contrail-vrouter-agent.conf

#
# Vnswad configuration options
#

[CONTROL-NODE]
# IP address to be used to connect to control-node. Maximum of 2 IP addresses
# (separated by a space) can be provided. If no IP is configured then the
# value provided by discovery service will be used. (optional)
# server=10.0.0.1 10.0.0.2

[DEFAULT]
# Everything in this section is optional

# IP address and port to be used to connect to collector. If these are not
# configured, value provided by discovery service will be used. Multiple
# IP:port strings separated by space can be provided
# collectors=127.0.0.1:8086

# Agent mode : can be vrouter / tsn / tor (default is vrouter)
# agent_mode=

# Aging time for flow-records in seconds
# flow_cache_timeout=0

# hostname= # Retrieved from gethostname() or `hostname -s` equivalent

# Http server port for inspecting vnswad state (useful for debugging)
# http_server_port=8085

# Category for logging. Default value is '*'
# log_category=

# Number of tx-buffers on pkt0 interface
# pkt0_tx_buffers=1000
#
# Measure delays in different queues
# measure_queue_delay=0
#
# Local log file name
log_file=/var/log/contrail/contrail-vrouter-agent.log

# Log severity levels. Possible values are SYS_EMERG, SYS_ALERT, SYS_CRIT,
# SYS_ERR, SYS_WARN, SYS_NOTICE, SYS_INFO and SYS_DEBUG. Default is SYS_DEBUG
log_level=SYS_NOTICE

# Enable/Disable local file logging. Possible values are 0 (disable) and 1 (enable)
log_local=1

# Enable/Disable local flow message logging. Possible values are 0 (disable) and 1 (enable)
# log_flow=0

# Encapsulation type for tunnel. Possible values are MPLSoGRE, MPLSoUDP, VXLAN
# tunnel_type=

# Enable/Disable headless mode for agent. In headless mode agent retains last
# known good configuration from control node when all control nodes are lost.
# Possible values are true(enable) and false(disable)
# headless_mode=

# DHCP relay mode (true or false) to determine if a DHCP request in fabric
# interface with an unconfigured IP should be relayed or not
# dhcp_relay_mode=

# Sandesh send rate limit can be used to throttle system logs transmitted per
# second. System logs are dropped if the sending rate is exceeded
# sandesh_send_rate_limit=100

# Enable/Disable SSL based XMPP Authentication
# xmpp_auth_enable=false
# xmpp_dns_auth_enable=false
# xmpp_server_cert=/etc/contrail/ssl/certs/server.pem
# xmpp_server_key=/etc/contrail/ssl/private/server-privkey.pem
# xmpp_ca_cert=/etc/contrail/ssl/certs/ca-cert.pem

# Gateway mode : can be server/ vcpe (default is none)
# gateway_mode=

[DISCOVERY]
#If DEFAULT.collectors and/or CONTROL-NODE and/or DNS is not specified this
#section is mandatory. Else this section is optional

# IP address and port of discovery server
# port=5998
# server=127.0.0.1

# Number of control-nodes info to be provided by Discovery service. Possible
# values are 1 and 2
# max_control_nodes=1

[DNS]
# IP address to be used to connect to dns-node. Maximum of 2 IP addresses
# (separated by a space) can be provided. If no IP is configured then the
# value provided by discovery service will be used. (Optional)
# server=10.0.0.1 10.0.0.2

# Client port used by vrouter-agent while connecting to contrail-named
# dns_client_port=

[HYPERVISOR]
# Everything in this section is optional

# Hypervisor type. Possible values are kvm, xen and vmware
# type=kvm

# Link-local IP address and prefix in ip/prefix_len format (for xen)
# xen_ll_ip=

# Link-local interface name when hypervisor type is Xen
# xen_ll_interface=

# Physical interface name when hypervisor type is vmware
# vmware_physical_interface=

# Mode of operation for VMWare. Possible values esxi_neutron, vcenter
# default is esxi_neutron
# vmware_mode=

[FLOWS]
# Everything in this section is optional

# Number of threads for flow setup
# thread_count = 4
#
# Maximum flows allowed per VM (given as % of maximum system flows)
# max_vm_flows=

# Maximum number of link-local flows allowed across all VMs
# max_system_linklocal_flows=4096

# Maximum number of link-local flows allowed per VM
# max_vm_linklocal_flows=1024

# Number of Index state-machine events to log
# index_sm_log_count=0

# Enable/Disable tracing of flow messages. Introspect can over-ride this value
# trace_enable=false
#
# Number of add-tokens
# add_tokens=100
# Number of ksync-tokens
# add_tokens=50
# Number of del-tokens
# del_tokens=50
# Number of update-tokens
# update_tokens=50
[METADATA]
# Shared secret for metadata proxy service (Optional)
# metadata_proxy_secret=contrail

# Metadata proxy port on which agent listens (Optional)
# metadata_proxy_port=

[NETWORKS]
# control-channel IP address used by WEB-UI to connect to vnswad to fetch
# required information (Optional)
# control_network_ip=

[VIRTUAL-HOST-INTERFACE]
# Everything in this section is mandatory

# name of virtual host interface
# name=vhost0

# IP address and prefix in ip/prefix_len format
# ip=10.1.1.1/24

# Gateway IP address for virtual host
# gateway=10.1.1.254

# Flag to indicate if hosts in vhost subnet can be resolved by ARP
# If set to 1 host in subnet would be resolved by ARP, if set to 0
# all the traffic destined to hosts within subnet also go via
# default gateway
# subnet_hosts_resolvable=0

# Physical interface name to which virtual host interface maps to
# physical_interface=vnet0

# List of IP addresses assigned for the compute node other than vhost. Specify
# this only if vhost interface is un-numbered in host-os. Agent will use one
# of the compute_node_address to run services that need IP Address in host-os
# (like metadata...)
#compute_node_address = 10.204.216.28

# We can have multiple gateway sections with different indices in the
# following format
[GATEWAY-0]
# Name of the routing_instance for which the gateway is being configured
# routing_instance=default-domain:admin:public:public

# Gateway interface name
# interface=vgw

# Virtual network ip blocks for which gateway service is required. Each IP
# block is represented as ip/prefix. Multiple IP blocks are represented by
# separating each with a space
# ip_blocks=1.1.1.1/24

[GATEWAY-1]
# Name of the routing_instance for which the gateway is being configured
# routing_instance=default-domain:admin:public1:public1

# Gateway interface name
# interface=vgw1

# Virtual network ip blocks for which gateway service is required. Each IP
# block is represented as ip/prefix. Multiple IP blocks are represented by
# separating each with a space
# ip_blocks=2.2.1.0/24 2.2.2.0/24

# Routes to be exported in routing_instance. Each route is represented as
# ip/prefix. Multiple routes are represented by separating each with a space
# routes=10.10.10.1/24 11.11.11.1/24

[SERVICE-INSTANCE]
# Path to the script which handles the netns commands
netns_command=/usr/bin/opencontrail-vrouter-netns
docker_command=/usr/bin/opencontrail-vrouter-docker

# Number of workers that will be used to start netns commands
#netns_workers=1

# Timeout for each netns command, when the timeout is reached, the netns
# command is killed.
#netns_timeout=30
#
[TASK]
# Number of threads used by TBB
# thread_count = 8
# Log message if time taken to execute task exceeds a threshold (in msec)
# log_exec_threshold = 10
#
# Log message if time taken to schedule task exceeds a threshold (in msec)
# log_schedule_threshold = 25
#
# TBB Keepawake timer interval
# tbb_keepawake_timeout = 20

[SERVICES]
# bgp_as_a_service_port_range - reserving set of ports to be used.
# bgp_as_a_service_port_range=30000-35000

[QOS]
# Default logical queue
# logical_queue=

# [QUEUE-1]
# Nic queues for qos config
# logical_queue=

# Nic queue scheduling algorithm used
# scheduling=

# Percentage of the total bandwidth used by queue
# bandwidth=

# [QUEUE-2]
# Nic queues for qos config
# logical_queue=

# Nic queue scheduling algorithm used
# scheduling=

# Percentage of the total bandwidth used by queue
# bandwidth=

# [QUEUE-3]
# Nic queues for qos config
# logical_queue=

# Nic queue scheduling algorithm used
# scheduling=

# Percentage of the total bandwidth used by queue
# bandwidth=