You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Hi there,
I'm using Jetson AGX Orin with Jetpack 5.1.1, and 5.1.2
I purchased the SKU:B0473 from arducam, and installed the driver in release.
I installed the driver using command "./install_full -m imx477".
Here, the driver isn't detected, but seldomly when I check the booting message with "sudo dmesg | grep -E "imx477|imx219|arducam".
(I can only see "arducam").
Additionally, sometimes the driver is detected, but still it doesn't detect the camera, which means "ls /dev/video*" cannot find anything.
Since I connected the camera and the board I received from Arducam, I think it has to works. (I followed the quick start guide, and checked the troubleshoot)
Quickstart: https://docs.arducam.com/Nvidia-Jetson-Camera/Nvidia-Jetson-Orin-Series/NVIDIA-Jetson-AGX-Orin/Quick-Start-Guide/
Troubleshoot: https://docs.arducam.com/Nvidia-Jetson-Camera/Native-Camera/Toubleshoot/
Could you check the driver deb file if it has any problem or not?
Thank you in advance.
The text was updated successfully, but these errors were encountered:
Hi there,
I'm using Jetson AGX Orin with Jetpack 5.1.1, and 5.1.2
I purchased the SKU:B0473 from arducam, and installed the driver in release.
I installed the driver using command "./install_full -m imx477".
Here, the driver isn't detected, but seldomly when I check the booting message with "sudo dmesg | grep -E "imx477|imx219|arducam".
(I can only see "arducam").
Additionally, sometimes the driver is detected, but still it doesn't detect the camera, which means "ls /dev/video*" cannot find anything.
Since I connected the camera and the board I received from Arducam, I think it has to works. (I followed the quick start guide, and checked the troubleshoot)
Quickstart: https://docs.arducam.com/Nvidia-Jetson-Camera/Nvidia-Jetson-Orin-Series/NVIDIA-Jetson-AGX-Orin/Quick-Start-Guide/
Troubleshoot: https://docs.arducam.com/Nvidia-Jetson-Camera/Native-Camera/Toubleshoot/
Could you check the driver deb file if it has any problem or not?
Thank you in advance.
The text was updated successfully, but these errors were encountered: