I'll be resetting the dev environment now and get back to you when it's done! |
Beta Was this translation helpful? Give feedback.
0 replies
-
|
Thank you very much for your help and patience, it's working now!
|
Beta Was this translation helpful? Give feedback.
0 replies
-
|
closing the loop: #12768 Thanks @DerTimonius, @ianthomas23 |
Beta Was this translation helpful? Give feedback.
0 replies
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
-
Hi everyone 👋
Description of the error
I was following the excellent guide for setting up the development environment to work on issue #12752 . Things went pretty smoothly up until step 7: when running
bokeh sampledataI got the following error(there were a lot more files above that, but not of them did show more than the filenames)
I tried resetting everything, including the environment, but it didn't help. I was wondering if the
bokehcommand itself was working but sadly I got the same error.What behavior did I expect
I expected that the sampledata would download without any errors.
What systems am I using
I'm running the code described in the setup guide inside the
Anaconda PromptThe next will probably not be important but I'm leaving them here nontheless
Thank you for your help! 🙌
Beta Was this translation helpful? Give feedback.
All reactions