forked from flashrom/flashrom
/
dediprog.c
1320 lines (1185 loc) · 37.9 KB
/
dediprog.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
/*
* This file is part of the flashrom project.
*
* Copyright (C) 2010 Carl-Daniel Hailfinger
* Copyright (C) 2015 Simon Glass
* Copyright (C) 2015 Stefan Tauner
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <sys/types.h>
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <limits.h>
#include <errno.h>
#include <libusb.h>
#include "flash.h"
#include "chipdrivers.h"
#include "programmer.h"
#include "spi.h"
/* LIBUSB_CALL ensures the right calling conventions on libusb callbacks.
* However, the macro is not defined everywhere. m(
*/
#ifndef LIBUSB_CALL
#define LIBUSB_CALL
#endif
#define FIRMWARE_VERSION(x,y,z) ((x << 16) | (y << 8) | z)
#define DEFAULT_TIMEOUT 3000
#define DEDIPROG_ASYNC_TRANSFERS 8 /* at most 8 asynchronous transfers */
#define REQTYPE_OTHER_OUT (LIBUSB_ENDPOINT_OUT | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_OTHER) /* 0x43 */
#define REQTYPE_OTHER_IN (LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_OTHER) /* 0xC3 */
#define REQTYPE_EP_OUT (LIBUSB_ENDPOINT_OUT | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_ENDPOINT) /* 0x42 */
#define REQTYPE_EP_IN (LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_ENDPOINT) /* 0xC2 */
enum dediprog_devtype {
DEV_UNKNOWN = 0,
DEV_SF100 = 100,
DEV_SF200 = 200,
DEV_SF600 = 600,
};
enum dediprog_leds {
LED_INVALID = -1,
LED_NONE = 0,
LED_PASS = 1 << 0,
LED_BUSY = 1 << 1,
LED_ERROR = 1 << 2,
LED_ALL = 7,
};
/* IO bits for CMD_SET_IO_LED message */
enum dediprog_ios {
IO1 = 1 << 0,
IO2 = 1 << 1,
IO3 = 1 << 2,
IO4 = 1 << 3,
};
enum dediprog_cmds {
CMD_TRANSCEIVE = 0x01,
CMD_POLL_STATUS_REG = 0x02,
CMD_SET_VPP = 0x03,
CMD_SET_TARGET = 0x04,
CMD_READ_EEPROM = 0x05,
CMD_WRITE_EEPROM = 0x06,
CMD_SET_IO_LED = 0x07,
CMD_READ_PROG_INFO = 0x08,
CMD_SET_VCC = 0x09,
CMD_SET_STANDALONE = 0x0A,
CMD_SET_VOLTAGE = 0x0B, /* Only in firmware older than 6.0.0 */
CMD_GET_BUTTON = 0x11,
CMD_GET_UID = 0x12,
CMD_SET_CS = 0x14,
CMD_IO_MODE = 0x15,
CMD_FW_UPDATE = 0x1A,
CMD_FPGA_UPDATE = 0x1B,
CMD_READ_FPGA_VERSION = 0x1C,
CMD_SET_HOLD = 0x1D,
CMD_READ = 0x20,
CMD_WRITE = 0x30,
CMD_WRITE_AT45DB = 0x31,
CMD_NAND_WRITE = 0x32,
CMD_NAND_READ = 0x33,
CMD_SET_SPI_CLK = 0x61,
CMD_CHECK_SOCKET = 0x62,
CMD_DOWNLOAD_PRJ = 0x63,
CMD_READ_PRJ_NAME = 0x64,
// New protocol/firmware only
CMD_CHECK_SDCARD = 0x65,
CMD_READ_PRJ = 0x66,
};
enum dediprog_target {
FLASH_TYPE_APPLICATION_FLASH_1 = 0,
FLASH_TYPE_FLASH_CARD,
FLASH_TYPE_APPLICATION_FLASH_2,
FLASH_TYPE_SOCKET,
};
enum dediprog_readmode {
READ_MODE_STD = 1,
READ_MODE_FAST = 2,
READ_MODE_ATMEL45 = 3,
READ_MODE_4B_ADDR_FAST = 4,
READ_MODE_4B_ADDR_FAST_0x0C = 5, /* New protocol only */
};
enum dediprog_writemode {
WRITE_MODE_PAGE_PGM = 1,
WRITE_MODE_PAGE_WRITE = 2,
WRITE_MODE_1B_AAI = 3,
WRITE_MODE_2B_AAI = 4,
WRITE_MODE_128B_PAGE = 5,
WRITE_MODE_PAGE_AT26DF041 = 6,
WRITE_MODE_SILICON_BLUE_FPGA = 7,
WRITE_MODE_64B_PAGE_NUMONYX_PCM = 8, /* unit of 512 bytes */
WRITE_MODE_4B_ADDR_256B_PAGE_PGM = 9,
WRITE_MODE_32B_PAGE_PGM_MXIC_512K = 10, /* unit of 512 bytes */
WRITE_MODE_4B_ADDR_256B_PAGE_PGM_0x12 = 11,
WRITE_MODE_4B_ADDR_256B_PAGE_PGM_FLAGS = 12,
};
enum dediprog_standalone_mode {
ENTER_STANDALONE_MODE = 0,
LEAVE_STANDALONE_MODE = 1,
};
/*
* These are not official designations; they are for use in flashrom only.
* Order must be preserved so that comparison operators work.
*/
enum protocol {
PROTOCOL_UNKNOWN,
PROTOCOL_V1,
PROTOCOL_V2,
PROTOCOL_V3,
};
static const struct dev_entry devs_dediprog[] = {
{0x0483, 0xDADA, OK, "Dediprog", "SF100/SF200/SF600"},
{0},
};
struct dediprog_data {
struct libusb_context *usb_ctx;
libusb_device_handle *handle;
int in_endpoint;
int out_endpoint;
int firmwareversion;
enum dediprog_devtype devicetype;
};
#if defined(LIBUSB_MAJOR) && defined(LIBUSB_MINOR) && defined(LIBUSB_MICRO) && \
LIBUSB_MAJOR <= 1 && LIBUSB_MINOR == 0 && LIBUSB_MICRO < 9
/* Quick and dirty replacement for missing libusb_error_name in libusb < 1.0.9 */
const char * LIBUSB_CALL libusb_error_name(int error_code)
{
if (error_code >= INT16_MIN && error_code <= INT16_MAX) {
/* 18 chars for text, rest for number (16 b should be enough), sign, nullbyte. */
static char my_libusb_error[18 + 5 + 2];
sprintf(my_libusb_error, "libusb error code %i", error_code);
return my_libusb_error;
} else {
return "UNKNOWN";
}
}
#endif
static enum protocol protocol(const struct dediprog_data *dp_data)
{
/* Firmware version < 5.0.0 is handled explicitly in some cases. */
switch (dp_data->devicetype) {
case DEV_SF100:
case DEV_SF200:
if (dp_data->firmwareversion < FIRMWARE_VERSION(5, 5, 0))
return PROTOCOL_V1;
else
return PROTOCOL_V2;
case DEV_SF600:
if (dp_data->firmwareversion < FIRMWARE_VERSION(6, 9, 0))
return PROTOCOL_V1;
else if (dp_data->firmwareversion <= FIRMWARE_VERSION(7, 2, 21))
return PROTOCOL_V2;
else
return PROTOCOL_V3;
default:
return PROTOCOL_UNKNOWN;
}
}
struct dediprog_transfer_status {
int error; /* OK if 0, ERROR else */
unsigned int queued_idx;
unsigned int finished_idx;
};
static void LIBUSB_CALL dediprog_bulk_read_cb(struct libusb_transfer *const transfer)
{
struct dediprog_transfer_status *const status = (struct dediprog_transfer_status *)transfer->user_data;
if (transfer->status != LIBUSB_TRANSFER_COMPLETED) {
status->error = 1;
msg_perr("SPI bulk read failed!\n");
}
++status->finished_idx;
}
static int dediprog_bulk_read_poll(struct libusb_context *usb_ctx,
const struct dediprog_transfer_status *const status,
const int finish)
{
if (status->finished_idx >= status->queued_idx)
return 0;
do {
struct timeval timeout = { 10, 0 };
const int ret = libusb_handle_events_timeout(usb_ctx, &timeout);
if (ret < 0) {
msg_perr("Polling read events failed: %i %s!\n", ret, libusb_error_name(ret));
return 1;
}
} while (finish && (status->finished_idx < status->queued_idx));
return 0;
}
static int dediprog_read(libusb_device_handle *dediprog_handle,
enum dediprog_cmds cmd, unsigned int value, unsigned int idx,
uint8_t *bytes, size_t size)
{
return libusb_control_transfer(dediprog_handle, REQTYPE_EP_IN, cmd, value, idx,
(unsigned char *)bytes, size, DEFAULT_TIMEOUT);
}
static int dediprog_write(libusb_device_handle *dediprog_handle,
enum dediprog_cmds cmd, unsigned int value, unsigned int idx,
const uint8_t *bytes, size_t size)
{
return libusb_control_transfer(dediprog_handle, REQTYPE_EP_OUT, cmd, value, idx,
(unsigned char *)bytes, size, DEFAULT_TIMEOUT);
}
/* This function sets the GPIOs connected to the LEDs as well as IO1-IO4. */
static int dediprog_set_leds(int leds, const struct dediprog_data *dp_data)
{
if (leds < LED_NONE || leds > LED_ALL)
leds = LED_ALL;
/* Older Dediprogs with 2.x.x and 3.x.x firmware only had two LEDs, assigned to different bits. So map
* them around if we have an old device. On those devices the LEDs map as follows:
* bit 2 == 0: green light is on.
* bit 0 == 0: red light is on.
*
* Additionally, the command structure has changed with the "new" protocol.
*
* FIXME: take IO pins into account
*/
int target_leds, ret;
if (protocol(dp_data) >= PROTOCOL_V2) {
target_leds = (leds ^ 7) << 8;
ret = dediprog_write(dp_data->handle, CMD_SET_IO_LED, target_leds, 0, NULL, 0);
} else {
if (dp_data->firmwareversion < FIRMWARE_VERSION(5, 0, 0)) {
target_leds = ((leds & LED_ERROR) >> 2) | ((leds & LED_PASS) << 2);
} else {
target_leds = leds;
}
target_leds ^= 7;
ret = dediprog_write(dp_data->handle, CMD_SET_IO_LED, 0x9, target_leds, NULL, 0);
}
if (ret != 0x0) {
msg_perr("Command Set LED 0x%x failed (%s)!\n", leds, libusb_error_name(ret));
return 1;
}
return 0;
}
static int dediprog_set_spi_voltage(libusb_device_handle *dediprog_handle, int millivolt)
{
int ret;
uint16_t voltage_selector;
switch (millivolt) {
case 0:
/* Admittedly this one is an assumption. */
voltage_selector = 0x0;
break;
case 1800:
voltage_selector = 0x12;
break;
case 2500:
voltage_selector = 0x11;
break;
case 3500:
voltage_selector = 0x10;
break;
default:
msg_perr("Unknown voltage %i mV! Aborting.\n", millivolt);
return 1;
}
msg_pdbg("Setting SPI voltage to %u.%03u V\n", millivolt / 1000,
millivolt % 1000);
if (voltage_selector == 0) {
/* Wait some time as the original driver does. */
default_delay(200 * 1000);
}
ret = dediprog_write(dediprog_handle, CMD_SET_VCC, voltage_selector, 0, NULL, 0);
if (ret != 0x0) {
msg_perr("Command Set SPI Voltage 0x%x failed!\n",
voltage_selector);
return 1;
}
if (voltage_selector != 0) {
/* Wait some time as the original driver does. */
default_delay(200 * 1000);
}
return 0;
}
struct dediprog_spispeeds {
const char *const name;
const int speed;
};
static const struct dediprog_spispeeds spispeeds[] = {
{ "24M", 0x0 },
{ "12M", 0x2 },
{ "8M", 0x1 },
{ "3M", 0x3 },
{ "2.18M", 0x4 },
{ "1.5M", 0x5 },
{ "750k", 0x6 },
{ "375k", 0x7 },
{ NULL, 0x0 },
};
static int dediprog_set_spi_speed(unsigned int spispeed_idx, const struct dediprog_data *dp_data)
{
if (dp_data->firmwareversion < FIRMWARE_VERSION(5, 0, 0)) {
msg_pwarn("Skipping to set SPI speed because firmware is too old.\n");
return 0;
}
const struct dediprog_spispeeds *spispeed = &spispeeds[spispeed_idx];
msg_pdbg("SPI speed is %sHz\n", spispeed->name);
int ret = dediprog_write(dp_data->handle, CMD_SET_SPI_CLK, spispeed->speed, 0, NULL, 0);
if (ret != 0x0) {
msg_perr("Command Set SPI Speed 0x%x failed!\n", spispeed->speed);
return 1;
}
return 0;
}
static int prepare_rw_cmd(
struct flashctx *const flash, uint8_t *data_packet, unsigned int count,
uint8_t dedi_spi_cmd, unsigned int *value, unsigned int *idx, unsigned int start, int is_read)
{
const struct dediprog_data *dp_data = flash->mst->spi.data;
if (count >= 1 << 16) {
msg_perr("%s: Unsupported transfer length of %u blocks! "
"Please report a bug at flashrom@flashrom.org\n",
__func__, count);
return 1;
}
/* First 5 bytes are common in both generations. */
data_packet[0] = count & 0xff;
data_packet[1] = (count >> 8) & 0xff;
data_packet[2] = 0; /* RFU */
data_packet[3] = dedi_spi_cmd; /* Read/Write Mode (currently READ_MODE_STD, WRITE_MODE_PAGE_PGM or WRITE_MODE_2B_AAI) */
data_packet[4] = 0; /* "Opcode". Specs imply necessity only for READ_MODE_4B_ADDR_FAST and WRITE_MODE_4B_ADDR_256B_PAGE_PGM */
if (protocol(dp_data) >= PROTOCOL_V2) {
if (is_read && flash->chip->feature_bits & FEATURE_4BA_FAST_READ) {
data_packet[3] = READ_MODE_4B_ADDR_FAST_0x0C;
data_packet[4] = JEDEC_READ_4BA_FAST;
} else if (dedi_spi_cmd == WRITE_MODE_PAGE_PGM
&& (flash->chip->feature_bits & FEATURE_4BA_WRITE)) {
data_packet[3] = WRITE_MODE_4B_ADDR_256B_PAGE_PGM_0x12;
data_packet[4] = JEDEC_BYTE_PROGRAM_4BA;
}
*value = *idx = 0;
data_packet[5] = 0; /* RFU */
data_packet[6] = (start >> 0) & 0xff;
data_packet[7] = (start >> 8) & 0xff;
data_packet[8] = (start >> 16) & 0xff;
data_packet[9] = (start >> 24) & 0xff;
if (protocol(dp_data) >= PROTOCOL_V3) {
if (is_read) {
data_packet[10] = 0x00; /* address length (3 or 4) */
data_packet[11] = 0x00; /* dummy cycle / 2 */
} else {
/* 16 LSBs and 16 HSBs of page size */
/* FIXME: This assumes page size of 256. */
data_packet[10] = 0x00;
data_packet[11] = 0x01;
data_packet[12] = 0x00;
data_packet[13] = 0x00;
}
}
} else {
if (flash->chip->feature_bits & FEATURE_4BA_EAR_ANY) {
if (spi_set_extended_address(flash, start >> 24))
return 1;
} else if (start >> 24) {
msg_cerr("Can't handle 4-byte address with dediprog.\n");
return 1;
}
/*
* We don't know how the dediprog firmware handles 4-byte
* addresses. So let's not tell it what we are doing and
* only send the lower 3 bytes.
*/
*value = start & 0xffff;
*idx = (start >> 16) & 0xff;
}
return 0;
}
/* Bulk read interface, will read multiple 512 byte chunks aligned to 512 bytes.
* @start start address
* @len length
* @return 0 on success, 1 on failure
*/
static int dediprog_spi_bulk_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len)
{
int err = 1;
const struct dediprog_data *dp_data = flash->mst->spi.data;
/* chunksize must be 512, other sizes will NOT work at all. */
const unsigned int chunksize = 512;
const unsigned int count = len / chunksize;
struct dediprog_transfer_status status = { 0, 0, 0 };
struct libusb_transfer *transfers[DEDIPROG_ASYNC_TRANSFERS] = { NULL, };
struct libusb_transfer *transfer;
if (len == 0)
return 0;
if ((start % chunksize) || (len % chunksize)) {
msg_perr("%s: Unaligned start=%i, len=%i! Please report a bug at flashrom@flashrom.org\n",
__func__, start, len);
return 1;
}
int command_packet_size;
switch (protocol(dp_data)) {
case PROTOCOL_V1:
command_packet_size = 5;
break;
case PROTOCOL_V2:
command_packet_size = 10;
break;
case PROTOCOL_V3:
command_packet_size = 12;
break;
default:
return 1;
}
uint8_t data_packet[command_packet_size];
unsigned int value, idx;
if (prepare_rw_cmd(flash, data_packet, count, READ_MODE_STD, &value, &idx, start, 1))
return 1;
int ret = dediprog_write(dp_data->handle, CMD_READ, value, idx, data_packet, sizeof(data_packet));
if (ret != (int)sizeof(data_packet)) {
msg_perr("Command Read SPI Bulk failed, %i %s!\n", ret, libusb_error_name(ret));
return 1;
}
/*
* Ring buffer of bulk transfers.
* Poll until at least one transfer is ready,
* schedule next transfers until buffer is full.
*/
/* Allocate bulk transfers. */
unsigned int i;
for (i = 0; i < MIN(DEDIPROG_ASYNC_TRANSFERS, count); ++i) {
transfers[i] = libusb_alloc_transfer(0);
if (!transfers[i]) {
msg_perr("Allocating libusb transfer %i failed: %s!\n", i, libusb_error_name(ret));
goto err_free;
}
}
/* Now transfer requested chunks using libusb's asynchronous interface. */
while (!status.error && (status.queued_idx < count)) {
while ((status.queued_idx < count) &&
(status.queued_idx - status.finished_idx) < DEDIPROG_ASYNC_TRANSFERS)
{
transfer = transfers[status.queued_idx % DEDIPROG_ASYNC_TRANSFERS];
libusb_fill_bulk_transfer(transfer, dp_data->handle, 0x80 | dp_data->in_endpoint,
(unsigned char *)buf + status.queued_idx * chunksize, chunksize,
dediprog_bulk_read_cb, &status, DEFAULT_TIMEOUT);
transfer->flags |= LIBUSB_TRANSFER_SHORT_NOT_OK;
ret = libusb_submit_transfer(transfer);
if (ret < 0) {
msg_perr("Submitting SPI bulk read %i failed: %s!\n",
status.queued_idx, libusb_error_name(ret));
goto err_free;
}
++status.queued_idx;
}
if (dediprog_bulk_read_poll(dp_data->usb_ctx, &status, 0))
goto err_free;
}
/* Wait for transfers to finish. */
if (dediprog_bulk_read_poll(dp_data->usb_ctx, &status, 1))
goto err_free;
/* Check if everything has been transmitted. */
if ((status.finished_idx < count) || status.error)
goto err_free;
err = 0;
err_free:
dediprog_bulk_read_poll(dp_data->usb_ctx, &status, 1);
for (i = 0; i < DEDIPROG_ASYNC_TRANSFERS; ++i)
if (transfers[i]) libusb_free_transfer(transfers[i]);
return err;
}
static int dediprog_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len)
{
int ret;
/* chunksize must be 512, other sizes will NOT work at all. */
const unsigned int chunksize = 0x200;
unsigned int residue = start % chunksize ? min(len, chunksize - start % chunksize) : 0;
unsigned int bulklen;
const struct dediprog_data *dp_data = flash->mst->spi.data;
dediprog_set_leds(LED_BUSY, dp_data);
if (residue) {
msg_pdbg("Slow read for partial block from 0x%x, length 0x%x\n",
start, residue);
ret = default_spi_read(flash, buf, start, residue);
if (ret)
goto err;
}
/* Round down. */
bulklen = (len - residue) / chunksize * chunksize;
ret = dediprog_spi_bulk_read(flash, buf + residue, start + residue, bulklen);
if (ret)
goto err;
len -= residue + bulklen;
if (len != 0) {
msg_pdbg("Slow read for partial block from 0x%x, length 0x%x\n",
start, len);
ret = default_spi_read(flash, buf + residue + bulklen,
start + residue + bulklen, len);
if (ret)
goto err;
}
dediprog_set_leds(LED_PASS, dp_data);
return 0;
err:
dediprog_set_leds(LED_ERROR, dp_data);
return ret;
}
/* Bulk write interface, will write multiple chunksize byte chunks aligned to chunksize bytes.
* @chunksize length of data chunks, only 256 supported by now
* @start start address
* @len length
* @dedi_spi_cmd dediprog specific write command for spi bus
* @return 0 on success, 1 on failure
*/
static int dediprog_spi_bulk_write(struct flashctx *flash, const uint8_t *buf, unsigned int chunksize,
unsigned int start, unsigned int len, uint8_t dedi_spi_cmd)
{
/* USB transfer size must be 512, other sizes will NOT work at all.
* chunksize is the real data size per USB bulk transfer. The remaining
* space in a USB bulk transfer must be filled with 0xff padding.
*/
const unsigned int count = len / chunksize;
const struct dediprog_data *dp_data = flash->mst->spi.data;
/*
* We should change this check to
* chunksize > 512
* once we know how to handle different chunk sizes.
*/
if (chunksize != 256) {
msg_perr("%s: Chunk sizes other than 256 bytes are unsupported, chunksize=%u!\n"
"Please report a bug at flashrom@flashrom.org\n", __func__, chunksize);
return 1;
}
if ((start % chunksize) || (len % chunksize)) {
msg_perr("%s: Unaligned start=%i, len=%i! Please report a bug "
"at flashrom@flashrom.org\n", __func__, start, len);
return 1;
}
/* No idea if the hardware can handle empty writes, so chicken out. */
if (len == 0)
return 0;
int command_packet_size;
switch (protocol(dp_data)) {
case PROTOCOL_V1:
command_packet_size = 5;
break;
case PROTOCOL_V2:
command_packet_size = 10;
break;
case PROTOCOL_V3:
command_packet_size = 14;
break;
default:
return 1;
}
uint8_t data_packet[command_packet_size];
unsigned int value, idx;
if (prepare_rw_cmd(flash, data_packet, count, dedi_spi_cmd, &value, &idx, start, 0))
return 1;
int ret = dediprog_write(dp_data->handle, CMD_WRITE, value, idx, data_packet, sizeof(data_packet));
if (ret != (int)sizeof(data_packet)) {
msg_perr("Command Write SPI Bulk failed, %s!\n", libusb_error_name(ret));
return 1;
}
unsigned int i;
for (i = 0; i < count; i++) {
unsigned char usbbuf[512];
memcpy(usbbuf, buf + i * chunksize, chunksize);
memset(usbbuf + chunksize, 0xff, sizeof(usbbuf) - chunksize); // fill up with 0xFF
int transferred;
ret = libusb_bulk_transfer(dp_data->handle, dp_data->out_endpoint, usbbuf, 512, &transferred,
DEFAULT_TIMEOUT);
if ((ret < 0) || (transferred != 512)) {
msg_perr("SPI bulk write failed, expected %i, got %s!\n", 512, libusb_error_name(ret));
return 1;
}
update_progress(flash, FLASHROM_PROGRESS_WRITE, i + 1, count);
}
return 0;
}
static int dediprog_spi_write(struct flashctx *flash, const uint8_t *buf,
unsigned int start, unsigned int len, uint8_t dedi_spi_cmd)
{
int ret;
const unsigned int chunksize = flash->chip->page_size;
unsigned int residue = start % chunksize ? chunksize - start % chunksize : 0;
unsigned int bulklen;
const struct dediprog_data *dp_data = flash->mst->spi.data;
dediprog_set_leds(LED_BUSY, dp_data);
if (chunksize != 256) {
msg_pdbg("Page sizes other than 256 bytes are unsupported as "
"we don't know how dediprog\nhandles them.\n");
/* Write everything like it was residue. */
residue = len;
}
if (residue) {
msg_pdbg("Slow write for partial block from 0x%x, length 0x%x\n",
start, residue);
/* No idea about the real limit. Maybe 16 including command and address, maybe more. */
ret = spi_write_chunked(flash, buf, start, residue, 11);
if (ret) {
dediprog_set_leds(LED_ERROR, dp_data);
return ret;
}
}
/* Round down. */
bulklen = (len - residue) / chunksize * chunksize;
ret = dediprog_spi_bulk_write(flash, buf + residue, chunksize, start + residue, bulklen, dedi_spi_cmd);
if (ret) {
dediprog_set_leds(LED_ERROR, dp_data);
return ret;
}
len -= residue + bulklen;
if (len) {
msg_pdbg("Slow write for partial block from 0x%x, length 0x%x\n",
start, len);
ret = spi_write_chunked(flash, buf + residue + bulklen,
start + residue + bulklen, len, 11);
if (ret) {
dediprog_set_leds(LED_ERROR, dp_data);
return ret;
}
}
dediprog_set_leds(LED_PASS, dp_data);
return 0;
}
static int dediprog_spi_write_256(struct flashctx *flash, const uint8_t *buf, unsigned int start, unsigned int len)
{
return dediprog_spi_write(flash, buf, start, len, WRITE_MODE_PAGE_PGM);
}
static int dediprog_spi_write_aai(struct flashctx *flash, const uint8_t *buf, unsigned int start, unsigned int len)
{
return dediprog_spi_write(flash, buf, start, len, WRITE_MODE_2B_AAI);
}
static int dediprog_spi_send_command(const struct flashctx *flash,
unsigned int writecnt,
unsigned int readcnt,
const unsigned char *writearr,
unsigned char *readarr)
{
int ret;
const struct dediprog_data *dp_data = flash->mst->spi.data;
msg_pspew("%s, writecnt=%i, readcnt=%i\n", __func__, writecnt, readcnt);
if (writecnt > flash->mst->spi.max_data_write) {
msg_perr("Invalid writecnt=%i, aborting.\n", writecnt);
return 1;
}
if (readcnt > flash->mst->spi.max_data_read) {
msg_perr("Invalid readcnt=%i, aborting.\n", readcnt);
return 1;
}
unsigned int idx, value;
/* New protocol has options and timeout combined as value while the old one used the value field for
* timeout and the index field for options. */
if (protocol(dp_data) >= PROTOCOL_V2) {
idx = 0;
value = readcnt ? 0x1 : 0x0; // Indicate if we require a read
} else {
idx = readcnt ? 0x1 : 0x0; // Indicate if we require a read
value = 0;
}
ret = dediprog_write(dp_data->handle, CMD_TRANSCEIVE, value, idx, writearr, writecnt);
if (ret != (int)writecnt) {
msg_perr("Send SPI failed, expected %i, got %i %s!\n",
writecnt, ret, libusb_error_name(ret));
return 1;
}
if (readcnt == 0) // If we don't require a response, we are done here
return 0;
/* The specifications do state the possibility to set a timeout for transceive transactions.
* Apparently the "timeout" is a delay, and you can use long delays to accelerate writing - in case you
* can predict the time needed by the previous command or so (untested). In any case, using this
* "feature" to set sane-looking timouts for the read below will completely trash performance with
* SF600 and/or firmwares >= 6.0 while they seem to be benign on SF100 with firmwares <= 5.5.2. *shrug*
*
* The specification also uses only 0 in its examples, so the lesson to learn here:
* "Never trust the description of an interface in the documentation but use the example code and pray."
const uint8_t read_timeout = 10 + readcnt/512;
if (protocol() >= PROTOCOL_V2) {
idx = 0;
value = min(read_timeout, 0xFF) | (0 << 8) ; // Timeout in lower byte, option in upper byte
} else {
idx = (0 & 0xFF); // Lower byte is option (0x01 = require SR, 0x02 keep CS low)
value = min(read_timeout, 0xFF); // Possibly two bytes but we play safe here
}
ret = dediprog_read(dp_data->dediprog_handle, CMD_TRANSCEIVE, value, idx, readarr, readcnt);
*/
ret = dediprog_read(dp_data->handle, CMD_TRANSCEIVE, 0, 0, readarr, readcnt);
if (ret != (int)readcnt) {
msg_perr("Receive SPI failed, expected %i, got %i %s!\n", readcnt, ret, libusb_error_name(ret));
return 1;
}
return 0;
}
static int dediprog_check_devicestring(struct dediprog_data *dp_data)
{
int ret;
char buf[0x11];
/* Command Receive Device String. */
ret = dediprog_read(dp_data->handle, CMD_READ_PROG_INFO, 0, 0, (uint8_t *)buf, 0x10);
if (ret != 0x10) {
msg_perr("Incomplete/failed Command Receive Device String!\n");
return 1;
}
buf[0x10] = '\0';
msg_pdbg("Found a %s\n", buf);
if (memcmp(buf, "SF100", 0x5) == 0)
dp_data->devicetype = DEV_SF100;
else if (memcmp(buf, "SF200", 0x5) == 0)
dp_data->devicetype = DEV_SF200;
else if (memcmp(buf, "SF600", 0x5) == 0)
dp_data->devicetype = DEV_SF600;
else {
msg_perr("Device not a SF100, SF200, or SF600!\n");
return 1;
}
int sfnum;
int fw[3];
if (sscanf(buf, "SF%d V:%d.%d.%d ", &sfnum, &fw[0], &fw[1], &fw[2]) != 4 ||
sfnum != (int)dp_data->devicetype) {
msg_perr("Unexpected firmware version string '%s'\n", buf);
return 1;
}
/* Only these major versions were tested. */
if (fw[0] < 2 || fw[0] > 7) {
msg_perr("Unexpected firmware version %d.%d.%d!\n", fw[0], fw[1], fw[2]);
return 1;
}
dp_data->firmwareversion = FIRMWARE_VERSION(fw[0], fw[1], fw[2]);
if (protocol(dp_data) == PROTOCOL_UNKNOWN) {
msg_perr("Internal error: Unable to determine protocol version.\n");
return 1;
}
return 0;
}
/*
* Read the id from the dediprog. This should return the numeric part of the
* serial number found on a sticker on the back of the dediprog. Note this
* number is stored in writable eeprom, so it could get out of sync. Also note,
* this function only supports SF100 at this time, but SF600 support is not too
* much different.
* @return the id on success, -1 on failure
*/
static int dediprog_read_id(libusb_device_handle *dediprog_handle)
{
int ret;
uint8_t buf[3];
ret = libusb_control_transfer(dediprog_handle, REQTYPE_OTHER_IN,
0x7, /* request */
0, /* value */
0xEF00, /* index */
buf, sizeof(buf),
DEFAULT_TIMEOUT);
if (ret != sizeof(buf)) {
msg_perr("Failed to read dediprog id, error %d!\n", ret);
return -1;
}
return buf[0] << 16 | buf[1] << 8 | buf[2];
}
/*
* This command presumably sets the voltage for the SF100 itself (not the
* SPI flash). Only use this command with firmware older than V6.0.0. Newer
* (including all SF600s) do not support it.
*/
/* This command presumably sets the voltage for the SF100 itself (not the SPI flash).
* Only use dediprog_set_voltage on SF100 programmers with firmware older
* than V6.0.0. Newer programmers (including all SF600s) do not support it. */
static int dediprog_set_voltage(libusb_device_handle *dediprog_handle)
{
unsigned char buf[1] = {0};
int ret = libusb_control_transfer(dediprog_handle, REQTYPE_OTHER_IN, CMD_SET_VOLTAGE, 0x0, 0x0,
buf, 0x1, DEFAULT_TIMEOUT);
if (ret < 0) {
msg_perr("Command Set Voltage failed (%s)!\n", libusb_error_name(ret));
return 1;
}
if ((ret != 1) || (buf[0] != 0x6f)) {
msg_perr("Unexpected response to init!\n");
return 1;
}
return 0;
}
static int dediprog_standalone_mode(const struct dediprog_data *dp_data)
{
int ret;
if (dp_data->devicetype != DEV_SF600)
return 0;
msg_pdbg2("Disabling standalone mode.\n");
ret = dediprog_write(dp_data->handle, CMD_SET_STANDALONE, LEAVE_STANDALONE_MODE, 0, NULL, 0);
if (ret) {
msg_perr("Failed to disable standalone mode: %s\n", libusb_error_name(ret));
return 1;
}
return 0;
}
#if 0
/* Something.
* Present in eng_detect_blink.log with firmware 3.1.8
* Always preceded by Command Receive Device String
*/
static int dediprog_command_b(libusb_device_handle *dediprog_handle)
{
int ret;
char buf[0x3];
ret = usb_control_msg(dediprog_handle, REQTYPE_OTHER_IN, 0x7, 0x0, 0xef00,
buf, 0x3, DEFAULT_TIMEOUT);
if (ret < 0) {
msg_perr("Command B failed (%s)!\n", libusb_error_name(ret));
return 1;
}
if ((ret != 0x3) || (buf[0] != 0xff) || (buf[1] != 0xff) ||
(buf[2] != 0xff)) {
msg_perr("Unexpected response to Command B!\n");
return 1;
}
return 0;
}
#endif
static int set_target_flash(libusb_device_handle *dediprog_handle, enum dediprog_target target)
{
int ret = dediprog_write(dediprog_handle, CMD_SET_TARGET, target, 0, NULL, 0);
if (ret != 0) {
msg_perr("set_target_flash failed (%s)!\n", libusb_error_name(ret));
return 1;
}
return 0;
}
#if 0
/* Returns true if the button is currently pressed. */
static bool dediprog_get_button(libusb_device_handle *dediprog_handle)
{
char buf[1];
int ret = usb_control_msg(dediprog_handle, REQTYPE_EP_IN, CMD_GET_BUTTON, 0, 0,
buf, 0x1, DEFAULT_TIMEOUT);
if (ret != 0) {
msg_perr("Could not get button state (%s)!\n", libusb_error_name(ret));
return 1;
}
return buf[0] != 1;
}
#endif
static int parse_voltage(char *voltage)
{
char *tmp = NULL;
int i;
int millivolt = 0, fraction = 0;
if (!voltage || !strlen(voltage)) {
msg_perr("Empty voltage= specified.\n");
return -1;
}
millivolt = (int)strtol(voltage, &tmp, 0);
voltage = tmp;
/* Handle "," and "." as decimal point. Everything after it is assumed
* to be in decimal notation.
*/
if ((*voltage == '.') || (*voltage == ',')) {
voltage++;
for (i = 0; i < 3; i++) {
fraction *= 10;
/* Don't advance if the current character is invalid,
* but continue multiplying.
*/
if ((*voltage < '0') || (*voltage > '9'))
continue;
fraction += *voltage - '0';
voltage++;
}
/* Throw away remaining digits. */
voltage += strspn(voltage, "0123456789");
}
/* The remaining string must be empty or "mV" or "V". */
tolower_string(voltage);
/* No unit or "V". */
if ((*voltage == '\0') || !strncmp(voltage, "v", 1)) {
millivolt *= 1000;
millivolt += fraction;
} else if (!strncmp(voltage, "mv", 2) ||
!strncmp(voltage, "milliv", 6)) {
/* No adjustment. fraction is discarded. */