Domotixz IDX funktioniert mit 14-0-0 nicht mehr

[mafrei2019]

PROBLEM DESCRIPTION

A clear and concise description of what the problem is.

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Device used (e.g., Sonoff Basic): _____
• Tasmota binary firmware version number used: _____
  • Pre-compiled
  • Self-compiled
• Flashing tools used: _____
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

• Provide the output of this command: Status 0:

  STATUS 0 output here:

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:

TO REPRODUCE

Steps to reproduce the behavior:

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

[arendst]

DzIdx works great:

11:22:24.072 SRC: MQTT
11:22:24.073 CMD: Grp 0, Cmd 'POWER', Idx 1, Len 299, Pld 1, Data '1'
11:22:24.121 MQT: stat/powr320d3/RESULT = {"POWER":"ON"}
11:22:24.123 MQT: stat/powr320d3/POWER = ON
11:22:25.362 CFG: Saved, Count 1286, Bytes 4096
11:22:32.872 CSE: Overload
11:22:37.224 CMD: dzidx
11:22:37.225 SRC: WebConsole from 192.168.2.1
11:22:37.226 CMD: Grp 0, Cmd 'DZIDX', Idx 1, Len 0, Pld -99, Data ''
11:22:37.231 MQT: stat/powr320d3/RESULT = {"DzIdx1":403}
11:22:50.833 CMD: dzidx0 0
11:22:50.834 SRC: WebConsole from 192.168.2.1
11:22:50.835 CMD: Grp 0, Cmd 'DZIDX', Idx 0, Len 1, Pld 0, Data '0'
11:22:50.837 MQT: Unsubscribe from domoticz/out/#
11:22:50.845 MQT: stat/powr320d3/RESULT = {"DzIdx0":0}
11:22:51.089 CFG: Saved, Count 1287, Bytes 4096
11:22:58.600 CMD: dzidx
11:22:58.601 SRC: WebConsole from 192.168.2.1
11:22:58.603 CMD: Grp 0, Cmd 'DZIDX', Idx 1, Len 0, Pld -99, Data ''
11:22:58.608 MQT: stat/powr320d3/RESULT = {"DzIdx1":0}
11:23:08.808 CMD: dzidx1 403
11:23:08.809 SRC: WebConsole from 192.168.2.1
11:23:08.810 CMD: Grp 0, Cmd 'DZIDX', Idx 1, Len 3, Pld 403, Data '403'
11:23:08.813 MQT: Subscribe to domoticz/out/#
11:23:08.820 MQT: stat/powr320d3/RESULT = {"DzIdx1":403}
11:23:09.019 CFG: Saved, Count 1288, Bytes 4096

If you encounter issues then fill in the requested information from the initial issue and we might find out more....

[mafrei2019]

Ich habe es nochmal probiert. Schalte in in Domo eine Gerät welches als Info nur die IDX (mqtt) eingetragen hat, funktioniert es bein14-0-0 nicht aber bei 13-4-0 ohne Probleme. Somit funktionieren auch alle meine Blockly nicht mehr.