New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Cannot open camera.rtn_val = 65361 #186

Open

SSanghunLEE opened this issue Sep 7, 2022 · 0 comments

SSanghunLEE commented Sep 7, 2022 •

edited

I want to get 108MP image in Jetson nano Ubuntu 18.04 version.

I followed the install steps to run camera Arducam 108MP using USB 3.0 Camera shield UC-593 Rev.C

Install arducam_config_parser
Download and install the latest libusb
Install the SDK

There is no problem with the connection of my hardware equipment.
I checked the camera and usb shield through USBTest.exe in Windows 11 and loaded the image successfully.
I got a 12MP image of 4000x3000 using the method mentioned above.
Immediately, ['ArduCAM_108MP_MIPI_2Lane_RAW8_12000x9000_1.4fps.cfg'] was used to obtain an image of 108MP and the following results were obtained.
(https://github.com/ArduCAM/ArduCAM_USB_Camera_Shield/blob/master/Config/USB3.0_UC-593%20Rev.C/MIPI/ArduCAM_108MP/ArduCAM_108MP_MIPI_2Lane_RAW8_12000x9000_1.4fps.cfg)

('color mode' , 0)
('open fail,rtn_val = ', 65361)

Does anyone know what kind of error this is and what is the solution?

The text was updated successfully, but these errors were encountered:

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment